Domestic Supply Consultations
The Government of Canada is seeking input from Canadian producers and industry associations regarding their ability to produce a range of products that were subject to tariffs when imported .
Input to these consultations will be used to validate whether these products are made in Canada. If they are not made in Canada, the importers of these goods may be eligible for tariff relief.
Background
On March 4, 2025, the Government of Canada outlined a process and framework for how it will consider requests for tariff remission (i.e., tariff relief) on products imported from the U.S.
Remission of tariffs on U.S. imports are considered in the following instances:
- To address situations where goods used as inputs cannot be sourced domestically, either on a national or regional basis, or reasonably from non-U.S. sources.
- To address, on a case-by-case basis, other exceptional circumstances that could have severe adverse impacts on the Canadian economy.
A similar remission framework is also in place for tariffs on steel and aluminum imports from China, steel tariff-rate quotas (TRQs) and steel derivative surtaxes.
A key consideration in the government’s assessment of remission requests under these frameworks is whether the imported product can reasonably be sourced domestically.
Purpose of this Consultation
The Department of Finance Canada is consulting with Canadian producers to determine whether the products listed below can be sourced domestically.
If your company can produce any of the products listed in the table below, please indicate this by completing the web form.
If a Canadian supplier is identified, the company requesting tariff relief will be directed to contact that supplier in order to assess that their purchasing needs can be met (i.e., quantities, specifications, timelines).
This consultation is open until March 15, 2026 at 11:59pm PDT.
Additional supporting materials or questions can be sent to: remissions-remises@fin.gc.ca.
For ease of reference, the following categories of goods are covered by this consultation:
- Aluminum
- Steel
- Articles of Base Metal
- Packaging
- Forestry products
- Tools
- HVAC (Heating, Ventilation, and Air Conditioning)
List of Products for Consultation
Below is a detailed list of the products subject to consultation, including their HS code and physical description.
New:
For some products, the appropriate HS code remains to be determined (TBD). In those instances, two potential HS codes have been included for consideration. However, only the most appropriate HS code would be included in the Order for remission, if approved.
| Product Code | HS Code | Category | Product Description (As described by the requestor, in the language in which it was received) |
|---|---|---|---|
| 001 | 3926.90.10.00 | Packaging | Hybrid paint cans, consisting of a cylindrical body of medium-density polypropylene and a ring of tin plate, of a nominal capacity of 1.00 gallon, manufactured to ASTM D450, ASTM D5118, and ASTM D5276 and UN1263, of a wall thickness of at least 0.0094 inches but not exceeding 0.0097 inches, with an outer diameter of 6.594 inches, with a height of 7.750 inches, with a tin exterior ring finish and with an enamel-coated ring interior, of a friction-type closure, with an ear included and without a handle. |
| 002 | 4407.19.00.81 | Forestry | Wood sawn or chipped lengthwise, of Douglas fir, dressed, in standard lifts, with a thickness of at least 2 inches but not exceeding 14 inches, with a width of at least 4 inches but not exceeding 24 inches, rough fullsawn. |
| 003 | 7208.27.00 | Steel | Flat-rolled products of carbon steel, hot-rolled and pickled, in coils, of grade HSLA500, HSLA550, HSLA590, or FB580, with a thickness not exceeding 3.0 mm, with a width of at least 600 mm, uncoated |
| 004 | 7208.27.00 | Steel | Flat-rolled products of carbon steel, hot-rolled and pickled, in coils, of specifications JIS G3134 SPFH 590 Modified, M2021-SP251-590 or HSLA S500MC EN 10149-2, with a thickness not exceeding 3.0 mm, with a width exceeding 890 mm, uncoated |
| 005 | 7208.38.00 | Steel | Steel coils, of carbon, hot-rolled, of grade 4130 or 8620, of specification SAE J404, ASTM A829 or ASTM A514, of a thickness of 3 mm or more but less than 4.75 mm, with a width of 600 mm or more. |
| 006 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP231-440P, with a thickness of 1.6 mm, with a width of 355 mm |
| 007 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP791-440, with a thickness of 2.3 mm, with a width of 726.4 mm |
| 008 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP791-440, with a thickness of 2.6 mm, with a width of 538 mm |
| 009 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP791, with a thickness of 2.3 mm, with a width of 452 mm |
| 010 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP791, with a thickness of 2.0 mm, with a width of 351 mm |
| 011 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP791-440, with a thickness of 2.6 mm, with a width of 538 mm |
| 012 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP221P, with a thickness of 2.9 mm, with a width of 840 mm |
| 013 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP791-440, with a thickness of 2.6 mm, with a width of 538 mm |
| 014 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP791-440, with a thickness of 2.0 mm, with a width of 286 mm |
| 015 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP791-440, with a thickness of 2.3 mm, with a width of 726.4 mm |
| 016 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP783-590B, with a thickness of 2.0 mm, with a width of 348 mm |
| 017 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP221P, with a thickness of 2.9 mm, with a width of 840 mm |
| 018 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP791, with a thickness of 2.0 mm, with a width of 247 mm |
| 019 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP231-440P, with a thickness of 1.8 mm, with a width of 272 mm |
| 020 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP221P, with a thickness of 2.9 mm, with a width of 840 mm |
| 021 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP221P, with a thickness of 2.9 mm, with a width of 462 mm |
| 022 | 7208.39.00.00 | Steel | Flat-rolled products of iron or non-alloy steel, hot-rolled, in coils, of grade SP231-440P, with a thickness of 1.6 mm, with a width of 355 mm |
| 023 | 7208.51.00 | Steel | Steel plates and sheets, of carbon steel, hot-rolled, of grade 4130 or 8620, of specification SAE J404, ASTM A829 or ASTM A514, with a thickness exceeding 10 mm, with a width of 600 mm or more. |
| 024 | 7208.51.00 | Steel | Flat-rolled products, in steel plates, of non-alloy steel, hot rolled, of grade SA414-G, SA516-70, CSA 44W/A36 or CSA 50W/A36, with a width of 600 mm or more, of a thickness of 10 mm or more, pickled. |
| 025 | 7208.51.00 | Steel | Hot-rolled flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not clad, plated or coated, of a thickness exceeding 10 mm |
| 026 | 7208.52.00 | Steel | Steel plates and sheets, of carbon steel, hot-rolled, 4130 or 8620, of specification SAE J404, ASTM A829 or ASTM A514, with a thickness of 4.75 mm or more but not exceeding 10 mm, with a width of 600 mm or more |
| 027 | 7208.52.00 | Steel | Flat-rolled products, in steel plates, of non-alloy steel, hot rolled, of grade SA414-G, SA516-70, CSA 44W/A36 or CSA 50W/A36, of a width of 600 mm or more, of a thickness of 4.75 mm or more but not exceeding 10 mm, pickled. |
| 028 | 7208.52.00 | Steel | Hot-rolled flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not in coils, not clad, plated or coated, of a thickness of 4.75 mm or more but not exceeding 10 mm |
| 029 | 7208.53.00 | Steel | Flat-rolled products, in steel plates, of non-alloy steel, hot rolled, of grade SA414-G, SA516-70, CSA 44W/A36 or CSA 50W/A36, with a width of 600 mm or more, of a thickness of 3 mm but not exceeding 4.75 mm, pickled. |
| 030 | 7208.53.00.00 | Steel | Steel hot rolled coil, pre-processed into plate for laser cutting, of thickness of at least 0.06 inches but not exceeding 0.250 inches; plate width of at least 48 inches but not exceeding 60 inches, plate length of at least 96 inches but not exceeding 120 inches, material grade CSA 44W & ASTM A36 |
| 031 | 7208.54.00 | Steel | Flat-rolled products, in steel plates, of non-alloy steel, hot-rolled, of grade SA414-G, SA516-70, CSA 44W/A36 or CSA 50W/A35, with a width of 600 mm or more, with a thickness of less than 3 mm, pickled. |
| 032 | 7209.16.00 | Steel | Flat-rolled products of carbon steel, cold-rolled and annealed, in coils, of grades BH180, BH210, BH240, BH270, HSLA500, HSLA550, DP490, DP590, DP780, DP980, MP980, MP1180,TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, with a thickness exceeding 1.0 mm but not exceeding 3.0 mm, with a width of at least 600 mm, uncoated |
| 033 | 7209.16.00 | Steel | Flat-rolled products of carbon steel, cold-rolled and annealed, in coils, of specification SAE J2340 340XF, with a nominal thickness of 1.4 mm, with a width exceeding 1550 mm, uncoated |
| 034 | 7209.17.00 | Steel | Flat-rolled products of carbon steel, cold-rolled and annealed, in coils, of grades BH180, BH210, BH240, BH270, HSLA500, HSLA550, DP490, DP590, DP780, DP980, MP980, MP1180,TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, with a thickness of at least 0.5 mm but not exceeding 1.0 mm, with a width of at least 600 mm, uncoated |
| 035 | 7209.26.00 | Steel | Flat-rolled products, in steel plates, of non-alloy steel, cold-rolled, of grade SA414-G, SA516-70, CSA 44W/A36 or CSA 50W/A35, with a thickness exceeding 1 mm but less than 3 mm, pickled. |
| 036 | 7210.11.00.00 | Steel | Plates, explosion-bonded, clad with stainless steel 304L metallurgically bonded to carbon steel substrate, of a width of 75 inches in diameter, with thickness of 0.875 inch, corrosion-resistant cladding surface. |
| 037 | 7210.12.00 | Steel | Carbon steel coils, of grade TP CL TP-T1 Bright .25 VD Type D, of a thickness of at least 0.0118 inch, with a width of at least 30 inches, plated with tin |
| 038 | 7210.30.00 | Steel | Flat-rolled products of carbon steel, cold-rolled, in coils or cut lengths, of grades CQ/CS (CR1), DS/DQ/DQAK (CR2/CR3), DDS/DDQ (CR4), EDDS/EDDQ (CR5), S-EDDS/S-EDDQ (CR6), BH180, BH210, BH240, BH270, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, with a thickness not exceeding 3 mm, with a width of at least 600 mm, electrolytically zinc coated |
| 039 | 7210.49.00 | Steel | Flat-rolled products of carbon steel, hot-dip galvanized, in coils or cut lengths, of grades 980T/700Y-DP, 980T/700Y-MP, 980T/700Y-TRIP, or TRIP1180, with a thickness of at least 0.5 mm, with a width of at least 600 mm, with a zinc coating |
| 040 | 7210.49.00 | Steel | Flat-rolled products of carbon steel, hot-dip galvanized, in coils or cut lengths, of specification FCA 50002-LAC550Y620T G-40 with a thickness of at least 0.5 mm, with a width of at least 600 mm, with a zinc coating |
| 041 | 7210.49.00 | Steel | Flat-rolled products of carbon steel, hot-dip galvanized, in coils or cut lengths, of grades BH180, BH210, BH240, BH270, HSLA240, HSLA300, HSLA340, HSLA380, HSLA420, HSLA500, HSLA550, HSLA590, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, with a thickness of at least 0.5 mm, with a width exceeding 1702 mm, with a zinc coating |
| 042 | 7210.49.00 | Steel | Flat-rolled products of carbon steel, hot-dip galvanized, in coils or cut lengths, of specification GMW3032M-ST-420LA-HDG60G/60G-U, SAE J2340380X 60G60G, SAE J2340 420X 60G60G, or GMW3032-ST-S-340LA-HDG60G/60G-U with a thickness of at least 0.5 mm not exceeding 2.5 mm, with a width exceeding 1524 mm, with a zinc coating |
| 043 | 7210.49.00 | Steel | Flat-rolled products of carbon steel, hot-dip galvanized, in coils or cut lengths, of specification SAE J2340 550XF with a thickness of at least 0.5 mm not exceeding 2 mm, with a width exceeding 1270 mm, with a zinc coating |
| 044 | 7210.49.00 | Steel | Flat-rolled products of carbon steel, hot-dip galvanized, in coils or cut lengths, of specification SAE J2340 550XF with a nominal thickness of 3 mm, with a width exceeding 940 mm, with a zinc coating |
| 045 | 7210.49.00.00 | Steel | Steel galvanized coil, pre-processed into plate for laser cutting, of thickness of at least 0.075 inches (14 gauge) but not exceeding 0.135 inches (10 gauge), plate width of at least 48 inches but not exceeding 60 inches, plate length of at least 76 inches but not exceeding 120 inches, material grade ASTM A36 with galvanized coating grade G90 |
| 046 | 7210.49.00.70 | Steel | Flat-rolled products of iron or non-alloy steel, hot-dip galvanized, in coils, of grade LAC420Y480T G190/90, of specification MS 52002, with a thickness of at least 1.676 mm but not exceeding 1.803 mm, with a width of 34.37 inches, and with an HDG 90G90G |
| 047 | 7210.49.00.70 | Steel | Flat-rolled products of iron or non-alloy steel, hot-dip galvanized, in coils, of grade LAC420Y480T G190/90, of specification MS 52002, with a thickness of at least 1.626 mm but not exceeding 1.778 mm, with a width of 57.283 inches, and with an HDG 90G90G coating |
| 048 | 7210.49.00.70 | Steel | Flat-rolled products of iron or non-alloy steel, hot-dip galvanized, in coils, of grade LAC420Y480T G190/90, of specification MS 52002, with a thickness of at least 2.616 mm but not exceeding 2.819 mm, with a width of 33.071 inches, and with an HDG 90G90G coating |
| 049 | 7210.49.00.70 | Steel | Flat-rolled products of iron or non-alloy steel, hot-dip galvanized, in coils, of grade FBH440Y580T GI90/90 U, of specification MS 50002, with a thickness of at least 2.515 mm but not exceeding 2.642 mm, with a width of 23.74 inches, and with an HDG90G90G coating |
| 050 | 7210.49.00.70 | Steel | Flat-rolled products of iron or non-alloy steel, hot-dip galvanized, in coils, of grade FBH440Y580T GI90/90 U, of specification MS 50002, with a thickness of at least 2.159 mm but not exceeding 2.413 mm, with a width of 27.165 inches, and with a zinc coating |
| 051 | 7210.61.00 | Steel | Aluminized carbon steel coils, sheets, and plates, of grade ASTM A463 CS Type B or ASTM A463 EDDS, with a width of at least 600 mm, plated or coated with aluminum-zinc alloys |
| 052 | 7210.69.00 | Steel | Aluminized carbon steel coils, sheets, and plates, of grade ASTM A463 CS Type B or ASTM A463 EDDS, with a width of at least 600 mm, plated or coated with aluminum |
| 053 | 7210.69.00 | Steel | Flat-rolled products of carbon steel, hot dip aluminized, in coils or cut lengths, of grades EDDS T-140 or FS Type B T-140, with thickness of at least 0.5 mm, with a width of at least 600 mm, with an aluminum-based coating |
| 054 | 7210.90.00 | Steel | Steel plate, explosion-bonded clad, of carbon steel, of specification ASME SA516 Grade 70 for the carbon steel base and of grade Alloy 600 for the nickel alloy cladding, with a carbon steel thickness of 0.625 inches and a cladding thickness of 0.1875 inches |
| 055 | 7210.90.00 | Steel | Steel plate, explosion-bonded clad, of carbon steel, of specification ASME SA516 Grade 70 for the carbon steel base and of grade Alloy 600 for the alloy cladding, with a carbon steel thickness of 1.25 inches and a cladding thickness of 0.1875 inch |
| 056 | 7211.14.00 | Steel | Flat-rolled products, in steel plates, of non-alloy steel, hot-rolled, of grade SA414-G, SA516-70, CSA 44W/A36 or CSA 50W/A36, with a width of less than 600 mm, with a thickness of 4.75 mm or more. |
| 057 | 7211.19.00 | Steel | Flat-rolled products, in steel plates, of non-alloy steel, hot rolled, of grade SA414-G, SA516-70, CSA 44W/A36 or CSA 50W/A36, with a width of less than 600 mm. |
| 058 | 7211.23.00 00 | Steel | Carbon steel strip in coils, of grades UNS G10060, UNS G10080, or UNS G10100, cold-rolled and tempered, with a carbon content of less than 0.13 percent, with a thickness of at least .018 inches but not exceeding 0.130 inches, with a width of at least 0.118 inches but not exceeding 7.000 inches, slit or edge-conditioned, oiled, designed for use in the manufacture of tubular non-threaded steel fasteners. |
| 059 | 7211.29.00 | Steel | Flat-rolled products of carbon steel , cold-rolled and annealed, in coils or cut lengths, of grades BH180, BH210, BH240, BH270, HSLA500, HSLA550, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, with a thickness not exceeding 3.0 mm, with a width not exceeding 600 mm, uncoated |
| 060 | 7211.29.00.00 | Steel | Carbon steel strip in coils, of grades UNS G10700, UNS G10740, or UNS G10750, cold-rolled and tempered, with a carbon content of at least 0.65 percent but not exceeding 0.80 percent, with a thickness of at least .018 inches but not exceeding 0.130 inches, with a width of at least 0.118 inches but not exceeding 7.000 inches, slit or edge-conditioned, oiled. |
| 061 | 7212.20.00 | Steel | Flat-rolled products of carbon steel, in coils or cut lengths, of grades of grades CQ/CS (CR1), DS/DQ/DQAK (CR2/CR3), DDS/DDQ (CR4), EDDS/EDDQ (CR5), S-EDDS/S-EDDQ (CR6), BH180, BH210, BH240, BH270, DP490, DP590, DP780, DP980, MP980, MP1180,TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, of a thickness of at least 0.5 mm, with a width not exceeding 600 mm, electrolitically coated with zinc |
| 062 | 7212.30.00 | Steel | Flat-rolled products of carbon steel hot-dip galvanized, in coils or cut lengths, of grades 980T/700Y-DP, 980T/700Y-MP, 980T/700Y-TRIP, or TRIP1180, with a thickness of at least 0.5 mm, with a width not exceeding 600 mm, coated with zinc |
| 063 | 7212.30.00 | Steel | Flat-rolled products of carbon steel hot-dip galvanized, in coils or cut lengths, of of specification FCA 50002-LAC550Y620T G-40, with a thickness of at least 0.5 mm, with a width not exceeding 600 mm, coated with zinc |
| 064 | 7212.50.00 | Steel | Aluminized carbon steel coils, sheets, and plates, of grade ASTM A463 EDDS, with a width of less than 600 mm, plated or coated with aluminum |
| 065 | 7212.50.00 | Steel | Flat-rolled products of carbon steel, hot-dip aluminized, in coils or cut lengths, of grade EDDS T-140 or FS Type B T-140, with a thickness of at least 0.5 mm, with a width not exceeding 600 mm, with an aluminum-based coating |
| 066 | 7212.50.00.40 | Steel | Flat-rolled products of iron or non-alloy steel, in coils, of grade SACE 120, of specification EDDS T1-40, aluminized, with a thickness of at least 0.25 mm but not exceeding 0.5 mm, and with a width not exceeding 600 mm |
| 067 | 7212.50.00.50 | Steel | Flat-rolled products of iron or non-alloy steel, in coils, of grade SACE 120, of specification EDDS T1-40, aluminized, with a thickness of at least 0.5 mm but not exceeding 1 mm, and with a width not exceeding 600 mm |
| 068 | 7213.10.00.90 | Steel | Bars and rods, hot-rolled, of non-stainless steel, of grade 100, of specification ASTM A1035-CS, containing indentations, ribs, grooves or other deformations, with chromium content of at least 8.0% but not exceeding 10.0%, with maximum carbon content of 0.15%, of a diameter of at least 9.530 mm but not exceeding 57.350 mm, of a length not exceeding 18.288 mm. |
| 069 | 7214.20.00 | Steel | Carbon steel reinforcing bars in coils, of grade 400W, of specification CSA G30.18-21, containing indentations, ribs, grooves, or other deformations produced during the rolling process, with a nominal diameter of 11.3 mm (10M size), with a length of at least 10 meters but not exceeding 700 meters, uncoated |
| 070 | 7214.20.00 | Steel | Carbon steel reinforcing bars in coils, of grade 400W, of specification CSA G30.18-21, containing indentations, ribs, grooves, or other deformations produced during the rolling process or twisted after rolling, with nominal diameters of 16.0mm (15M size), 19.5mm (20M), or 19.05 mm (#6 size), with a length of at least 10 meters but not exceeding 700 meters, uncoated |
| 071 | 7214.20.00.90 | Steel | Bars and rods, hot-rolled, of non-stainless steel, of grade 100, of specification ASTM A1035-CS, containing indentations, ribs, grooves or other deformations, with chromium content of at least 8.0% but not exceeding 10.0%, with maximum carbon content of 0.15%, of a diameter of at least 9.530 mm but not exceeding 57.350 mm, of a length not exceeding 18.288 mm. |
| 072 | 7214.99.00 | Steel | Other bars and rods, of carbon steel, of grade AISI/SAE 1018, of specification ASTM A29 and ASTM A576, hot rolled, with an outer diameter of at least 4.125 inches but not exceeding 5.98 inches |
| 073 | 7214.99.00 | Steel | Other bars and rods, of carbon steel, of grade AISI/SAE 1045, of specification ASTM A29 and ASTM A576, hot rolled, with an outer diameter of at least 152.40 mm but not exceeding 355.60 mm |
| 074 | 7214.99.00.42 | Steel | Bars, of carbon steel, of grade AISI/SAE 1018, of specification ASTM A29 and ASTM A576, hot rolled, with an outer diameter of at least 6.00 inches but not exceeding 13.50 inches |
| 075 | 7214.99.00.42 | Steel | Other bars and rods, of carbon steel, of grade AISI/SAE 1045, of specification ASTM A29 and ASTM A576, produced as special bar quality, hot rolled, with an outer diameter of at least 4.125 inches but not exceeding 5.98 inches |
| 076 | 7215.10.00.20 | Steel | Other bars and rods, of free-cutting steel, not further worked than cold-formed or cold-finished of grades AISI 1215/1144 of specification ASTM A108 or ASTM A311, with an outer diameter exceeding 4.50 inches, cold finished |
| 077 | 7215.50.00.10 | Steel | Other bars and rods, of carbon steel, flat, of grades AISI 1018/1045, of specification ASTM A108, of a rectangular cross section with a thickness exceeding 2.00 inches, cold finished |
| 078 | 7215.50.00.21 | Steel | Other bars and rods, of carbon steel, of grades AISI 1144/1045, of specification ASTM A108, with an outer diameter exceeding 4.50 inches, cold finished as turned, ground, and polished |
| 079 | 7215.50.00.29 | Steel | Other bars and rods, of carbon steel, of grades AISI 1018/1045//1117/1141, of specification ASTM A108 , with an outer diameter exceeding 4.50 inches, cold finished |
| 080 | 7215.50.00.29 | Steel | Other bars and rods, of carbon steel, of grades AISI 1018/1045//1117/1141, of specification ASTM A108 , with an outer diameter exceeding 4.50 inches, cold finished |
| 081 | 7215.50.00.90 | Steel | Other bars and rods, of carbon steel, of grade AISI 1018, of specification ASTM A108, with a square cross section of a dimension exceeding 2.00 inches, cold finished |
| 082 | 7215.50.00.90 | Steel | Other bars and rods, of carbon steel, of grade AISI 1018, of specification ASTM A108, with a square cross section of a dimension exceeding 2.00 inches, cold finished |
| 083 | 7216.31.00.21 | Steel | MC Channel U-section structural channels, of non-alloy steel, of grade 50, of specification ASTM A572 and CSA G40.21 345W, hot-rolled, with a height of 304.8 mm, and with a length of 15240 mm, without specified surface coating with Height: 12 inches Length: 50 feet |
| 084 | 7216.40.00.11 | Steel | L-section structural angles, of non-alloy steel, of grade 50, of specification ASTM A572, hot-rolled, with an equal-leg configuration, with a leg length of 152.4 mm, and with a thickness of 12.7 mm |
| 085 | 7216.40.00.12 | Steel | L-section structural angles, of non-alloy steel, of grade 50, of specification ASTM A572, hot-rolled, with an equal-leg configuration, with a leg length of 203.2 mm, and with a thickness of 15.875 mm |
| 086 | 7216.40.00.12 | Steel | L-section structural angles, of non-alloy steel, of grade 50, of specification ASTM A572, hot-rolled, with an equal-leg configuration, with a major leg height of 8 inches but not exceeding 203.2 mm, width of 8 inches and with a thickness of 0.500 inches but not exceeding 15.875 mm |
| 087 | 7216.40.00.22 | Steel | L-section structural steel angles, of non-alloy steel, of grade 50, of specification ASTM A572, hot-rolled, with an unequal-leg configuration, with a larger leg length of 203.2 mm, with a smaller leg length of 152.4 mm, and with a thickness of 12.7 mm |
| 088 | 7216.40.00.22 | Steel | L-section structural angles, of non-alloy steel, of grade 50, of specification ASTM A572, hot-rolled, with an unequal-leg configuration, with a height of 8 inches, with a width of 6 inches, and with a thickness of 0.5 inches |
| 089 | 7216.40.00.22 | Steel | L-section structural angles, of non-alloy steel, of grade 50, of specification ASTM A572, hot-rolled, with an unequal-leg configuration, with a major leg length and with dimensions of height 8 iches, width 6 inches and thickness 0.500 inches. |
| 090 | 7217.10.00 | Steel | Carbon steel wire, flat or shaped, in coils or spools, of grades UNS G10700, UNS G10740, or UNS G10750, cold-drawn and precision-rolled and annealed, with a carbon content of at least 0.65 percent but not exceeding 0.80 percent, with a thickness of at least .018 inches but not exceeding 0.130 inches, with a width of at least 0.118 inches but not exceeding 0.600 inches, with a coil diameter of at least 20 inches but not exceeding 60 inches. |
| 091 | 7217.10.00 | Steel | Carbon steel wire, flat or shaped, in coils or spools, of grades UNS G10060, UNS G10080, or UNS G10100, cold-drawn and precision-rolled and annealed, with a carbon content of less than 0.13 percent, with a thickness of at least 0.018 inches but not exceeding 0.130 inches, with a width of at least 0.118 inches but not exceeding 0.600 inches, with coils in diameters of at least 20 inches but not exceeding 60 inches, oiled. |
| 092 | 7217.10.00.42 | Steel | Dark-annealed non-alloy steel wire, not plated or coated, of a diameter of less than 1 mm (Nos. 23 and 24), supplied on 1/2-lb spools. |
| 093 | 7217.20.00.99 | Steel | Carbon steel wire, of grades SWCH10 or SAE 1010, with a wire diameter of 1.000 inch or 1.078 inches, zinc-coated |
| 094 | 7217.90.00 | Steel | Plastic-coated non-alloy steel wire, consisting of two parallel non-alloy steel wires enclosed in a polyethylene coating, in rolls of approximately 2,400 metres, for use as a nose-bridge insert in disposable surgical masks to enable the mask to be shaped and sealed to the wearer’s nose and face. |
| 095 | 7219.11.00 | Steel | Flat-rolled products, of stainless steel, in coils, hot-rolled, of grades 420, 440, 17-4, and 15-5, with a width of 600mm or more |
| 096 | 7219.14.00 | Steel | Stainless steel flat-rolled coils, cold-rolled, of grade 304, of specification ASTM A240/A240M, with a thickness of at least 0.0295 inch but not exceeding 0.0335 inch, with a width of 26.4173 inches |
| 097 | 7219.21.00 | Steel | Hot-rolled stainless steel sheets and plates, of grades 201, 304, 304L, 316, or 316L, of specification ASTM A240/A480, of a thickness exceeding 10 mm, and with a width of at least 600 mm |
| 098 | 7219.22.00 | Steel | Hot-rolled stainless steel sheets and plates, of grades 201, 304, 304L, 316, or 316L, of specification ASTM A240/A480, of a thickness of at least 4.75 mm but not exceeding 10 mm, and with a width of at least 600 mm |
| 099 | 7219.23.00 | Steel | Hot-rolled stainless steel sheets and plates, of grades 201, 304, 304L, 316, or 316L, of specification ASTM A240/A480, of a thickness of at least 3 mm but less than 4.75 mm, and with a width of at least 600 mm |
| 100 | 7219.24.00 | Steel | Hot-rolled stainless steel sheets and plates, of grades 201, 304, 304L, 316, or 316L, of specification ASTM A240/A480, of a thickness of less than 3 mm, and with a width of at least 600 mm |
| 101 | 7219.90.00 | Steel | Stainless steel coils, sheets, and plates, of grades 201, 304, 304L, 316, or 316L, of specification ASTM A240/A480, with a width of at least 600 mm, with number 4 polished finish |
| 102 | 7220.11.00.00 | Steel | Flat-rolled products of stainless steel, of a width of less than 600mm. Not further worked than hot-rolled, in coils. Of a thickness of 4.75mm or more; Grade 41003. |
| 103 | 7220.12.00.00 | Steel | Flat-rolled products of stainless steel, of a width of less than 600mm. Hot-rolled in coils, annealed and pickled. Of a thickness of less than 4.75mm; Grade 41003. |
| 104 | 7220.20.00 | Steel | Flat-rolled products of stainless steel, of a width of less than 600mm. In coils. Not further worked than cold-rolled, in coils. Grades UNS41003, SUS436, Aluminized type 409 coated with an aluminum-silicon alloy. |
| 105 | 7220.20.00.10 | Steel | Stainless steel strip in coils, of grades UNS S30200, UNS S30400, or UNS S30403, cold-rolled and tempered, with a carbon content of less than 0.15 percent, with a thickness of at least 0.018 inches but not exceeding 0.130 inches, with a width of at least 0.118 inches but not exceeding 7.000 inches, slit or edge-conditioned, designed for use in the manufacture of tubular non-threaded stainless steel fasteners. |
| 106 | 7220.90.00 | Steel | Stainless steel plate, of an alloy 13-8PH, of specification AMS 5629 H1000, with a thickness of 2.750 inches, with a width of 18.000 inches, and with a length of 41.000 inches. |
| 107 | 7220.90.00 | Steel | Stainless steel plate, of an alloy 13-8PH, of specification AMS 5629 H1000, with a thickness of 3.250 inches, with a width of 18.000 inches, and with a length of 42.500 inches. |
| 108 | 7220.90.00 | Steel | Stainless steel plate, of an alloy 13-8PH, of specification AMS 5934 H1000, with a thickness of 2.750 inches, with a width of 4.500 inches, and with a length of 9.750 inches. |
| 109 | 7220.90.00 | Steel | Stainless steel plate, of an alloy 13-8PH, of specification AMS 5934 H1000, with a thickness of 2.750 inches, with a width of 4.500 inches, and with a length of 8.750 inches. |
| 110 | 7221.00.00.60 | Steel | Wire-rod of stainless steel, in coils, of grades AISI 316, hot-rolled, with a diameter of 0.2180 inches. |
| 111 | 7222.20.00 | Steel | Stainless steel plate, of an alloy 15-5PH, of specification AMS 5659 Type 1, heat treated in accordance with BAC 5619 to 180-200 KSI, with a thickness of 1.250 inches, with a width of 7.000 inches, and with a length of 12.250 inches. |
| 112 | 7223.00.00 | Steel | Stainless steel wire, flat or shaped, in coils or spools, of grades UNS S30200, UNS S30400, or UNS S30403, cold-drawn and precision-rolled and annealed, with a carbon content of less than 0.15 percent, with a thickness of at least 0.018 inches but not exceeding 0.130 inches, with a width of at least 0.118 inches but not exceeding 0.600 inches, with a diameter of at least 20 inches but not exceeding 60 inches. |
| 113 | 7223.00.00.90 | Steel | Stainless steel wire of grade 304L, of wedge and house shaped cross-sections with a base width of 2.286 mm and heights ranging from at least 2.667 mm but not exceeding 3.556 mm, with a tolerance of 0 to 0.015 mm, a hardness of at least 26 HRC but not exceeding 34 HRC, supplied on spools containing at least 900 kg, and with a surface finish free of scratches and burrs. |
| 114 | 7225.11.00 | Steel | Grain-oriented silicon electrical steel (GOES), flat-rolled product of other alloy steel, in coils, of a width of 600 mm or more, with an insulation coating, for use in the fabrication of transformer-core laminations. |
| 115 | 7225.30.00 | Steel | Steel coils, of alloy steel, hot-rolled, of grade 4130 or 8620, of specification SAE J404, ASTM A829 or ASTM A514, with a width of 600 mm or more. |
| 116 | 7225.30.00 | Steel | Flat-rolled products of other alloy steel, hot-rolled and pickled, in coils, of grade HSLA500, HSLA550, HSLA590, or FB580,with a thickness not exceeding 3.0 mm, with a width of at least 600 mm, uncoated |
| 117 | 7225.30.00 | Steel | Flat-rolled products of other alloy steel, hot-rolled and pickled, in coils, of specification JIS G3134 SPFH 590 Modified, M2021-SP251-590 orHSLA S500MC EN 10149-2, with a thickness not exceeding 3.0 mm, with exceeding 890 mm, uncoated |
| 118 | 7225.40.00 | Steel | Steel sheets and plates, of alloy steel, hot-rolled, of grade 4130 or 8620, of specifications SAE J404, ASTM A829 or ASTM A514with a width of 600 mm or more. |
| 119 | 7225.40.00 | Steel | Flat-rolled products of other alloy steel, other, in plates, of low-alloy weathering steel, conforming to CAN/CSA G40.21 Grade 50AT Category 3 and ASTM A709 Grade 50W Category 3, of a thickness of at least 0.375 inches but not exceeding 3.00 inches, with a width ranging from 82 to 134 inches, uncoated. |
| 120 | 7225.50.00 | Steel | Cold-rolled high-strength low-alloy steel coils, of grade 380XF, of specification SAE J2340, of a thickness of at least 0.045 inches but not exceeding 0.050 inches, with a width of 28.1496 inches, with smooth cold-rolled finish |
| 121 | 7225.50.00 | Steel | Flat-rolled alloy steel plate, cold-rolled, of silicon-electrical steel, of grade 4140, 6150, or 4340, with a width of at least 600.0 mm and a thickness ranging from 7.0 mm to 101.6 mm, spheroidized for machinability. |
| 122 | 7225.50.00 | Steel | Flat-rolled products of other alloy steel, cold-rolled and annealed, in coils or cut lengths, of grades BH180, BH210, BH240, BH270, HSLA500, HSLA550, DP490, DP590, DP780, DP980, MP980, MP1180,TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, with a thickness of at least 0.5 mm, with a width of at least 600 mm, uncoated |
| 123 | 7225.50.00 | Steel | Flat-rolled products of other alloy steel, cold-rolled and annealed, in coils, of specification SAE J2340 340XF, with a nominal thickness of 1.4 mm, with a width exceeding 1550 mm, uncoated |
| 124 | 7225.91.00 | Steel | Flat-rolled products of other alloy steel, in coils or cut lengths, of grades CQ/CS (CR1), DS/DQ/DQAK (CR2/CR3), DDS/DDQ (CR4), EDDS/EDDQ (CR5), S-EDDS/S-EDDQ (CR6), BH180, BH210, BH240, BH270, DP490, DP590, DP780, DP980, MP980, MP1180,TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, with a thickness of at least 0.5 mm, with a width of at least 600 mm, electrolytically coated with zinc |
| 125 | 7225.92.00 | Steel | Flat-rolled products of other alloy steel, hot-dip galvanized, in coils or cut lengths, of grades 980T/700Y-DP, 980T/700Y-MP, 980T/700Y-TRIP, or TRIP1180, with a thickness of at least 0.5 mm, with a width of at least 600 mm, with a zinc coating |
| 126 | 7225.92.00 | Steel | Flat-rolled products of other alloy steel, hot-dip galvanized, in coils or cut lengths, of specification FCA 50002-LAC550Y620T G-40 with a thickness of at least 0.5 mm, with a width of at least 600 mm, with a zinc coating |
| 127 | 7225.92.00 | Steel | Flat-rolled products of other alloy steel, hot-dip galvanized, in coils or cut lengths, of grades BH180, BH210, BH240, BH270, HSLA240, HSLA300, HSLA340, HSLA380, HSLA420, HSLA500, HSLA550, HSLA590, DP490, DP590, DP780, DP980, MP980, MP1180,TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, with a thickness of at least 0.5 mm, with a width exceeding 1702 mm, with a zinc coating |
| 128 | 7225.92.00 | Steel | Flat-rolled products of other alloy steel, hot-dip galvanized, in coils or cut lengths, of specification GMW3032M-ST-420LA-HDG60G/60G-U, SAE J2340380X 60G60G, SAE J2340 420X 60G60G, or GMW3032-ST-S-340LA-HDG60G/60G-U with a thickness of at least 0.5 mm not exceeding 2.5 mm, with a width exceeding 1524 mm, with a zinc coating |
| 129 | 7225.92.00 | Steel | Flat-rolled products of other alloy steel, hot-dip galvanized, in coils or cut lengths, of specification SAE J2340 550XF with a thickness of at least 0.5 mm not exceeding 2 mm, with a width exceeding 1270 mm, with a zinc coating |
| 130 | 7225.92.00 | Steel | Flat-rolled products of other alloy steel, hot-dip galvanized, in coils or cut lengths, of specification SAE J2340 550XF with a nominal thickness of 3 mm, with a width exceeding 940 mm, with a zinc coating |
| 131 | 7225.92.00.40 | Steel | Flat-rolled products of carbon steel, hot-rolled, in coils, of grade HR550-610LA, of specification S-GI60/60-U, with a thickness of 1.8 mm or 2.3 mm, with a width of 1,067 mm, 1,071 mm, 1,192 mm, 1,204 mm, 1,337 mm, 1,431 mm, or 1,158 mm, and with a zinc coating |
| 132 | 7225.99.00 | Steel | Aluminized steel coils, sheets, and plates, of grade ASTM A463 CS Type B or ASTM A463 EDDS, with a width of at least 600 mm, plated or coated with aluminum or aluminum alloys |
| 133 | 7225.99.00 | Steel | Aluminized steel coils, sheets, and plates, of grade ASTM A463 CS Type B or ASTM A463 EDDS, with a width of less than 600 mm, plated or coated with aluminum or aluminum alloys |
| 134 | 7225.99.00 | Steel | Flat-rolled products of other alloy steel, hot-dip aluminized, in coils or cut lengths, of grade EDDS T-140 or FS Type B T-140, with a thickness of at least 0.5 mm with a width of at least 600 mm, with an aluminum-based coating |
| 135 | 7226.11.00 | Steel | Grain-oriented silicon electrical steel (GOES), flat-rolled product of other alloy steel, in slit coils/strip, of a width of less than 600 mm, with an insulation coating, for use in the fabrication of transformer-core laminations. |
| 136 | 7226.11.00 | Steel | Flat-rolled products of silicon grain-oriented steel, in strip, with a width of less than 600 mm |
| 137 | 7226.19.00 | Steel | Flat-rolled products of silicon amorphous steel, in strip or ribbon, with a width of less than 600 mm |
| 138 | 7226.91.00 | Steel | Flat-rolled products, of steel plate, of other alloy steel, hot-rolled, of a grade SA414-G or SA516-70, with a width of less than 600 mm. |
| 139 | 7226.92.00 | Steel | Flat-rolled products of other alloy steel, cold-rolled and annealed, in coils or cut lengths, of grades BH180, BH210, BH240, BH270, HSLA500, HSLA550, DP490, DP590, DP780, DP980, MP980, MP1180,TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, with a thickness not exceeding 3.0 mm, with a width not exceeding 600 mm, uncoated |
| 140 | 7226.99.00 | Steel | Flat-rolled products of other alloy steel, in coils or cut lengths, of grades/CS (CR1), DS/DQ/DQAK (CR2/CR3), DDS/DDQ (CR4), EDDS/EDDQ (CR5), S-EDDS/S-EDDQ (CR6), BH180, BH210, BH240, BH270, DP490, DP590, DP780, DP980, MP980, MP1180,TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, of a width not exceeding 600 mm, of a thickness of at least 0.5 mm, electrolitically coated with zinc |
| 141 | 7226.99.00 | Steel | Flat-rolled products of carbon steel hot-dip galvanized, in coils or cut lengths, of grades 980T/700Y-DP, 980T/700Y-MP, 980T/700Y-TRIP, or TRIP1180, with a thickness of at least 0.5 mm, with a width not exceeding 600 mm, coated with zinc |
| 142 | 7226.99.00 | Steel | Flat-rolled products of carbon steel hot-dip galvanized, in coils or cut lengths, of specification FCA 50002-LAC550Y620T G-40, with a thickness of at least 0.5 mm, with a width not exceeding 600 mm, coated with zinc |
| 143 | 7226.99.00 | Steel | Flat-rolled products of carbon steel, hot-dip aluminized, in coils or cut lengths, of grade EDDS T-140 or FS Type B T-140, with a thickness of at least 0.5 mm, with a width not exceeding 600 mm, with an aluminum-based coating |
| 144 | 7227.90.00.81 | Steel | Alloy steel wire rod in coils, of grade 9254, hot-rolled, of circular cross-section, with a diameter of 13.9 mm |
| 145 | 7227.90.00.82 | Steel | Alloy steel wire rod in coils, of grade 9254, hot-rolled, of circular cross-section, with a diameter of at least 15.9 mm but not exceeding 17.9 mm |
| 146 | 7227.90.00.83 | Steel | Alloy steel wire rod in coils, of grade 9254, hot-rolled, of circular cross-section, with a diameter of 21.8 mm |
| 147 | 7228.30.00.71 | Steel | Other bars of steel, of alloy steel, hot rolled, quenched and tempered, of grade 4140/4142 ASTM F1554 Grade 105, of specification ASTM F1554 Grade 105, ASTM A193 Grade B7, ASME SA193 Grade B7, ASTM A29, ASTM A304, ASTM A434 Class BC, ASTM A370, ASTM E112, and ASTM E381, with a diameter of at least 15.875 mm but not exceeding 64 mm but not exceeding 30 feet. |
| 148 | 7228.30.00.71 | Steel | Other bars of steel, of alloy steel, hot rolled, quenched and tempered, of grade 4140/4142, of specification ASTM A193 Grade B7, ASME SA193 Grade B7, ASTM A29, ASTM A304, ASTM A434 Class BC, ASTM A370, ASTM E112 and ASTM E381,with a diameter of at least 15.875 mm but not exceeding 76 mm but not exceeding 30 feet. |
| 149 | 7228.30.00.71 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade AISI 4150 UNS G41500, of specification ASTM A434 Class BD, ASTM A29, ASTM A370, and ASTM E112, of a diameter of at least 15.875mm but not exceeding 76 mm but not exceeding 30 feet |
| 150 | 7228.30.00.71 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade 4140 Type L80, of specification ASTM A322, NACE MR0175, ASTM A370, ASTM E45, ASTM E112, API 6A PSL3 or ASTM A388, of a diameter of at least 38.1 mm but not exceeding 75.9 mm, of a length of at least 10 feet but not exceeding 30 feet |
| 151 | 7228.30.00.71 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade 4140/4142 Type 110, of specification ASTM A29, ASTM A434 Class BD, ASTM A370, ASTM E45, and ASTM E112, with a yield strength of at least 110 ksi, with a hardness of at least 285 HBW but not exceeding 341 HBW, of a diameter of at least 25.4 mm but not exceeding 76 mm but not exceeding 30 feet |
| 152 | 7228.30.00.71 | Steel | Other bars of other alloy steel, hot rolled, of grade 4340, of specification ASTM A434 Class BD and/or ASTM A29 and/or ASTM A370 and/or ASTM E112, with a diameter of at least 1.00 inches but not exceeding 76mm, with a yield strength of at least 130 ksi, with a hardness of at least 285 HBW but not exceeding 363 HBW |
| 153 | 7228.30.00.71 | Steel | Other bars of alloy steel, hot rolled, of grade 4130, of specification API 6A 21st Edition and/or API 6D Appendix F and/or API 16C and/or NACE MR0175 ISO 15156-2 and/or ASTM A29 and/or ASTM A322 and/or ASTM A370 and/or ASTM A388 and/or ASTM A255 and/or ASTM A304 and/or ASTM E10 and/or ASTM E18 and/or ASTM E23 and/or ASTM E112, with a yield strength of at least 75 ksi and with a hardness of at least 207 HBW but not exceeding 235 HBW, with a diameter of at least 1.25 inches but not exceeding 76mm. |
| 154 | 7228.30.00.71 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322 and ASTM A304, with an outer diameter not exceeding 76 mm, annealed |
| 155 | 7228.30.00.71 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grades AISI 4340/4340H, of specification ASTM A322 and ASTM A304, with a diameter not exceeding 76 mm, annealed and straightened |
| 156 | 7228.30.00.71 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grades AISI 8620/8620H, of specification ASTM A322 and ASTM A304, with a diameter not exceeding 76 mm, straightened in the as-rolled condition |
| 157 | 7228.30.00.71 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, aircraft quality, of grade AISI 4320/4320H, of specification ASTM A322, ASTM A304, ASTM A534, and AMS 2301, straightened in the as-rolled condition, with a diameter not exceeding 76 mm |
| 158 | 7228.30.00.71 | Steel | Other bars and rods, of alloy steel, hot rolled, forge quality, of grade AISI E8720M (Ca4 and Ca5), of specification AISI E8720M Ca4, AISI E8720H Ca4, ASTM E45, and ASTM A255, straightened in modified forge quality condition, with a diameter not exceeding 76 mm |
| 159 | 7228.30.00.71 | Steel | Other bars and rods, of alloy steel, hot rolled, forge quality, of grade AISI E9313-15M (Ca4), of specification AISI E9313-15M Ca4, ASTM E45, and ASTM A255, straightened in modified forge quality condition, with a diameter not exceeding 76 mm |
| 160 | 7228.30.00.71 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, aircraft quality, of grade AISI E9310, of specification MIL S7393 COMP3 COND E1, AMS 6260, AMS 2301, and ASTM A322, normalized and tempered, straightened, with a diameter not exceeding 76 mm |
| 161 | 7228.30.00.72 | Steel | Other round bars, of other alloy steel, hot-rolled, quenched and tempered, of grade 4140/4142, of specification ASTM A193 Grade B7, ASME SA193 Grade B7, ASTM A29, ASTM A304, ASTM A434 Class BC, ASTM A370, ASTM E112, ASTM E381, of a diameter of at least 76 mm but not exceeding 152.5 mm but not exceeding 30 feet |
