Management of toxic substances: industry forms

2-Butoxyethanol Regulations

Prohibition of Certain Toxic Substances Regulations, 2012

The following form must be used for the 2-Butoxyethanol Regulations

Schedule 2: Information to Be Contained in an Application for a Permit

This form is used to request a permit to manufacture or import a product set out in Schedule 1 of the 2-Butoxyethanol Regulations, in which the concentration of 2-butoxyethanol exceeds the limits set out in the same schedule. If at the time of coming into force of the Regulations, you are carrying out any of these activities, you must apply for a permit to continue the activity. If issued, the permit expires 24 months after the day it was issued and may only be extended once, upon application, for the same use of this product containing 2-butoxyethanol. The Minister may refuse or revoke a permit if there are grounds to believe that the applicant has provided false or misleading information.

This form is being offered as an online service and is available in Portable Document Format (PDF) only, as a signature is required. Once you have accessed the form, you must print the form and fill in the fields by hand for submission by mail.

Environment and Climate Change Canada
Attention: Director, Products Division
351 St. Joseph Blvd., 9th Floor
Gatineau, QC K1A 0H3
Fax: 888-391-3695 / 819-953-3132

For the PDF version, you must have a PDF reader on your computer. If you do not, see our Help on accessing documents in PDF format page.

For further information about the Regulations, you can contact:

Products Division
Tel.: 888-391-3426 / 819-953-9322
Fax: 888-391-3695 / 819-953-3132
Email: Products.Produits@ec.gc.ca

The following forms apply to the Prohibition of Certain Toxic Substances Regulations, 2012

Schedule 3: Information Related to the Use of Certain Toxic Substances in a Laboratory for Analysis, in Scientific Research or as a Laboratory Analytical Standard

This form is used to declare the current or anticipated use of a toxic substance listed on Schedule 1 or 2 in a laboratory for analysis, in scientific research or as a laboratory analytical standard. This report must be submitted as per section 3 of the Regulations.

This form is being offered as an online service and is available in Portable Document Format (PDF) only, as a signature is required. Once you have accessed the form, you must print the form and fill in the fields by hand for submission by mail, or you may scan the completed and signed form and submit it by email.

Chemicals Management Division
Environmental Protection Branch
Environment and Climate Change Canada
351 St. Joseph Boulevard, 10th Floor
Gatineau, QC K1A 0H3
Email: ec.interdiction-prohibition.ec@canada.ca

For the PDF version, you must have a PDF reader on your computer. If you do not, see our Help on accessing documents in PDF format page.

For further information, please refer to the contact information above.

Schedule 4: Information Required in an Application for a Permit or an Application for Renewal of a Permit

This form is used to request a permit to manufacture or import certain toxic substances. If at the time of coming into force of the regulations, you are carrying out any of these activities for certain toxic substances, you must apply for a permit to continue the activity. If issued, the permit expires 12 months after the day it was issued and may only be extended twice, upon application, for the same use of the toxic substance. The Minister must refuse a permit if there are reasonable grounds to believe that the applicant has provided false or misleading information, and if information required under the Prohibition of Certain Toxic Substances Regulations, 2012 has not been provided or is insufficient. For more detail, refer to sections 9, 10 and 11 of the Regulations.

This form is being offered as an online service and is available in Portable Document Format (PDF) only, as a signature is required. Once you have accessed the form, you must print the form and fill in the fields by hand for submission by mail, or you may scan the completed and signed form and submit it by email.

Chemicals Management Division
Environmental Protection Branch
Environment and Climate Change Canada
351 St. Joseph Boulevard, 10th Floor
Gatineau, QC K1A 0H3
Email: ec.interdiction-prohibition.ec@canada.ca

For the PDF version, you must have a PDF reader on your computer. If you do not, see our Help on accessing documents in PDF format page.

For further information, please refer to the contact information above.

Schedule 5: Information Relating to the Manufacture or Import of Toxic Substances or the Import of a Product Containing It

This form is used to report the manufacture or import of toxic substances or a product containing it, listed on Part 4 of Schedule 2, if they meet the reporting requirements identified in section 12 of the Prohibition of Certain Toxic Substances Regulations, 2012.

This form is being offered as an online service and is available in Portable Document Format (PDF) only, as a signature is required. Once you have accessed the form, you must print the form and fill in the fields by hand for submission by mail, or you may scan the completed and signed form and submit it by email.

Chemicals Management Division
Environmental Protection Branch
Environment and Climate Change Canada
351 St. Joseph Boulevard, 10th Floor
Gatineau, QC K1A 0H3
Email: ec.interdiction-prohibition.ec@canada.ca

For the PDF version, you must have a PDF reader on your computer. If you do not, see our Help on accessing documents in PDF format page.

For further information, please refer to the contact information above.

Report a problem or mistake on this page
Please select all that apply:

Thank you for your help!

You will not receive a reply. For enquiries, contact us.

Date modified: