DigestedDataStream ("Entrust Authority Security Toolkit for the Java Platform")

java.lang.Object
- iaik.cms.DigestedDataStream

All Implemented Interfaces:

EncodeListener, ContentStream, EOFListener, java.util.EventListener

Direct Known Subclasses:

DigestedData
```
public class DigestedDataStream
extends java.lang.Object
implements ContentStream, EncodeListener, EOFListener
```
This class represents the stream supporting implementation of the CMS DigestedData type.
Each CMS content type is associated with a specific object identifier, derived from:
```
 pkcs-7 OBJECT IDENTIFIER ::=
   { iso(1) member-body(2) US(840) rsadsi(113549)
       pkcs(1) 7 }
 
```
The object identifier for the DigestedData content type is defined as:
digestedData OBJECT IDENTIFIER ::= { pkcs-7 5 }
which corresponds to the OID string "1.2.840.1.113549.1.7.5".
The Cryptographic Message Syntax (CMS, RFC 2630) specifies the DigestedData content type for providing a syntax for building message digests. The digested-data content type consists of content of any type and a message digest of the content:
```
 DigestedData ::= SEQUENCE {
    version            Version,
    digestAlgorithm    DigestAlgorithmIdentifier,
    encapContentInfo   EncapsulatedContentInfo,
    digest             Digest }
 

 Digest ::= OCTET STRING
 
```
The digestAlgorithm field specifies the digest algorithm to be used for computing the message digest of the content given in theencapContentInfo field. The result of the digest calculation is stored in the digest field. Verifying a received message digest is done by comparing it with an independently computed message digest.

When creating a DigestedDataStream object for the content to be digested by using the DigestedDataStream(InputStream data_is, AlgorithmID digestAlgorithm, int mode) constructor, additionally the transimission mode has to be specified. If the mode is set to DigestedDataStream.IMPLICIT the raw data will be included in the DigestedData message to be transmitted, but it will be not included if the mode is set to DigestedDataStream.EXPLICIT. However, in both cases the raw data has to be supplied when creating the DigestedDataStream object, because it is needed for the digest computation:
```
 InputSrteam data_stream = ...; // the raw data supplying input stream
 AlgorithmID digestAlg = ...;
 DigestedDataStream digested_data = new DigestedDataStream(data_stream, digestAlg, DigestedDataStream.IMPLICIT);
 
```
respectively
```
 DigestedDataStream digested_data = new DigestedDataStream(data_stream, digestAlg, DigestedDataStream.EXPLICIT);
 
```
In contrast to the non-stream-variant of the CMS DigestedData type (implemented by the DigestedData class), where explicit and implicit mode can be handled in the same way when creating a DigestedData object, they require a different proceeding for the stream-supporting DigestedDataStream class. In this way, the steps for creating a DigestedDataStream object and preparing it for transmission can be summarized in the following way:
1. Create a new DigestedDataStream object thereby supplying the raw data to be digested as input stream and specifying digest algorithm and transmission mode to be used (either DigestedDataStream.IMPLICIT or DigestedDataStream.EXPLICIT):
```
     InputStream data_stream = ...;
     int mode = ...;
     AlgorithmID digestAlg = ...;
     DigestedDataStream digested_data = new DigestedDataStream(data_stream, digestAlg, mode);
     
```
2. If the chosen mode is DigestedDataStream.EXPLICIT, now get and read the data from the data carrying input stream. Since in explicit mode the raw data is not included in the DigestedData message, the stream has to be read before actually performing the encoding. When reading the stream, the data is piped a digest stream for updating the hash computation.
```
     if (mode == DigestedDataStream.EXPLICIT) {
       InputStream data_is = digested_data.getInputStream();
       byte[] buf = new byte[1024];
       int r;
       while ((r = data_is.read(buf)) > 0) {
         // do something useful
       }
     }
     
```
  When using the implicit mode, do not explicitly read data from the input stream at all! This will be done automatically during the last step when performing the encoding.
3. Use a proper writeTo method for BER encoding the the DigestedDataStream object and writing it to an output stream. You optionally may specify a particular block size for splitting the data encoding:
```
     int blockSize = ...;
     digested_data.writeTo(output_stream, blockSize);
     
```
  respectively
```
     digested_data.writeTo(output_stream);
     
```
  It is recommended only to use the writeTo method where a particular block size can be specified, because it is the intended purpose of this stream-supporting DigestedData implementation to handle large amounts of data. When no block size is specified whole the raw data is encoded as one primitive definite octet string, which advantageously may be done when using the non-stream supporting DigestedData implementation. When a positve block size is specified for encoding the DigestedData to a stream, the raw data is BER encoded as indefinite constructed octet string being composed of a series of definite primitive encoded octet strings of blockSize length, e.g.:
```
     0x24 0x80
               0x04 0x02 0x01 0xAB
               0x04 0x02 0x23 0x7F
               0x04 0x01 0xCA
     0x00 0x00
     
```
  instead of:
```
     0x04 0x05 0x01 0xAB 0x23 0x7F 0xCA
     
```
  for encoding the five data bytes 0x01 0xAB 0x23 0x7F 0xCA.
Again, it has to be distinguished between IMPLICIT and EXPLICIT mode when using the DigestedDataStream implementation for parsing a received DigestedData message. When operating in IMPLICIT mode, the raw data is included in the received DigestedData object, and so the parsing immediately may be performed when creating a DigestedDataStream object from the BER encoded DigestedData object by calling the DigestedDataStream(InputStream is) constructor. On the other side, when the raw data has been transmitted outside the DigestedData message (EXPLICIT mode), the DigestedDataStream(InputStream data_is, AlgorithmID digestAlgorithm) constructor has to be used for initializing the new DigestedDataStream object with raw data and hash algorithm to be used for digest computation; and the decoding has to be performed explicitly by calling the decode method. The initialization is necessary for preparing the digest computation on the raw data for the specified digest algorithm. Later, during digest verification the digest value computaion is finished and the result is compared against the hash value sent within the final digest field.
The individual steps necessary for parsing a received DigestedData message and verifying the digest may be summarized as follows:
1. If the InputStream supplies the BER encoding of an implicit DigestedData object, use the DigestedDataStream(InputStream is) constructor for creating a DigestedDataStream object and implicitly performing the decoding:
```
     DigestedDataStream digestedData = new DigestedDataStream(encoded_stream);
     
```
  On the other hand, if the BER encoding represents an explicit DigestedData object, use the DigestedDataStream(InputStream data_is, AlgorithmID digestAlgorithm) constructor for initializing a new DigestedDataStream object with raw data and digest algorithm for hash computation (assuming that the hash algorithm is SHA-1):
```
     AlgorithmID algID = AlgorithmID.sha1;
     DigestedDataStream digestedData = new DigestedDataStream(data_is, algID);
     
```
2. Get the data carrying input stream and entirely read the data from the stream. This has to be performed for both implicit and explicit modes at exactly this state of the parsing procedure. In both cases the constructor has initialized the digest computation by wrapping digest streams around the raw data stream for the given digest algorithm, either implicitly parsed from the supplied DigestedData object, or explicitly supplied as via the constructor. When now reading the stream, the data is piped through the digest stream for updating the hash computation:
```
     InputStream dataIs = digestedDdata.getInputStream();
     byte[] buf = new byte[1024];
     int r;
     while ((r = dataIs.read(buf)) > 0) {
       // do something useful
     }
     
```
3. When dealing with an explicit message now explicitly perform the decoding by calling the decode method:
```
     digestedData.decode(encoded_stream);
     
```
4. Now it´s time to call the verify method for comparing the computed digest against the value sent in the digest field:
```
     if (digestedData.verify())
        System.out.println("Hash o.k!");
     else
        System.out.println("hash verification failed!");
     
```

Field Summary

Fields
Modifier and Type	Field and Description
`protected int`	`blockSize_` The block size for block oriented stream encoding.
`protected ObjectID`	`contentType_` The content type.
`protected AlgorithmID`	`digestAlgorithm_` The digest algorithm to use.
`protected EncapsulatedContentInfoStream`	`encapContentInfo_` The inherent EncapsualtedContentInfo.
`static int`	`EXPLICIT` Denotes a mode where the data to be digested is not included.
`static int`	`IMPLICIT` Denotes a mode where the data to be digested is included.
`protected java.io.InputStream`	`inputStream_` An InputStream holding the data.
`protected int`	`mode_` The mode specifying if the data shall be included (IMPLICIT), or if is not included (EXPLICIT).
`protected int`	`version_` The CMS version number.

Constructor Summary

Constructors
Modifier	Constructor and Description
`protected`	`DigestedDataStream()` Default constructor for dynamic object creation in ContentInfoStream.
	`DigestedDataStream(java.io.InputStream is)` Creates a DigestedDataStream object from an InputStream.
	`DigestedDataStream(java.io.InputStream data_is, AlgorithmID digestAlgorithm)` Creates a new DigestedDataStream from an InputStream holding the content that has been transmitted by other means, and the hash algorithm to be used for digesting.
	`DigestedDataStream(java.io.InputStream data_is, AlgorithmID digestAlgorithm, int mode)` Creates a new `DigestedDataStream` object from given content and and digest algorithm.
	`DigestedDataStream(ObjectID contentType, AlgorithmID digestAlgorithm, byte[] digest)` Creates a new `DigestedDataStream` object without content.
	`DigestedDataStream(ObjectID contentType, java.io.InputStream data_is, AlgorithmID digestAlgorithm, int mode)` Creates a new `DigestedDataStream` object from given content and and digest algorithm.

Method Summary

Methods
Modifier and Type	Method and Description
`void`	`decode(java.io.InputStream is)` Reads and decodes a BER encoded DigestedData from an input stream.
`void`	`encodeCalled(ASN1Object o, int id)` This method implements the EncodeListener interface.
`int`	`getBlockSize()` Gets the block size defining the length of each definite primitive encoded octet string component.
`ObjectID`	`getContentType()` Returns the content type this class implements.
`byte[]`	`getDigest()` Returns the message-digest computed on the content value.
`AlgorithmID`	`getDigestAlgorithm()` Returns the message-digest algorithm used for computing the digest.
`ObjectID`	`getEncapsulatedContentType()` Returns the content type the inherent EncapsulatetContentInfo represents.
`java.io.InputStream`	`getInputStream()` Returns an input stream with the raw data.
`int`	`getVersion()` Returns the version syntax number.
`void`	`notifyEOF()` This method implements the EOFListener interface for performing the final decoding.
`void`	`setBlockSize(int blockSize)` Sets the block size for defining the length of each definite primitive encoded octet string component.
`void`	`setDigest(byte[] digest)` Sets the message-digest value.
`ASN1Object`	`toASN1Object()` Returns this DigestedDataStream as ASN1Object.
`protected ASN1Object`	`toASN1Object(int blockSize)` Returns this DigestedData as ASN1Object where a constructed OCTET STRING is used for encoding the content.
`java.lang.String`	`toString()` Returns a string giving some information about this `DigestedData` object.
`java.lang.String`	`toString(boolean detailed)` Returns a string giving some - if requested - detailed information about this `DigestedData` object.
`boolean`	`verify()` Verifies the digest.
`void`	`writeTo(java.io.OutputStream os)` Writes this DigestedData DER encoded to the supplied output stream.
`void`	`writeTo(java.io.OutputStream os, int blockSize)` Writes this object to the supplied output stream where a constructed OCTET STRING is used for encoding the content.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Field Detail
  - IMPLICIT
```
public static final int IMPLICIT
```
    Denotes a mode where the data to be digested is included.
    
    See Also:
    Constant Field Values
  - EXPLICIT
```
public static final int EXPLICIT
```
    Denotes a mode where the data to be digested is not included.
    
    See Also:
    Constant Field Values
  - version_
```
protected int version_
```
    The CMS version number. Default: 0.
  - digestAlgorithm_
```
protected AlgorithmID digestAlgorithm_
```
    The digest algorithm to use.
  - contentType_
```
protected ObjectID contentType_
```
    The content type.
  - blockSize_
```
protected int blockSize_
```
    The block size for block oriented stream encoding.
  - encapContentInfo_
```
protected EncapsulatedContentInfoStream encapContentInfo_
```
    The inherent EncapsualtedContentInfo.
  - inputStream_
```
protected java.io.InputStream inputStream_
```
    An InputStream holding the data.
  - mode_
```
protected int mode_
```
    The mode specifying if the data shall be included (IMPLICIT), or if is not included (EXPLICIT).
- Constructor Detail
  - DigestedDataStream
```
protected DigestedDataStream()
```
    Default constructor for dynamic object creation in ContentInfoStream. Shall be not used by an application.
  - DigestedDataStream
```
public DigestedDataStream(java.io.InputStream data_is,
                  AlgorithmID digestAlgorithm,
                  int mode)
                   throws CMSException
```
    Creates a new DigestedDataStream object from given content and and digest algorithm. The data to be digested is supplied as input stream. The mode parameter specifies whether to include the data (mode = DigestedDataStream.IMPLICIT) or not include it (mode = DigestedDataStream.EXPLICIT). The content type of the inherent ContentInfo automatically is set to CMS Data.
    
    Parameters:
    data_is - the data to be digested supplied from an input stream
    digestAlgorithm - the message-digest algorithm to be used for creating the digest
    mode - either DigestedDataStream.IMPLICIT for including the data, or DigestedDataStream.EXPLICIT for not including it
    
    Throws:
    
    CMSException - if the supplied paramteres to not satisfy the requirements ot there is no implementation for the requested hash algorithm
  - DigestedDataStream
```
public DigestedDataStream(ObjectID contentType,
                  java.io.InputStream data_is,
                  AlgorithmID digestAlgorithm,
                  int mode)
                   throws CMSException
```
    Creates a new DigestedDataStream object from given content and and digest algorithm. The data to be digested is supplied as input stream. The mode parameter specifies whether to include the data (mode = DigestedDataStream.IMPLICIT) or not include it (mode = DigestedDataStream.EXPLICIT).
    
    Parameters:
    contentType - the content type of the data to be digested
    data_is - the data to be digested supplied from an input stream
    digestAlgorithm - the message-digest algorithm to be used for creating the digest
    mode - either DigestedDataStream.IMPLICIT for including the data, or DigestedDataStream.EXPLICIT for not including it
    
    Throws:
    
    CMSException - if the supplied paramteres to not satisfy the requirements ot there is no implementation for the requested hash algorithm
  - DigestedDataStream
```
public DigestedDataStream(ObjectID contentType,
                  AlgorithmID digestAlgorithm,
                  byte[] digest)
```
    Creates a new DigestedDataStream object without content.
    For instance:
```
 byte[] message = "Test data to be digested".getBytes();
 MessageDigest md = MessageDigest.getInstance("SHA", "IAIK");
 md.update(message);
 byte[] digest = md.digest();
 DigestedDataStream digested_data = new DigestedDataStream(ObjectID.cms_data, AlgorithmID.sha, digest);
 
```
    The content must be transfered by other means.
    Parameters:
    contentType - the content type of the digested data
    digestAlgorithm - the message-digest algorithm (and any associated parameters) used for creating the digest
    digest - the already calculated digest value
  - DigestedDataStream
```
public DigestedDataStream(java.io.InputStream is)
                   throws java.io.IOException,
                          CMSParsingException
```
    Creates a DigestedDataStream object from an InputStream.
    The given input stream supplies the BER encoding of an already existing CMS DigestedData object. This constructor shall be used for parsing a implict DigestedData object where the content is included.
    To initialize a DigestedDataStream object for parsing an explicit DigestedData message where the raw data is not included, use the DigestedDataStream(InputStream data_is, AlgorithmID hashAlgorithm) constructor, and perform the decoding explicitly by calling the decode method.
    A sender shall use the DigestedDataStream(InputStream data_is, AlgorithmID digestAlgorithm, int mode) constructor for supplying the content to be digested when creating a DigestedDataStream object.
    
    Parameters:
    is - the InputStream holding the BER encoded CMS DigestedData object
    
    Throws:
    
    java.io.IOException - if an error occurs when reasding from the stream
    
    CMSParsingException - if the object can not be parsed
  - DigestedDataStream
```
public DigestedDataStream(java.io.InputStream data_is,
                  AlgorithmID digestAlgorithm)
                   throws java.io.IOException
```
    Creates a new DigestedDataStream from an InputStream holding the content that has been transmitted by other means, and the hash algorithm to be used for digesting.
    Do not use this constructor for supplying the content value to be digested. This constructor may be used by the recipient for initializing the digest computation for an already existing explicit DigestedData message where the raw data is not included. The initialization is done by wrapping a digest stream around the supplied raw data stream for the specified hash algorithm. Subsequently the hash value will be updated when reading the stream thereby piping the data through the digest stream. Later, during digest verification the digest computaion is finished and the result is compared with the hash values derived parsed from the encoding.
    For an explicit message the actual decoding has to be performed by calling the decode method just after reading the data:
```
 // initialize for hash computation:
 DigestedDataStream digestedData = new DigestedDataStream(data_is, hashAlgorithm);
 //read the stream thereby updating the hash values:
 InputStream dataIs = digestedData.getInputStream();
 byte[] buf = new byte[1024];
 int r;
 while ((r = dataIs.read(buf)) > 0) {
   // do something useful
 }
 // explicitly perform the decoding
 digestedData.decode(encoded_stream);
 
```
    A sender shall use the DigestedDataStream(InputStream data_is, AlgorithmID digestAlgorithm, int mode) constructor for supplying the content to be digested when creating a DigestedDataStream object.
    For decoding an implicit DigestedDataStream message, use the DigestedDataStream(InputStream is) constructor.
    Parameters:
    data_is - the InputStream supplying the raw data which has been transmitted by other means
    hashAlgorithm - the hash algorithm used by for digesting the content data
    
    Throws:
    
    java.io.IOException - if there is no implementation for the specified hash algorithm
- Method Detail
  - decode
```
public void decode(java.io.InputStream is)
            throws java.io.IOException,
                   CMSParsingException
```
    Reads and decodes a BER encoded DigestedData from an input stream.
    
    Specified by:
    
    decode in interface ContentStream
    
    Parameters:
    is - the InputStream holding a BER encoded CMS DigestedData object
    
    Throws:
    
    java.io.IOException - if an I/O error occurs during reading from the InputStream
    
    CMSParsingException - if an error occurs while parsing the object
  - getContentType
```
public ObjectID getContentType()
```
    Returns the content type this class implements.
    
    Specified by:
    
    getContentType in interface ContentStream
    
    Returns:
    ObjectID.cms_digestedData
  - getEncapsulatedContentType
```
public ObjectID getEncapsulatedContentType()
```
    Returns the content type the inherent EncapsulatetContentInfo represents.
    
    Returns:
    the content type the inherent EncapsulatetContentInfo represents
  - getVersion
```
public int getVersion()
```
    Returns the version syntax number. At this time version 0 is implemented.
    
    Returns:
    the version syntax number
  - getDigestAlgorithm
```
public AlgorithmID getDigestAlgorithm()
```
    Returns the message-digest algorithm used for computing the digest.
    
    Returns:
    the ID of the message-digest algorithm
  - getDigest
```
public byte[] getDigest()
```
    Returns the message-digest computed on the content value.
    
    Returns:
    the message-digest, as byte array
  - setDigest
```
public void setDigest(byte[] digest)
```
    Sets the message-digest value. This method can be used to set a digest value that has been calculated outside this class.
    
    Parameters:
    digest - the digest value as byte array
  - setBlockSize
```
public void setBlockSize(int blockSize)
```
    Sets the block size for defining the length of each definite primitive encoded octet string component. If the value of blockSize is smaller or equal to zero the whole data is encoded as definite primitive octet string. This method may be used for enforcing block encoding when wrapping the DigestedData into a ContentInfo.
    
    Specified by:
    
    setBlockSize in interface ContentStream
    
    Parameters:
    blockSize - for defining the encoding scheme and setting the octet string component length, if positive
  - getBlockSize
```
public int getBlockSize()
```
    Gets the block size defining the length of each definite primitive encoded octet string component. If the value of blockSize is smaller or equal to zero the whole data is encoded as definite primitive octet string.
    
    Specified by:
    
    getBlockSize in interface ContentStream
    
    Returns:
    blockSize defining the encoding scheme and setting the octet string component length, if positive
  - getInputStream
```
public java.io.InputStream getInputStream()
```
    Returns an input stream with the raw data.
    
    Returns:
    an input stream with the raw data
  - toASN1Object
```
public ASN1Object toASN1Object()
                        throws CMSException
```
    Returns this DigestedDataStream as ASN1Object.
    
    Specified by:
    
    toASN1Object in interface ContentStream
    
    Returns:
    this DigestedDataStream as ASN1Object
    
    Throws:
    
    CMSException - if the ASN1Object could not be created
  - toASN1Object
```
protected ASN1Object toASN1Object(int blockSize)
                           throws CMSException
```
    Returns this DigestedData as ASN1Object where a constructed OCTET STRING is used for encoding the content.
    
    Parameters:
    blockSize - the block size defining the encoding scheme - and specifying the length of each primitive encoded octet string component, if positive
    
    Throws:
    
    CMSException - if the ASN1Object could not be created
  - encodeCalled
```
public void encodeCalled(ASN1Object o,
                int id)
                  throws CodingException
```
    This method implements the EncodeListener interface. During the encoding process the DerCoder calls this method when it actually is time for computing and setting the message digest to be encoded. In particular for the stream-supporting implementation of this DigestedData content type, the message digest cannot be computed before the content stream entirely has been read. Since the content stream actually is read during the encoding procedure, this class has to be notified when the content stream has been read. This is done by means of the IAIK-JCE EncodeListener utility. The toASN1Object() method of this DigestedDataStream class instantiates an empty OCTET_STRING for the digest field, and registers itself as EncodeListener for this empty OCTET_STRING. Now, during the encoding process, when the content stream entirely has been read, this encodeCalled method is called for performing digest computation. The supplied ASN1Object is the empty OCTET_STRING to be "filled" with the result of the digest-computation.
    
    Specified by:
    
    encodeCalled in interface EncodeListener
    
    Parameters:
    o - an OCTET_STRING for being supplied with the message digest value
    id - the id identifying the particular octet string to be processed
    
    Throws:
    
    CodingException - if an error occurs when computing/encrypting the message digest
  - notifyEOF
```
public void notifyEOF()
               throws java.io.IOException
```
    This method implements the EOFListener interface for performing the final decoding. Since the digest field is located at the end of a DigestedData structure, it only can be accessed after reading the data stream. For that reason, when starting the parsing of an implicit DigestedData message only version, digestAlgorithms, and encspContentInfo fields can be parsed before reading the data. Since the data is supplied from an input stream, an IAIK-JCE NotifyEOFInputStream is wrapped around this raw data stream for indicating that the parsing procedure is to be notified when the stream actually has been read. At that point, the programm exceuting automatically jumps to the actual notifyEOF method for finishing the decoding by parsing the final digest field.
    For any application it is strongly recommended not to explicitly call this method. This method only is qualified as public method since it implements the IAIK-JCE EOFListener interface.
    
    Specified by:
    
    notifyEOF in interface EOFListener
    
    Throws:
    
    java.io.IOException - if an error occurs while parsing the stream
  - verify
```
public boolean verify()
               throws CMSException
```
    Verifies the digest. This method finishes the hash computation on the data and compares it with the value received in the digest field.
    
    Returns:
    true if the hash verifies, false otherwise
    
    Throws:
    
    CMSException - if an error occurs during verification process
  - writeTo
```
public void writeTo(java.io.OutputStream os)
             throws java.io.IOException
```
    Writes this DigestedData DER encoded to the supplied output stream. If for the inherent content structure a positive blocksize has been specified, the content is encoded as indefinite constructed octet string.
    
    Parameters:
    os - the output stream to which this DigestedData shall be written
    
    Throws:
    
    java.io.IOException - if an IOException occurs while writing to the stream
  - writeTo
```
public void writeTo(java.io.OutputStream os,
           int blockSize)
             throws java.io.IOException
```
    Writes this object to the supplied output stream where a constructed OCTET STRING is used for encoding the content. If block size has a value > 0, in implicit mode the inherent raw data is encoded as constructed OCTET STRING. In this case the encoding is splitted according to the defined block size:
```
 0x24 0x80
           0x04 <blocksize> <data>
           0x04 <blocksize> <data>
           0x04 <blocksize> <data>
                ...
 0x00 0x00
 
```
    If the block size is not positive, whole the inherent data is encoded as one single primitive definite octet string:
```
 0x04 <length> <data>
 
```
    Parameters:
    os - the output stream to which this DigestedData shall be written
    blockSize - the block size defining the encoding scheme - and specifying the length of each primitive encoded octet string component, if positive
    
    Throws:
    
    java.io.IOException - if an error occurs during writing the object
  - toString
```
public java.lang.String toString()
```
    Returns a string giving some information about this DigestedData object.
    
    Overrides:
    
    toString in class java.lang.Object
    
    Returns:
    the string representation
  - toString
```
public java.lang.String toString(boolean detailed)
```
    Returns a string giving some - if requested - detailed information about this DigestedData object.
    
    Specified by:
    
    toString in interface ContentStream
    
    Parameters:
    detailed - - whether or not to give detailed information
    
    Returns:
    the string representation

Class DigestedDataStream

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

IMPLICIT

EXPLICIT

version_

digestAlgorithm_

contentType_

blockSize_

encapContentInfo_

inputStream_

mode_

Constructor Detail

DigestedDataStream

DigestedDataStream

DigestedDataStream

DigestedDataStream

DigestedDataStream

DigestedDataStream

Method Detail

decode

getContentType

getEncapsulatedContentType

getVersion

getDigestAlgorithm

getDigest

setDigest

setBlockSize

getBlockSize

getInputStream

toASN1Object

toASN1Object

encodeCalled

notifyEOF

verify

writeTo

writeTo

toString

toString