| 162 | 7228.30.00.72 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade AISI 4150 UNS G41500, of specification ASTM A434 Class BD, ASTM A29, ASTM A370, and ASTM E112, of a diameter of at least 76 mm but not exceeding 152.5 mm but not exceeding 30 feet |
| 163 | 7228.30.00.72 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade 4140 Type L80, of specification ASTM A322, NACE MR0175, ASTM A370, ASTM E45, ASTM E112, API 6A PSL3 or ASTM A388, of a diameter of at least 76 mm but not exceeding 152.5 mm but not exceeding 30 feet |
| 164 | 7228.30.00.72 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade 4140/4142 Type 110, of specification ASTM A29, ASTM A434 Class BD, ASTM A370, ASTM E45, and ASTM E112, with a yield strength of at least 110 ksi, with a hardness of at least 285 HBW but not exceeding 341 HBW, of a diameter of at least 76 mm but not exceeding 152.5 mm but not exceeding 30 feet |
| 165 | 7228.30.00.72 | Steel | Other bars of other alloy steel, hot rolled, of grade 4340,of specification ASTM A434 Class BD and ASTM A29 and ASTM A370 and ASTM E112, with a diameter of at least 3.00 inches but not exceeding 5.98 inches, with a length of at least 10 feet but not exceeding 30 feet, with a yield strength of at least 130 ksi and with a hardness of at least 285 HBW but not exceeding 363 HBW |
| 166 | 7228.30.00.72 | Steel | Other bars, of alloy steel, hot rolled, of grade AISI 4130, of specification of standards API 6A 21st Edition, API 6D Appendix F, NACE MR0175/ISO 15156-2, API 16C, ASTM A29, ASTM A370, ASTM A388, ASTM A322, ASTM E112, ASTM E18, ASTM E10, ASTM A255, ASTM E23, and ASTM A304, with a diameter of at least 3 inches but not exceeding 5.98 inches |
| 167 | 7228.30.00.72 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322 and ASTM A304, with a diameter of at least 76 mm but not exceeding 152.5 mm, annealed |
| 168 | 7228.30.00.72 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grades AISI 4340/4340H, of specification ASTM A322 and ASTM A304, with a diameter of at least 76 mm but not exceeding 152.5 mm, annealed and straightened |
| 169 | 7228.30.00.72 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grades AISI 8620/8620H, of specification ASTM A322 and ASTM A304, with a diameter of at least 76 mm but not exceeding 152.5 mm, straightened in the as-rolled condition |
| 170 | 7228.30.00.72 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, aircraft quality, of grade AISI 4320/4320H, of specification ASTM A322, ASTM A304, ASTM A534, and AMS 2301, straightened in the as-rolled condition, with a diameter of at least 76 mm but not exceeding 152.5 mm |
| 171 | 7228.30.00.72 | Steel | Other bars and rods, of alloy steel, hot rolled, forge quality, of grade AISI E8720M (Ca4 and Ca5), of specification AISI E8720M Ca4, AISI E8720H Ca4, ASTM E45, and ASTM A255, straightened in modified forge quality condition, with a diameter of at least 76 mm but not exceeding 152.5 mm |
| 172 | 7228.30.00.72 | Steel | Alloy steel hot rolled forge quality bars of a grade AISI E9313-15M (Ca4) and of a specification AISI E9313-15M Ca4, ASTM E45, and ASTM A255, produced by electric arc furnace melting with vacuum degassing, hot rolled (not forged) in modified forge quality condition and straightened, with an outer diameter of at least 76 mm but not exceeding 152.5 mm |
| 173 | 7228.30.00.72 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, aircraft quality, of grade AISI E9310, of specification MIL S7393 COMP3 COND E1, AMS 6260, AMS 2301, and ASTM A322, normalized and tempered, straightened, with a diameter of at least 76 mm but not exceeding 152.5 mm |
| 174 | 7228.30.00.72 | Steel | Other bars and rods, of alloy steel, hot rolled, of grade AISI 4145H Modified, of specification API 7-1, ASTM A322, and ASTM A29, mechanical properties per ASTM A370, quenched and tempered, with a diameter of at least 76 mm but not exceeding 152.5 mm |
| 175 | 7228.30.00.73 | Steel | Other round bars, of other alloy steel, hot-rolled, quenched and tempered, of grade 4140/4142, of specification ASTM A193 Grade B7, ASME SA193 Grade B7, ASTM A29, ASTM A304, ASTM A434 Class BC, ASTM A370, ASTM E112, ASTM E381, with a diameter of at least 152 mm inches but not exceeding 228 mm but not exceeding 30 feet |
| 176 | 7228.30.00.73 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade AISI 4150 UNS G41500, of specification ASTM A434 Class BD, ASTM A29, ASTM A370, and ASTM E112, of a diameter of at least 152 mm but not exceeding 228 mm but not exceeding 30 feet |
| 177 | 7228.30.00.73 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade 4140 Type L80, of specification ASTM A322, NACE MR0175, ASTM A370, ASTM E45, ASTM E112, API 6A PSL3 or ASTM A388, of a diameter of at least 152 mm but not exceeding 228 mm but not exceeding 30 feet |
| 178 | 7228.30.00.73 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade 4140/4142 Type 110, of specification ASTM A29, ASTM A434 Class BD, ASTM A370, ASTM E45, and ASTM E112, with a yield strength of at least 110 ksi, with a hardness of at least 285 HBW but not exceeding 341 HBW, of a diameter of at least 152 mm but not exceeding 228 mm but not exceeding 30 feet |
| 179 | 7228.30.00.73 | Steel | Other bars and rods of alloy steel, hot rolled, of grade 4340, of specification ASTM A434 Class BD and ASTM A29 and ASTM A370 and ASTM E112, with a diameter of at least 152mm but not exceeding 228mm, with a yield strength of at least 130 ksi and with a hardness of at least 285 HBW but not exceeding 363 HBW |
| 180 | 7228.30.00.73 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4130, of specification API 6A 21st Edition PSL 1 to PSL2, with a diameter of at least 6 inches but not exceeding 8.97 inches |
| 181 | 7228.30.00.73 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322 and ASTM A304, with a diameter of at least 152 mm but not exceeding 228 mm, annealed |
| 182 | 7228.30.00.73 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grades AISI 4340/4340H, of specification ASTM A322 and ASTM A304, with a diameter of at least 152 mm but not exceeding 228 mm, annealed and straightened |
| 183 | 7228.30.00.73 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grades AISI 8620/8620H, of specification ASTM A322 and ASTM A304, with a diameter of at least 152 mm but not exceeding 228 mm, straightened in the as-rolled condition |
| 184 | 7228.30.00.73 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, aircraft quality, of grade AISI 4320/4320H, of specification ASTM A322, ASTM A304, ASTM A534, and AMS 2301, straightened in the as-rolled condition, with a diameter of at least 152 mm but not exceeding 228 mm |
| 185 | 7228.30.00.73 | Steel | Other bars and rods, of alloy steel, hot rolled, forge quality, of grade AISI E8720M (Ca6), of specification AISI E8720M Ca4, AISI E8720H Ca4, ASTM E45, and ASTM A255, straightened in modified forge quality condition, with a diameter of at least 152 mm but not exceeding 228 mm |
| 186 | 7228.30.00.73 | Steel | Other bars and rods, of alloy steel, hot rolled, forge quality, of grade AISI E9313-15M (Ca4), of specification AISI E9313-15M Ca4, ASTM E45, and ASTM A255, modified forge quality, straightened, with a diameter of at least 152 mm but not exceeding 228 mm |
| 187 | 7228.30.00.73 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, aircraft quality, of grade AISI E9310, of specification MIL S7393 COMP3 COND E1, AMS 6260, AMS 2301, and ASTM A322, normalized and tempered, straightened, with a diameter of at least 152 mm but not exceeding 228 mm |
| 188 | 7228.30.00.73 | Steel | Other bars and rods, of alloy steel, hot rolled, of grade AISI 4145H Modified, of specification API 7-1, ASTM A322, and ASTM A29, quenched and tempered, mechanical properties per ASTM A370, with a diameter of at least 152.5 mm but not exceeding 228 mm |
| 189 | 7228.30.00.74 | Steel | Other round bars, of other alloy steel, hot-rolled, quenched and tempered, of grade 4140/4142, of specification ASTM A193 Grade B7, ASME SA193 Grade B7, ASTM A29, ASTM A304, ASTM A434 Class BC, ASTM A370, ASTM E112, ASTM E381, with a diameter of at least 228 mm |
| 190 | 7228.30.00.74 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade 4140 Type L80, of specification ASTM A322, NACE MR0175, ASTM A370, ASTM E45, ASTM E112, API 6A PSL3 or ASTM A388, of a diameter of at least 228 mm |
| 191 | 7228.30.00.74 | Steel | Other round bars, of other alloy steel, hot rolled, quenched and tempered, of grade 4140/4142 Type 110, of specification ASTM A29, ASTM A434 Class BD, ASTM A370, ASTM E45, and ASTM E112, with a yield strength of at least 110 ksi, with a hardness of at least 285 HBW but not exceeding 341 HBW, of a diameter of at least 227.8 mm |
| 192 | 7228.30.00.74 | Steel | Other bars and rods of alloy steel, hot rolled, of grade 4340, of specification ASTM A434 Class BD and ASTM A29 and ASTM A370 and ASTM E112, with a diameter of at least 8.97 inches, with a yield strength of at least 130 ksi and with a hardness of at least 285 HBW but not exceeding 363 HBW |
| 193 | 7228.30.00.74 | Steel | Other bars and rods, other rounds, of carbon steel, hot rolled, of grade AISI 4130, of specification API 6A 21st Edition PSL 1 to PSL2, with a diameter of at least 8.97 inches |
| 194 | 7228.30.00.74 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322 and ASTM A304, with a diameter of at least 228 mm but not exceeding 342.9 mm, annealed |
| 195 | 7228.30.00.74 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grades AISI 4340/4340H, of specification ASTM A322 and ASTM A304, with a diameter of at least 228 mm but not exceeding 292.1 mm, annealed and straightened |
| 196 | 7228.30.00.74 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 8620/8620H, of specification ASTM A322 and ASTM A304, straightened in the as-rolled condition, with a diameter of at least 228 mm but not exceeding 342.9 mm |
| 197 | 7228.30.00.74 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, aircraft quality, of grade AISI 4320/4320H, of specification ASTM A322, ASTM A304, ASTM A534, and AMS 2301, straightened in the as-rolled condition, with a diameter of at least 228 mm but not exceeding 342.9 mm |
| 198 | 7228.30.00.74 | Steel | Other bars and rods, of alloy steel, hot rolled, forge quality, of grade AISI E8720M (Ca6), of specification AISI E8720M Ca4, AISI E8720H Ca4, ASTM E45, and ASTM A255, straightened in modified forge quality condition, with a diameter of at least 228 mm but not exceeding 355.6 mm |
| 199 | 7228.30.00.74 | Steel | Other bars and rods, of alloy steel, hot rolled, forge quality, of grade AISI E9313-15M (Ca4), of specification AISI E9313-15M Ca4, ASTM E45, and ASTM A255, modified forge quality, straightened, with a diameter of at least 228 mm but not exceeding 355.6 mm |
| 200 | 7228.30.00.74 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, aircraft quality, of grade AISI E9310, of specification MIL S7393 COMP3 COND E1, AMS 6260, AMS 2301, and ASTM A322, normalized and tempered, straightened, with a diameter of at least 228 mm but not exceeding 292.1 mm |
| 201 | 7228.30.00.74 | Steel | Other bars and rods, of alloy steel, hot rolled, of grade AISI 4145H Modified, of specification API 7-1, ASTM A322, and ASTM A29, quenched and tempered, mechanical properties per ASTM A370, with a diameter of at least 228 mm but not exceeding 317.5 mm |
| 202 | 7228.50.00 | Steel | Steel round bars, of alloy steel, cold rolled, of grade 433M, with a diameter of 2.25 inches, with a length of 144 inches |
| 203 | 7228.50.00 | Steel | Steel round bars, of alloy steel, cold rolled, of grade 433M, with a diameter of 2.25 inches, with a length of 144 inches |
| 204 | 7228.50.00.90 | Steel | Alloy steel bars, of grade 5160, cold-drawn and not further worked than cold-formed or cold-finished, with a diameter of at least 17.0 mm but not exceeding 18.3 mm |
| 205 | 7228.50.00.90 | Steel | Alloy steel bars, of grade 9254, cold-drawn and not further worked than cold-formed or cold-finished, with a diameter of at least 13.5 mm but not exceeding 20.7 mm |
| 206 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4130, of specification API 6A 21st Edition PSL 1 to PSL 2, with an outer diameter of at least 76mm but not exceeding 152.5mm inches, peeled or rough turned surface condition |
| 207 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4130, of specification API 6A 21st Edition PSL 1 to PSL 2, with an outer diameter of at least 76mm but not exceeding 152.5mm inches, peeled or rough turned surface condition |
| 208 | 7228.50.00.90 | Steel | Alloy steel bars, hot rolled (not forged), of a grade AISI 4130, of a specification API 6A 21st Edition PSL 1 to PSL 2, of standards API 6A 21st Edition, API 6D Appendix F, NACE MR0175/ISO 15156-2, API 16C, ASTM A29, ASTM A370, ASTM A388, ASTM A322, ASTM E112, ASTM E18, ASTM E10, ASTM A255, ASTM E23, and ASTM A304, with an outer diameter of at least 6.00 inches but not exceeding 8.97 inches, peeled or rough turned surface |
| 209 | 7228.50.00.90 | Steel | Alloy steel bars, hot rolled (not forged), of a grade AISI 4130, of a specification API 6A 21st Edition PSL 1 to PSL 2, of standards API 6A 21st Edition, API 6D Appendix F, NACE MR0175/ISO 15156-2, API 16C, ASTM A29, ASTM A370, ASTM A388, ASTM A322, ASTM E112, ASTM E18, ASTM E10, ASTM A255, ASTM E23, and ASTM A304, with an outer diameter of at least 6.00 inches but not exceeding 8.97 inches, peeled or rough turned surface |
| 210 | 7228.50.00.90 | Steel | Alloy steel hot rolled bars, of a grade AISI 4130, of a specification API 6A 21st Edition PSL 1 to PSL 2, hot rolled (not forged), quenched and tempered, of standards API 6A 21st Edition, API 6D Appendix F, NACE MR0175/ISO 15156-2, API 16C, ASTM A29, ASTM A370, ASTM A388, ASTM A322, ASTM E112, ASTM E18, ASTM E10, ASTM A255, ASTM E23, and ASTM A304, with an outer diameter of at least 6.00 inches but not exceeding 8.97 inches, peeled or rough turned surface |
| 211 | 7228.50.00.90 | Steel | Alloy steel hot rolled bars, of a grade AISI 4130, of a specification API 6A 21st Edition PSL 1 to PSL 2, hot rolled (not forged), quenched and tempered, of standards API 6A 21st Edition, API 6D Appendix F, NACE MR0175/ISO 15156-2, API 16C, ASTM A29, ASTM A370, ASTM A388, ASTM A322, ASTM E112, ASTM E18, ASTM E10, ASTM A255, ASTM E23, and ASTM A304, with an outer diameter of at least 6.00 inches but not exceeding 8.97 inches, peeled or rough turned surface |
| 212 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322 and ASTM A304, with a diameter not exceeding 76 mm, annealed, peeled or rough turned |
| 213 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322 and ASTM A304, with a diameter not exceeding 76 mm, annealed, peeled or rough turned |
| 214 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322, ASTM A304, ASTM A29/A29M, with a diameter of at least 76 mm but not exceeding 152.5 mm, annealed, peeled or rough turned |
| 215 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322, ASTM A304, ASTM A29/A29M, with a diameter of at least 76 mm but not exceeding 152.5 mm, annealed, peeled or rough turned |
| 216 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of carbon steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322, ASTM A304, and ASTM A29/A29M, with a diameter of at least 228 mm, annealed, straightened, peeled, and rough turned. |
| 217 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of carbon steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322, ASTM A304, and ASTM A29/A29M, with a diameter of at least 228 mm, annealed, straightened, peeled or rough turned. |
| 218 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322, ASTM A304, and ASTM A29/A29M, with a diameter of at least 228mm, peeled or rough turned. |
| 219 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grade AISI 4140/4142, of specification ASTM A322, ASTM A304, and ASTM A29/A29M, with a diameter of at least 228mm, peeled or rough turned. |
| 220 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grades AISI 4340/4340H, of specification ASTM A322, ASTM A304, and ASTM A29/A29M, with a diameter of at least 228 mm but not exceeding 292.1 mm, annealed, straightened, peeled or rough turned |
| 221 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, hot rolled, of grades AISI 4340/4340H, of specification ASTM A322, ASTM A304, and ASTM A29/A29M, with a diameter of at least 228 mm but not exceeding 292.1 mm, annealed, straightened, peeled, or rough turned |
| 222 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, of grade AISI 8620/8620H, of specification ASTM A322, ASTM A304, and ASTM A29/A29M, straightened, peeled or rough turned in the as-rolled condition, with a diameter of at least 228 mm but not exceeding 342.9mm |
| 223 | 7228.50.00.90 | Steel | Other bars and rods, other rounds, of alloy steel, of grade AISI 8620/8620H, of specification ASTM A322, ASTM A304, and ASTM A29/A29M, straightened, peeled or rough turned in the as-rolled condition, with a diameter of at least 228 mm but not exceeding 342.9mm |
| 224 | 7228.70.00.22 | Steel | Wide flange beams, of low-alloy weathering steel, hot-rolled, of standards ASTM A588 Grade B, ASTM A709 Grade 50W Type B (345W) and ASTM A6, of a W16 x 45 profile (nominal depth of 16 inches and nominal weight of 45 pounds per foot), with a length of 40 feet, of a height exceeding 150mm, uncoated. |
| 225 | 7228.70.00.99 | Steel | Angles, of weathering steel, hot rolled, of a grade ASTM A588, with unequal legs with a leg dimension of 5.00 inches by 3.50 inches, with a thickness of 0.375 inches, with a length of 240 inches. |
| 226 | 7228.70.00.99 | Steel | Angles, of weathering steel, hot-rolled, of a grade ASTM A588, with equal legs with leg dimensions of 3.50 inches by 3.50 inches, with a thickness of 0.375 inches, and with a length of 480 inches. |
| 227 | 7228.70.00.99 | Steel | Angles, of weathering steel, hot rolled, of grade ASTM A588, with equal legs with leg dimension of 3 inches by 3 inches, with a thickness of 0.25 inches, with a length of 480 inches |
| 228 | 7228.70.00.99 | Steel | Angles, of weathering steel, hot rolled, of grade ASTM A588, with unequal legs with a leg dimension of 3 inches by 2 inches, with a thickness of 0.25 inches, with a length of 240 inches |
| 229 | 7228.70.00.99 | Steel | Angles, of weathering non-alloy steel, hot rolled, of grade ASTM A588, with equal legs with a leg dimension of 3 inches by 3 inches, with a thickness of 0.375 inches, with a length of 480 inches |
| 230 | 7228.70.00.99 | Steel | Angles, of square bar, of weathering non-alloy steel, hot rolled, of grade ASTM A588, with equal legs with a leg dimension of 0.625 inches by 0.625 inches, with a thickness of 0.375 inches, with a length of 240 inches |
| 231 | 7302.10.00 | Steel | Rails ferroviaires, en acier au carbone laminé à chaud, conformes aux normes de l’AREMA, d’un profil 115RE ou 136RE, à section transversale en forme de T inversé, d’un poids nominal d’environ 56,9 kg par mètre linéaire, avec une hauteur de 168,3 mm, avec une largeur de tête de 69,1 mm, avec une largeur de base de 139,7 mm et avec une section transversale approximative de 72,6 cm². |
| 232 | 7302.10.00 | Steel | Rails ferroviaires, en acier au carbone laminé à chaud, conformes aux normes de l’AREMA, avec une section transversale en forme de T inversé, d’un poids nominal d’environ 67,5 kilogrammes par mètre linéaire, avec une hauteur de 185,7 mm, avec une largeur de tête de 74,6 mm, avec une largeur de base de 152,4 mm et avec une section transversale approximative de 85,9 cm². |
| 233 | 7302.10.00.11 | Steel | Steel compromise Rails: Forged and welded transition rails of width of at least 5.50 inches but not exceeding 6.00 inches and of height of at least 6.00 inches but not exceeding 7.31 inches; overall rail length of at least 6 feet but not exceeding 26 feet from end to end; of combinations of 100-115 lb/yd, or 100-132 lb/yd, or 100-136 lb/yd, or 115-132 lb/yd, or 115-136 lb/yd; heavier rail section heated and forged to match the lighter profile, both profiles welded together; supplied drilled or undrilled as required. |
| 234 | 7302.10.00.11 | Steel | Steel machined stock rails of width of at least 5.50 inches but not exceeding 6.00 inches and of height of at least 6.00 inches but not exceeding 7.31 inches, of weight 100 lb/yd, or 115 lb/yd, or 132 lb/yd, or 136 lb/yd, of lengths of at least 39 feet but not exceeding 78 feet; manufactured with Samson undercut to match switch‑point profile; supplied undrilled or drilled for standard rail‑seat configurations. |
| 235 | 7302.10.00.11 | Steel | Profile‑reduced transition rails: of weight 100 lb/yd, or 115 lb/yd, or 132 lb/yd, or 136 lb/yd; of width of at least 5.50 inches but not exceeding 6.00 inches and of height of at least 6.00 inches but not exceeding 7.31 inches; gradually machined to match worn rail profiles; of overall lengths of 19 feet 6 inches or 39 feet; provided with or without drilling patterns. |
| 236 | 7302.10.00.11 | Steel | Steel joint bars, insulated heat‑treated: of 6‑hole configuration; of width of at least 5.50 inches but not exceeding 6.00 inches and of height of at least 6.00 inches but not exceeding 7.31 inches; of overall bar length of 36 inches; coated with insulating material; bolted to rail sections of 100 lb/yd, or 115 lb/yd, or 132 lb/yd, or 136 lb/yd with lengths ranging from 16 feet but not exceeding 39 feet using 1.00‑inch or 1.25‑inch joint bar bolts with insulating bushings and washers. |
| 237 | 7302.10.00.11 | Steel | Steel rail of width of at least 2.75 inches but not exceeding 2.94 inches at the head, and of base width of at least 5.00 inches but not exceeding 6.00 inches; of rail height of at least 6.00 inches but not exceeding 7.31 inches; lengths of at least 39 feet but not exceeding 80 feet; of weight 100 lb/yd, or 115 lb/yd, or 132 lb/yd, or 136 lb/yd; supplied in new, rolled, head‑hardened, or standard‑carbon form; undrilled; compatible with tie plates, or elastic fasteners as applicable. |
| 238 | 7302.30.90.00 | Steel | Alloy steel switch rail (switch points) of CN Specification 12‑16D for Head‑Hardened (HH) rail; corresponding with American Railway Engineering and Maintenance of Way Association (AREMA) requirements but may include CN‑specific limits; For 136LB Rail Points: of width of 6 inches, of height of 7.31inches, and of length of at least 31.5 feet but not exceeding 61.25 feet. For 115LB Rail Points: of width of 5.5 inches, of height of 6.63 inches, and of length of at least 16.5 feet but not exceeding 38.42 feet. |
| 239 | 7302.30.90.00 | Steel | Steel left‑hand and right‑hand switch points and matching stock rails with guage plates of specification ASTM A36 mild steel. Gauge plates of width of 7inches, of thickness 1 inch, and of length of at least 6.96 feet but not exceeding 7.67 feet; |
| 240 | 7302.30.90.00 | Steel | Slide plates and brace plates of width of 7inches,of length not exceeding 25feet, and of thickness of 1inch with a 0.25 inch‑deep machined stock‑rail pocket; |
| 241 | 7302.30.90.00 | Steel | Switch plates of width of 7inches, of thickness of 1inch and of length not exceeding 36inches, with welded shoulders for E‑2055 elastic fasteners; |
| 242 | 7302.30.90.00 | Steel | Steel switch rod assemblies of turnout numbers including No. 10,12,15,16,20, secured with grade 5 bolts of diameter of 0.75 inch, spring washers, and slotted nuts with cotter pins and rocker‑style clips. |
| 243 | 7302.30.90.00 | Steel | Steel Rail Bound Manganese(RBM) frogs with manganese insert of AREMA specification, of length of at least 28.5feet but not exceeding 48.5 feet, with bolts and locknuts of diameter of 1.38 inch and of grade 8; frog dimensions of #8 or #10 or #12 or #15 or #16 or #20 and rail weights of 100LB,or 115LB, or 136LB;Head‑Hardened (HH) alloy rail sections of Specification 12‑16D; Toe widths of at least 18inches but not exceeding 22 inches; Heel spreads of at least 14inches but not exceeding 25 inches. |
| 244 | 7302.30.90.00 | Steel | Self‑Guarded Manganese(SGM) frog of AREMA specification; Toe width of at least 26inches but not exceeding 29 inches; Heel width of at least 20inches but not exceeding 21inches, of length of at least 7.3 feet but not exceeding 11.4 feet; frog dimensions of #6 or #8 or #10, and rail weights of 100lb or 115lb or 136lb; |
| 245 | 7302.30.90.00 | Steel | Steel gauge plates of width of 7 inches, of thickness of 1 inch, and of lengths of at least 6.96 feet but not exceeding 7.67 feet,of grade ASTM A36; consisting of two half‑plates joined by a fiberglass‑reinforced insulation block of thickness of 0.75 inch, of width of 7 inches, and of length of 7.5 inches; secured with four Grade 5 bolts of diameter of 0.75 inch with spring washers and nuts; supplied for 115LB and 136LB rail turnout designs. |
| 246 | 7302.30.90.00 | Steel | Carbon steel guard rail assemblies for 115LB and 136LB rail sections; of type U69 guard bars, of lengths of at least 15 feet but not exceeding 30 feet. Plate width of 8 inches, of thickness of 1.25 inches, and of lengths of at least 24 inches but not exceeding 28 inches. |
| 247 | 7302.30.90.00 | Steel | Carbon steel frog plates of thickness of 0.75 inch, of width of 7 inches, and of lengths of at least 24 inches but not exceeding 48 inches, of grade ASTM A36; secured with E‑2055 elastic clips. |
| 248 | 7302.30.90.00 | Steel | Alloy steel heel rails of specification 12‑16D for Head‑Hardened (HH) rail; machined for AREMA 90‑degree frog heel or tapered low‑impact heel. For 136RE rail: of width of 6 inches, of height of 7.31 inches, and of lengths of at least 6 feet but not exceeding 24 feet. For 115LB rail: of width of 5.5 inches, of height of 6.63 inches, and of lengths of at least 6 feet but not exceeding 16.5 feet. |
| 249 | 7302.30.90.00 | Steel | High‑wear‑resistant steel flangeway filler material for full flange bearing crossings; installed between the traffic rail and guard rail to support wheel flange load; of thickness of 1.875 inches, of height of at least 5 inches but not exceeding 6 inches, and of lengths of at least 4 feet but not exceeding 20 feet. |
| 250 | 7302.30.90.00 | Steel | Hot‑rolled carbon steel hook plates of width of 4 inches, of thickness of 0.75 inch, and of lengths of 23 inches or 35 inches; suitable for 100LB, 112LB, 115LB, 124LB, 132LB, and 136LB rail sections; meeting AREMA Chapter 5, Section 1.1.3 requirements. |
| 251 | 7302.30.90.00 | Steel | Appareils de voie ferrée, en acier au carbone, constitués d’ensembles préassemblés d’aiguillage comprenant des pointes d’aiguillage, des rails porteurs, des blocs de talon, des plaques d’assise et des rails de guidage, conçus avec des rails de type 136 lb/yd et présentant une géométrie normalisée d’aiguillage #10, en configuration droite ou gauche, avec une longueur approximative des pointes d’aiguillage de 16 pieds 6 pouces, avec une longueur du cœur de croisement d’environ 11 pieds 4,5 pouces et avec une longueur totale d’environ 81 pieds 6,5 pouces. |
| 252 | 7302.40.00 | Steel | Plaques de base de rail en acier à haute teneur en carbone, de type 12, conformes aux exigences de l'AREMA, laminées et formées à chaud, de qualité ferroviaire, à double épaulement, d’une longueur de 355,6 mm, d’une largeur de 196,85 mm, avec une épaisseur centrale de 22,225 mm et des zones inclinées d’une épaisseur de 18,2625 mm, comportant huit trous carrés de 19,05 mm pour pointes ou ancrages, avec congés aux coins, disposés selon un entraxe normalisé, pour rails ayant une largeur de base de 152,4 mm. |
| 253 | 7302.40.00 | Steel | Plaques de base de rail en acier au carbone, de type 8, conformes aux exigences de l'AREMA, laminées et formées à chaud, à double épaulement, d’une longueur de 355,6 mm, d’une largeur de 190,5 mm, avec une épaisseur centrale de 23,8 mm et des zones inclinées d’une épaisseur de 20,625 mm, comportant des trous carrés pour pointes ou ancrages, disposés selon un entraxe normalisé, avec congés aux coins, pour rails ayant une largeur de base d’au moins 139,7 mm mais ne dépassant pas 141,275 mm. |
| 254 | 7302.40.00.00 | Steel | Steel Tie Plates, Double shoulder of hot rolled carbon steel; widths of 5.5 inches or 6 inches, suitable for 100lb, 112lb, 115lb, 124lb, 132lb, and 136lb rail sections; of widths of at least 7.5 inches but not exceeding 7.75 inches; of thickness of 1 inch reducing to 0.44 inches at ends, of lengths of 14 inches or 16 inches; Specifications of AREMA Chapter 5, Section 1.1.3 chemical composition requirements. |
| 255 | 7302.40.00.00 | Steel | Steel Tie Plates, Victor plate, hot rolled carbon steel; for 6-inch rail base sections for 132LB and 136LB rail; of width of 8 inches and of length of 18 inches; rail seat of thickness of 1-inch, outer plate reduced to 1/2 inch at the ends; plates fitted with 4 square spike holes compatible with E-2055 clips. |
| 256 | 7302.40.00.00 | Steel | Insulated joint bars of polymer‑bonded construction in 4‑hole or 6‑hole configurations; joint bars of widths of at least 2.03 inches but not exceeding 2.625 inches, of heights of at least 4.25 inches but not exceeding 5.00 inches, and of bar lengths of 24 inches or 36 inches; supplied with insulating end posts, insulating bushings, insulating washers, and polymer coating on all bar surfaces; designed for 100LB, 115LB, 132LB, and 136LB rail sections; installed using 1.00‑inch or 1.25‑inch diameter bolts with flat hardened steel washers and insulating components |
| 257 | 7302.40.00.00 | Steel | Steel base plates of mild‑steel ASTM A36; of thickness of 0.75 inch, of widths of at least 24 inches but not exceeding 48 inches, and of lengths of at least 3.5 feet but not exceeding 9 feet; used as multi‑tie plates beneath the frog for improved frog assembly support and load distribution; supplied with adjustable frog clamp and plate washer of ductile iron, secured with E‑2055 elastic clips. |
| 258 | 7302.40.00.00 | Steel | Éclisses de rail, en acier au carbone-manganèse laminé à chaud et usiné, conçues pour relier les profils 136RE et 132RE, conformes aux exigences de l’AREMA, d’une longueur de 36 pouces, comportant six perçages alternant trous ronds et oblongs, d’un diamètre de 1,25 pouce, disposés selon des entraxes normalisés de type 3,5 pouces par 6 pouces par 6 pouces, avec une géométrie asymétrique comprenant une barre intérieure et une barre extérieure distinctes, usinées afin de compenser les différences de hauteur, de masse et de profil entre les rails 136RE et 132RE. |
| 259 | 7302.40.00.00 | Steel | Éclisses de rail, en acier au carbone-manganèse laminé à chaud et usiné, conçues pour le profil 136RE, conformes aux exigences de l’AREMA, d’une longueur de 36 pouces, comportant six perçages alternant trous ronds et oblongs adaptés à des boulons de rail à collet ovale d’un diamètre de 1,0 pouce, avec des entraxes normalisés incluant environ 6 pouces de l’extrémité jusqu’au premier trou suivis d’entraxes de 6 pouces, 7,125 pouces, 6 pouces et 6 pouces, avec une géométrie symétrique. |
| 260 | 7302.40.00.00 | Steel | Éclisses de rail, en acier au carbone-manganèse laminé à chaud et usiné, de grades 900A ou 1100, conçues pour le profil 136RE, conformes aux exigences de l’AREMA, d’une longueur de 36 pouces, comportant six perçages alternant trous ronds et oblongs adaptés à des boulons de rail d’un diamètre de 1,125 pouce et d’une longueur de 6,5 pouces, avec une géométrie symétrique. |
| 261 | 7302.90.00 | Steel | Selles d’assise de rail, laminées à chaud, en acier à haute teneur en carbone, de spécification AREMA, d’une longueur de 14 pouces, d’une largeur de 7,5 pouces, d’une largeur d’encoche de 5,563 pouces, d’une épaisseur d’au moins 0,437 pouce mais n’excédant pas 0,937 pouce, d’une épaisseur d’encoche de 0,437 pouce, et d’un poids de 23,16 livres par plaque |
| 262 | 7302.90.00.00 | Steel | Steel 2055 e‑clips or butterfly‑style elastic clips; of steel spring composition; of clip width of at least 4 inches but not exceeding 4.19 inches and of overall formed height of at least 1.93 inches but not exceeding 2.13 inches; designed to provide toe load retention for rail sections of 100 lb/yd, 115 lb/yd, 132 lb/yd, or 136 lb/yd; installed with standard rail shoulders or baseplates; supplied with or without insulating inserts depending on track application. |
| 263 | 7302.90.00.00 | Steel | Steel rail anchors, of heat‑treated ASTM 1060 steel, designed for use on 100LB, 115LB, 132LB, 136LB, and 155LB rail sections; of width of 3.375 inches, and of thickness of 1.19 inches, and of length of 7.25 inches. |
| 264 | 7302.90.00.00 | Steel | Steel track bolts, frog bolts, compromise joint bolts, oval‑neck bolts, elastic‑clip bolts, hex nuts, lock nuts, flat washers, spring washers, and spherical washers, of grades 5 or 8; of bolt diameters of at least 0.625 inch but not exceeding 2.50 inches, and of bolt lengths of at least 3.00 inches but not exceeding 12.00 inches; of washer outer diameters of at least 1.75 inches but not exceeding 3.50 inches and of washer thickness of at least 0.20 inches but not exceeding 0.65 inches; manufactured of carbon‑steel or alloy‑steel, heat‑treated or standard finish; used for fastening rail sections of 100 lb/yd, 115 lb/yd, 132 lb/yd, or 136 lb/yd; compatible with joint bars, tie plates, rail clips, and insulated joint assemblies; supplied plain, galvanized, or insulated as required. |
| 265 | 7302.90.00.00 | Steel | Ductile iron boltless rail braces of widths of at least 3.6875 inches but not exceeding 5.375 inches, of length of 7 inches, and of height of at least 5.5 inches but not exceeding 5.75 inches; meeting AREMA specifications. |
| 266 | 7302.90.00.00 | Steel | Attaches élastiques de rail en acier à ressort, formées à froid, en aciers à ressort à haute teneur en silicium et en manganèse, de type e-clip 2055, conforme aux exigences de l’AREMA, traitées thermiquement, avec un diamètre de barre d’au moins 635 mm mais ne dépassant pas 812,8 mm, d’une hauteur de 106,3625 mm, avec une zone d’appui aplatie au niveau du pied du rail, fournissant une force de serrage de 24 460 N et une charge de maintien au pied du rail de 12 230 N, avec une déflexion de service de 11,1125 mm. |
| 267 | 7304.19.00 | Steel | Unfinished seamless carbon or alloy steel line pipe (“mother tubes”), outside diameter 184–610 mm, wall thickness 9–110 mm, length 7.72–15.24 m, not stenciled as meeting any line pipe product specification, suitable for use in the production (and not solely finishing) of seamless line pipe made to API 5L, CSA Z245.1, ISO 3183, ASTM A333, ASTM A335, ASTM A106, ASTM A53, or equivalent. |
| 268 | 7304.19.00.79 | Steel | Seamless line pipes, of carbon steel, of grade X52 and grade B, of specification API 5L and ASTM A106, seamless formed, with an outer diameter of 20'' and tichkness of 1.031'' without finish or coating. |
| 269 | 7304.19.00.79 | Steel | Seamless line pipes, of carbon steel, of grade X52 and grade B, of specification API 5L and ASTM A106, seamless formed, with an outer diameter of 18'' and thickness of 1.781'' without finish or coating. |
| 270 | 7304.19.00.79 | Steel | Seamless line pipes, of carbon steel, of grade X52 and grade B, of specification API 5L and ASTM A106, seamless formed, with an outer diameter of at least 323mm but not exceeding 406.4mm and a wall thickness of 21.43mm |
| 271 | 7304.31.00.10 | Steel | Mechanical tubing, of carbon steel, of grade AISI 1026, of specification ASTM A519, cold drawn seamless, stress relief annealed |
| 272 | 7304.31.00.90 | Steel | Hydraulic line tube, of carbon steel, of specification ASTM A179 and SAE J524, cold drawn seamless |
| 273 | 7304.39.00 | Steel | Seamless tubes and pipes, of circular cross-section, of non-alloy steel, of API 5CT, grades J55, K55, L80 and P110, supplied in straight lengths, plain end, for subsequent machining into oil and gas tubular couplings, with an outside diameter of at least 3.063 inches but not exceeding 10.71 inches, and with a wall thickness of at least 0.419 inches but not exceeding 1.16 inches |
| 274 | 7304.39.00 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106B, of specification V1500C1B, of an external diameter of at least 12.7mm but not exceeding 457.2mm |
| 275 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, other, of circular cross-section, of iron or non-alloy steel, other, standard pipes, of grade ASTM A106, of specification 150CS1, with an external diameter of 51 mm |
| 276 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, of grade ASTM A106, of specification 150CS1, of an external diameter of at least 19.05mm but not exceeding 60.3mm |
| 277 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel of grade ASTM A106, of specification 150CS1, of an external diameter of at least 12.7mm but not exceeding 60.3mm |
| 278 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 GrB, of specification V150C1B, of an external diameter of at least 12.7mm but not exceeding 60.3 mm |
| 279 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106B, of specification V1500C1B, of an external diameter exceeding 12.7mm but not exceeding 60.3mm |
| 280 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B or ASTM A53 Gr.B, of specification 150CS1, of an external diameter of at least 12.7mm but not exceeding 60.3mm |
| 281 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V150C1B, of an external diameter of at least 12.7mm but not exceeding 60.3mm |
| 282 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS1, of an external diameter of at least 12.7mm but not exceeding 60.3mm |
| 283 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V600C1B, of an external diameter of at least 12.7 mm but not exceeding 60.3mm |
| 284 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS4, of an external diameter of at least 12.7mm but not exceeding 60.3 mm |
| 285 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification V300C1B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 286 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification 600C1B, of an external diameter of at least 12.7mm but not exceeding 60.3 mm |
| 287 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 150SS10, Seamless (½"-2"), of an external diameter of at least 12.7 mm but not exceeding 60.3mm |
| 288 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS4, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 289 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 900CS1, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 290 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V900 C1B, of an external diameter of at least 12.7mm but not exceeding 60.3 mm |
| 291 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B or A53, of specification 150 CS3, of an external diameter of at least 12.7mm but not exceeding 60.3 mm |
| 292 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106C, of specification V1500C1B1, of external diameter of at least 12.7mm but not exceeding 60.3mm |
| 293 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V150C1B, of external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 294 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106 B, of specification V1500C1B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 295 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B or ASTM A53 Gr. B, of specification 150CS1, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 296 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS1, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 297 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V600C1B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 298 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V300C1B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 299 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V900C1B, of an external diameter of at least 12.7 mm but not exceeding 60.3mm |
| 300 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106 C, of specification V1500C1B1, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 301 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106 B, of specification V1500C1B2, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 302 | 7304.39.00.11 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification 150CS3, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 303 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, of grade ASTM A106, of specification 300CS1, of external diameter of 203.2mm |
| 304 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, of grade ASTM A106, of specification 150CS1, of an external diameter of exceeding 60.3mm but not exceeding 152.4mm |
| 305 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, of grade ASTM A53 and ASTM A106 GRB, of specification 150CS3, with an external diameter of 101.6mm |
| 306 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel of grade ASTM A106, of specification 150CS1, of an external diameter exceeding 60.3mm but not exceeding 219.1mm |
| 307 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106, of specification 300CS1, of an external diameter of at least 101.6mm but not exceeding 152.4mm |
| 308 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 GrB, of specification V150C1B, of an external diameter of exceeding 60.3mm but not exceeding 203.2mm |
| 309 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106B, of specification V1500C1B, of an external diameter exceeding 60.3mm but not exceeding 219.1mm |
| 310 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B or ASTM A53 Gr.B, of specification 150CS1, of an external diameter exceeding 60.3mm but not exceeding 219.1mm |
| 311 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V150C1B, of an external diameter exceeding 60.3mm, but not exceeding 219.1mm |
| 312 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS1, of an external diameter of exceeding 60.3mm but not exceeding 219.1 mm |
| 313 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V600C1B, of an external diameter of exceeding 60.3mm but not exceeding 219.1 mm |
| 314 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS4, of an external diameter exceeding 60.3mm but not exceeding 219.1mm |
| 315 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification V300C1B, of an external diameter exceeding 60.3mm but not exceeding 219.1 mm |
| 316 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification 600C1B, of an external diameter exceeding 60.3mm but not exceeding 219.1 mm |
| 317 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 150SS10, Seamless (½"-2"), of an external diameter exceeding 60.3mm but not exceeding 219.1 mm |
| 318 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS4, of an external diameter exceeding 60.3mm but not exceeding 219.1mm |
| 319 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 900CS1, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 320 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V900 C1B, of an external diameter exceeding 60.3 mm but not exceeding 219.1mm |
| 321 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B or A53, of specification 150 CS3, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 322 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106C, of specification V1500C1B1, of external diameter exceeding 60.3 mm but not exceeding 219.1mm |
| 323 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V150C1B, of external diameter exceeding 60.3mm but not exceeding 219.1 mm |
| 324 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106 B, of specification V1500C1B, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 325 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B or ASTM A53 Gr. B, of specification 150CS1, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 326 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS1, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 327 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V600C1B, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 328 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V300C1B, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 329 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V900C1B, of an external diameter exceeding 60.3 m but not exceeding 219.1 mm |
| 330 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106 C, of specification V1500C1B1, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 331 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106 B, of specification V1500C1B2, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 332 | 7304.39.00.21 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification 150CS3, of an external diameter exceeding 60.3 mm but not exceeding 203.2 mm |
| 333 | 7304.39.00.29 | Steel | Tubes, pipes and hollow profiles, of grade ASTM A53 and ASTM A106 GRB, of specification 150CS3, with an external diameter of 101.6mm |
| 334 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel of grade ASTM A106, of specification 150CS1, of an external diameter exceeding 219.1mm but not exceeding 355.6mm |
| 335 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106B, of specification V1500C1B, of an external diameter exceeding 219.1mm but not exceeding 355.6mm |
| 336 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B or ASTM A53 Gr.B, of specification 150CS1, of an external diameter exceeding 219mm but not exceeding 355.6mm |
| 337 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V150C1B, of an external diameter exceeding 219.1mm but not exceeding 355.6mm |
| 338 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS1, of an external diameter of exceeding 219.1mm but not exceeding 355.6mm |
| 339 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V600C1B, of an external diameter exceeding 219.1mm but not exceeding 304.8mm |
| 340 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS4, of an external diameter exceeding 219.1mm but not exceeding 355.6mm |
| 341 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification V300C1B, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 342 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification 600C1B, of an external diameter exceeding 219.1 mm but not exceeding 304.8 mm |
| 343 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 150SS10, Seamless (½"-2"), of an external diameter exceeding 219.1mm but not exceeding 304.8 mm |
| 344 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS4, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 345 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 900CS1, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 346 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V900 C1B, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 347 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B or A53, of specification 150 CS3, |
| 348 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106C, of specification V1500C1B1, of external diameter exceeding 219.1mm but not exceeding 355.6 mm |
| 349 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V150C1B, of external diameter exceeding 219.1mm but not exceeding 355.6 mm |
| 350 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106 B, of specification V1500C1B, of an external diameter exceeding 219.1mm but not exceeding 355.6mm |
| 351 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B or ASTM A53 Gr. B, of specification 150CS1, of an external diameter exceeding 219.1 mm but not exceeding 355.6mm |
| 352 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS1, of an external diameter exceeding 219.1 mm but not exceeding 355.6mm |
| 353 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V600C1B, of an external diameter exceeding 219.1 mm but not exceeding 304.8 mm |
| 354 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V600C1B, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 355 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V300C1B, of an external diameter exceeding 219.1mm but not exceeding 355.6 mm |
| 356 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V900C1B, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 357 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106 C, of specification V1500C1B1, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 358 | 7304.39.00.31 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106 B, of specification V1500C1B2, of an external diameter exceeding 219.1mm but not exceeding 355.6mm |
| 359 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106B, of specification V1500C1B, of an external diameter exceeding 355.6mm but not exceeding 457.2mm |
| 360 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B or ASTM A53 Gr.B, of specification 150CS1, of an external diameter exceeding 355.6mm but not exceeding 610mm |
| 361 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V150C1B, of an external diameter exceeding 355.6mm but not exceeding 610mm |
| 362 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS1, of an external diameter exceeding 355.6 mm but not exceeding 610 mm |
| 363 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS4, of an external diameter exceeding 355.6 mm but not exceeding 610 mm |
| 364 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification V300C1B, of an external diameter exceeding 355.6mm but not exceeding 609.6 |
| 365 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 150SS10, Seamless (½"-2"), of an external diameter exceeding 304.8 mm but not exceeding 609.6 mm |
| 366 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS4, of an external diameter exceeding 355.6mm but not exceeding 610 mm |
| 367 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 900CS1, of an external diameter exceeding 355.6mm but not exceeding 609.6 mm |
| 368 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B or A53, of specification 150 CS3, |
| 369 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106C, of specification V1500C1B1, of external diameter exceeding 355.6mm but not exceeding 457.2 mm |
| 370 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V150C1B, of external diameter of exceeding 355.6 mm but not exceeding 610 mm |
| 371 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASME SA 106 B, of specification V1500C1B, of an external diameter exceeding 355.6 mm but not exceeding 457.2 mm |
| 372 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B or ASTM A53 Gr. B, of specification 150CS1, of an external diameter exceeding 355.6 mm but not exceeding 610 mm |
| 373 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS1, of an external diameter exceeding 355.6 mm but not exceeding 610 mm |
| 374 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V600C1B, of an external diameter exceeding 355.6 mm but not exceeding 610 mm |
| 375 | 7304.39.00.41 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V300C1B, of an external diameter exceeding 355.6 mm but not exceeding 609.6 |
| 376 | 7304.39.00.51 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B or ASTM A53 Gr.B, of specification 150CS1, of an external diameter exceeding 610mm but not exceeding 914.4mm |
| 377 | 7304.39.00.51 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V150C1B, of an external diameter exceeding 610mm but not exceeding 812.8mm |
| 378 | 7304.39.00.51 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS1, of an external diameter exceeding 610mm but not exceeding 914.4mm |
| 379 | 7304.39.00.51 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS4, of an external diameter of exceeding 610mm but not exceeding 762 mm |
| 380 | 7304.39.00.51 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS4, of an external diameter exceeding 610mm but not exceeding 762 mm |
| 381 | 7304.39.00.51 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr B, of specification V150C1B, of an external diameter exceeding 610 mm but not exceeding 812.12 mm |
| 382 | 7304.39.00.51 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B or ASTM A53 Gr. B, of specification 150CS1, of an external diameter of exceeding 610 mm but not exceeding 914.4mm |
| 383 | 7304.39.00.51 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr.B, of specification 300CS1, of an external diameter exceeding 610 mm but not exceeding 914.4 mm |
| 384 | 7304.39.00.51 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V600C1B, of an external diameter exceeding 610 mm |
| 385 | 7304.39.00.51 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of iron or non-alloy steel, of grade ASTM A106 Gr. B, of specification V300C1B, of an external diameter exceeding 610 mm |
| 386 | 7304.39.00.70 | Steel | Mechanical tubing, of carbon steel, of grade AISI 1026, of specification ASTM A519 and ASTM A106 Grade B/C, hot finished seamless |
| 387 | 7304.41.00 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross section, of stainless steel, cold-drawn or cold-rolled (cold reduced), of a nominal pipe size of 2 inches or less, not further worked than straight lengths (not prefabricated) |
| 388 | 7304.41.00 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross section, of stainless steel, cold-drawn or cold-rolled (cold reduced), of a nominal pipe size exceeding 2 inches, prefabricated |
| 389 | 7304.41.00.10 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of stainless steel, cold-drawn or cold-rolled, of grade ASTM A790 UNS S31803, of specification V300H3A, of an external diameter of at least 12.7 mm but not exceeding 19 mm |
| 390 | 7304.41.00.10 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of stainless steel, cold-drawn or cold-rolled, of grade ASTM A790 UNS S31803, of specification V150H3A, of an external diameter of at least 12.7 mm but not exceeding 19 mm |
| 391 | 7304.41.00.90 | Steel | U-shaped heat exchanger tubing, seamless, of stainless steel, of a grade TP304L, of a specification ASTM SA-213, corrosion resistant, with an outer diameter of 19.05 mm, of a wall thickness of 0.049 inches, with a minimum length of 536.534 inches and a maximum of 597.878 inches (before bending). |
| 392 | 7304.41.00.90 | Steel | Other tubes, pipes, and hollow profiles of steel, seamless, of grade 316L, of specification ASTM A511, cold‑drawn, of a uniform square cross-section, with no post‑forming annealing, with a radius of 7 mm with a width of 150 mm, with a height of 190 mm, with a wall thickness of 5 mm and a length of 6,096 mm. |
| 393 | 7304.41.00.90 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of stainless steel, cold-drawn or cold-rolled, of grade ASTM A790 UNS S31803, of specification V300H3A, of an external diameter exceeding 19 mm but not exceeding 762 mm |
| 394 | 7304.41.00.90 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of stainless steel, cold-drawn or cold-rolled, of grade ASTM A790 UNS S31803, of specification V150H3A, of an external diameter exceeding 19 mm but not exceeding 762 mm |
| 395 | 7304.51.00.00 | Steel | Mechanical tubing, of alloy steel, of grade 4130, of specification ASTM A519 and AMS 6736, cold drawn seamless, supplied in Condition N, manufactured by electric arc furnace with vacuum degassing |
| 396 | 7304.59.00.13 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P11, of specification 900LA1, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 397 | 7304.59.00.13 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 P11, of specification V300C3B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 398 | 7304.59.00.13 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 P11, of specification V300C3B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 399 | 7304.59.00.14 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P22, of specification V1500C5B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 400 | 7304.59.00.14 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335_P22, of specification V1500C3B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 401 | 7304.59.00.14 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335_P22, of specification V2500C3B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 402 | 7304.59.00.14 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335_P22, of specification V1500C5B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 403 | 7304.59.00.14 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335_P22, of specification V1500C3B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 404 | 7304.59.00.14 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 355_P22, of specification V2500C3B, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 405 | 7304.59.00.15 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P91, Type 2, of specification 900LA2, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 406 | 7304.59.00.15 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P91, Type 2, of specification 1500LA2, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 407 | 7304.59.00.15 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P91 Type 1, of specification V1500C5B1, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 408 | 7304.59.00.15 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P91 TYPE1, of specification V1500C5B1, of an external diameter of at least 12.7 mm but not exceeding 60.3 mm |
| 409 | 7304.59.00.23 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P11, of specification 900LA1, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 410 | 7304.59.00.23 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 P11, of specification V300C3B, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 411 | 7304.59.00.23 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 P11, of specification V300C3B, of an external diameter exceeding 60.3 mm but not exceeding 219.1mm |
| 412 | 7304.59.00.24 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P22, of specification V1500C5B, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 413 | 7304.59.00.24 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335_P22, of specification V1500C3B, of an external diameter exceeding 60.3 mm but not exceeding 101.6 mm |
| 414 | 7304.59.00.24 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335_P22, of specification V2500C3B, of an external diameter exceeding 60.3 mm but not exceeding 101.6 mm |
| 415 | 7304.59.00.24 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335_P22, of specification V1500C5B, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 416 | 7304.59.00.24 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335_P22, of specification V1500C3B, of an external diameter exceeding 60.3 mm but not exceeding 101.6 mm |
| 417 | 7304.59.00.24 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 355_P22, of specification V2500C3B, of an external diameter exceeding 60.3 mm but not exceeding 101.6 mm |
| 418 | 7304.59.00.25 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P91, Type 2, of specification 900LA2, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 419 | 7304.59.00.25 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P91, Type 2, of specification 1500LA2, of an external diameter of at least 60.3 mm but not exceeding 219.1 mm |
| 420 | 7304.59.00.25 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P91 Type 1, of specification V1500C5B1, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 421 | 7304.59.00.25 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P91 TYPE1, of specification V1500C5B1, of an external diameter exceeding 60.3 mm but not exceeding 219.1 mm |
| 422 | 7304.59.00.33 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P11, of specification 900LA1, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 423 | 7304.59.00.33 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 P11, of specification V300C3B, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 424 | 7304.59.00.33 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 P11, of specification V300C3B, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 425 | 7304.59.00.34 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P22, of specification V1500C5B, of an external diameter exceeding 219.1mm but not exceeding 355.6 mm |
| 426 | 7304.59.00.34 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335_P22, of specification V1500C5B, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 427 | 7304.59.00.35 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P91, Type 2, of specification 900LA2, of a diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 428 | 7304.59.00.35 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P91, Type 2, of specification 1500LA2, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 429 | 7304.59.00.35 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P91 Type 1, of specification V1500C5B1, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 430 | 7304.59.00.35 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P91 TYPE1, of specification V1500C5B1, of an external diameter exceeding 219.1 mm but not exceeding 355.6 mm |
| 431 | 7304.59.00.43 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 P11, of specification V300C3B, of an external diameter exceeding 355.6 mm but not exceeding 609.6 mm |
| 432 | 7304.59.00.43 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 P11, of specification V300C3B, of an external diameter exceeding 355.6 mm but not exceeding 609.6 mm |
| 433 | 7304.59.00.44 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P22, of specification V1500C5B, of an external diameter exceeding 355.6 mm but not exceeding 609.6 mm |
| 434 | 7304.59.00.44 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335_P22, of specification V1500C5B, of an external diameter exceeding 355.6 mm but not exceeding 609.6 mm |
| 435 | 7304.59.00.45 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P91, Type 2, of specification 900LA2, of an external diameter exceeding 355.6mm but not exceeding 610 mm |
| 436 | 7304.59.00.45 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P91, Type 2, of specification 1500LA2, of an external diameter exceeding 355.6mm but not exceeding 610 mm |
| 437 | 7304.59.00.45 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P91 Type 1, of specification V1500C5B1, of an external diameter exceeding 355.6 mm but not exceeding 609.6 mm |
| 438 | 7304.59.00.45 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASME SA 335 P91 TYPE1, of specification V1500C5B1, of an external diameter exceeding 355.6 mm but not exceeding 609.6 |
| 439 | 7304.59.00.55 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P91, Type 2, of specification 900LA2, of an external diameter exceeding 610 mm but not exceeding 762 mm |
| 440 | 7304.59.00.55 | Steel | Tubes, pipes and hollow profiles, seamless, other, of circular cross-section, of other alloy steel, other, of grade ASTM A335 Gr.P91, Type 2, of specification 1500LA2, of an external diameter exceeding 610 mm but not exceeding 762 mm |
| 441 | 7304.90.00.20 | Steel | Mechanical tubing, of alloy steel, of grades AISI 4140/4142, of specification ASTM A519, hot finished seamless, produced by electric arc furnace with vacuum degassing, annealed |
| 442 | 7304.90.00.20 | Steel | Mechanical tubing, of alloy steel, of grades AISI 4140/4142, of specification ASTM A519, hot finished seamless, melted by electric arc furnace with vacuum degassing, supplied in quenched and tempered condition |
| 443 | 7304.90.00.20 | Steel | Mechanical tubing, of alloy steel, of grade 4130, of specification ASTM A519 and API 5CT L80, hot finished seamless, Quench & tempered, manufactured by electric arc furnace with vacuum degassing, supplied in hot finished seamless condition |
| 444 | 7304.90.00.20 | Steel | Mechanical tubing, of alloy steel, of grade 4130 M7 Impact 7, of specification ASTM A519, hot finished seamless, Quench & Tempered, manufactured by electric arc furnace with vacuum degassing, supplied in hot finished condition |
| 445 | 7305.31.00.19 | Steel | Pipes, longitudinally submerged arc welded, of carbon steel, of grade C, of specification ASTM A500, with an outer diameter of 508.0 mm, and of a wall thickness of at least 6.35 mm but not exceeding 25.4 mm, with dimensions Pipe 20''outer dimension x 0.250'' thick, Pipe 20'' outer dimension x 0.375'' thick, Pipe 20'' outer dimension x 0.500'' thick, Pipe 20'' outer dimension x 1.000'' thick without finish or coating. |
| 446 | 7305.31.00.19 | Steel | Pipes, longitudinally submerged arc welded, of carbon steel, of grade C, of specification ASTM A500, with an outer diameter of 457.2 mm, and with a wall thickness of at least 7.95 mm but not exceeding 19.05 mm with dimensions Pipe 18'' outer dimension x 0.313'' thick, Pipe 18'' outer dimension x 0.375'' thick, Pipe 18'' outer dimension x 0.500'' thick, Pipe 18'' outer dimension x 0.750'' thick, without finish or coating . |
| 447 | 7305.31.00.19 | Steel | Pipes, longitudinally submerged arc welded, of carbon steel, of grade C, of specification ASTM A500, with an outer diameter of 508.0 mm, and with a wall thickness of 6.35 mm |
| 448 | 7305.31.00.19 | Steel | Pipes, longitudinally submerged arc welded, of carbon steel, of grade C, of specification ASTM A500, with an outer diameter of 457.2 mm, and with a wall thickness of at least 6.35 mm but not exceeding 22.225 mm |
| 449 | 7305.31.00.19 | Steel | Welded steel pipe, of circular cross-section, of non-alloy steel, longitudinally seam-welded (LSAW), with ends plain or bevelled, with or without internal and/or external coating |
| 450 | 7305.39.00 | Steel | Carbon steel pipe spool, of grade E, of specification ASTM A139 or API 5L grade X52, electric fusion welded, with an external diameter of 30 inches, with a wall thickness of 0.375 inches, with a length of 60 feet, internally lined with a nominal 1.25 inch urethane lining, with pipe ends of various types (lap joint, for mechanical coupling, slip-on raised face) |
| 451 | 7305.39.00 | Steel | Temporary steel piles, spiral welded, with a pipe outer diameter of 0.914 m, and a length of at least 59 m but not exceeding 75 meters |
| 452 | 7305.39.00 | Steel | Spiral welded steel pipe piles, of carbon steel, of an outside diameter of 610 millimetres and a wall thickness of 12.7 millimetres, for use as deep foundation piles, quantity 16 pieces |
| 453 | 7305.39.00.20 | Steel | Welded steel pipe, of circular cross-section, of non-alloy steel, helical or spiral seam-welded, with ends plain or bevelled, with or without internal and/or external coating |
| 454 | 7306.29.00.56 | Steel | Tubing of heat-treated, welded carbon steel, threaded and coupled to API 5CT specifications, of API grades N80, L80, or P110, of a length of no less than 7.6 meters but not exceeding 10.4 meters, of an external diameter of 60.3 mm but not exceeding 88.9 mm, and with a nominal wall thickness of 4.826 mm. |
| 455 | 7306.29.00.57 | Steel | Tubing of heat-treated, welded carbon steel, premium or semi-premium, threaded and coupled to API 5CT specifications, of API grades N80, L80, or P110, of a length of no less than 7.6 meters but not exceeding 10.4 meters, of an external diameter of 60.3 mm but not exceeding 88.9 mm, and with a nominal wall thickness of 4.826 mm. |
| 456 | 7306.29.00.66 | Steel | Tubing of heat-treated, welded carbon steel, threaded and coupled to API 5CT specifications, of API grades N80, L80, or P110, of a length of no less than 7.6 meters but not exceeding 10.4 meters, of an external diameter exceeding 60.3 mm but not exceeding 73 mm, and with a nominal wall thickness of 5.5118 mm. |
| 457 | 7306.29.00.67 | Steel | Tubing of heat-treated, welded carbon steel, premium or semi-premium, threaded and coupled to API 5CT specifications, of API grades N80, L80, or P110, of a length of no less than 7.6 meters but not exceeding 10.4 meters, of an external diameter exceeding 60.3 mm but not exceeding 73 mm, and with a nominal wall thickness of 5.5118 mm. |
| 458 | 7306.29.00.76 | Steel | Tubing of heat-treated, welded carbon steel, threaded and coupled to API 5CT specifications, of API grades N80, L80, or P110, of a length of no less than 7.6 meters but not exceeding 10.4 meters, of an external diameter exceeding 73 mm but not exceeding 88.9 mm, and with a nominal wall thickness of 6.4516 mm. |
| 459 | 7306.29.00.77 | Steel | Tubing of heat-treated, welded carbon steel, premium or semi-premium, threaded and coupled to API 5CT specifications, of API grades N80, L80, or P110, of a length of no less than 7.6 meters but not exceeding 10.4 meters, of an external diameter exceeding 73 mm but not exceeding 88.9 mm, and with a nominal wall thickness of 6.4516 mm. |
| 460 | 7306.30.00 | Steel | Circular tubes, of non-alloy steel, electric resistance welded, of grade EDDS T1-25, of specification ASTM A787-09, of a nominal thickness of 0.065 inch, with an outer diameter of 3.000 inches, and of a length of 240 inches, plain-ended and unthreaded, with aluminized coating, not further worked |
| 461 | 7306.30.00 | Steel | Circular tubes, of non-alloy steel, electric resistance welded,of grade EDDS T1-25, of specification ASTM A787-09, of a thickness of 0.065 inch, with an outer diameter of 3.500 inches, and of a length of 240 inches, plain-ended, with aluminized coating, not further worked |
| 462 | 7306.30.00 | Steel | Circular tubes, of non-alloy steel, electric resistance welded, of grade EDDS T1-25, of specification ASTM A787-09, of a thickness of 0.058 inch, with an outer diameter of 4.000 inches, and of a length of 240 inches, plain-ended, with aluminized coating, not further worked |
| 463 | 7306.30.00 | Steel | Circular tubes, of non-alloy steel, electric resistance welded, of grade EDDS T1-25, of specification ASTM A787-09, of a thickness of 0.058 inch, with an outer diameter of 5.000 inches, and of a length of 240 inches, plain-ended, with aluminized coating, not further worked |
| 464 | 7306.30.00 | Steel | Circular tubes, of non-alloy steel, electric resistance welded, of grade EDDS T1-25, of specification ASTM A787-09. , of a thickness of 0.065 inch, with an outer diameter of 6.000 inches, and of a length of 240 inches, plain-ended, with aluminized coating, not further worked |
| 465 | 7306.30.00 | Steel | Welded tube, of circular cross-section, of grade SGLC400 alloy steel, with an outer diameter of 47.6 mm by 50.8 mm, with a wall thickness of 1.6mm, with a length of 980 mm, of a standard of ASME Y14.5-2009 tolerances, with a electrophoretic coating (E-Coat) |
| 466 | 7306.30.00 | Steel | Welded pipes, of carbon steel, of grade ASTM A500 Grade C, of specification ASTM A500, longitudinally submerged arc welded, with an outer diameter of 406.4 mm, and of a thickness of at least 15.875 mm but not exceeding 22.225 mm |
| 467 | 7306.30.00 | Steel | Welded pipes, of carbon steel, of grade C, of specification ASTM A500, longitudinally submerged arc welded, with an outer diameter of 406.4 mm, and of a wall thickness of at least 15.88 mm but not exceeding 22.23 mm with dimensions HSS 16X16X0.875, HSS 16X16X0.750 and HSS 16X16X0.625. |
| 468 | 7306.30.00 | Steel | Pipes, longitudinally submerged arc welded, of carbon steel, of grade C, of specification ASTM A500, with an outer diameter of 406.4 mm, and with a thickness of 19.05 mm |
| 469 | 7306.30.00.44 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of iron or non-alloy steel, of grade ASTM A135 Gr.A, ASTM A795 Gr. A, ASTM A53 Gr. A or ASTM A53 Gr.B, of specification 150 CS9, of an external diameter of at least 25.4 mm but not exceeding 60.325 mm |
| 470 | 7306.30.00.49 | Steel | Other tubes, pipes and hollow profiles, drawn over mandrel, of carbon steel, of grades AISI 1020/1026, of specification ASTM A513 Type 5 and/or ASTM A513 Type 6, electric resistance welded, stress relief annealed, with an outer diameter not exceeding 60.325 mm |
| 471 | 7306.30.00.49 | Steel | Other tubes, pipes and hollow profiles, drawn over mandrel, of carbon steel, of grade ST52, of specification ASTM A513 Type 5 and/or ASTM A513 Type 6, electric resistance welded, stress relief annealed, with an outer diameter not exceeding 60.325 mm |
| 472 | 7306.30.00.49 | Steel | Other tubes, pipes and hollow profiles, welded, of carbon steel, of specification ASTM A214 and SAE J525 |
| 473 | 7306.30.00.51 | Steel | Other structural tubing, welded, of circular cross-section, of iron or non-alloy steel, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification, of an external diameter of greater than 60.325 mm but not exceeding 168.28mm |
| 474 | 7306.30.00.54 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of iron or non-alloy steel, of grade ASTM A135 Gr.A, ASTM A795 Gr. A, ASTM A53 Gr. A or ASTM A53 Gr.B, of specification 150 CS9, of an external diameter greater than 60.325 mm but not exceeding 168.28 mm |
| 475 | 7306.30.00.59 | Steel | Other tubes, pipes and hollow profiles, drawn over mandrel, of carbon steel, of grades AISI 1020/1026, of specification ASTM A513 Type 5 and/or ASTM A513 Type 6, electric resistance welded, stress relief annealed, with an outer diameter of greater than 60.325 mm but not exceeding 168.28 mm |
| 476 | 7306.30.00.59 | Steel | Other tubes, pipes and hollow profiles, drawn over mandrel, of carbon steel, of grade ST52, of specification ASTM A513 Type 5 and/or ASTM A513 Type 6, electric resistance welded, and stress relief annealed, with an outer diameter of greater than 60.325 mm but not exceeding 168.28 mm |
| 477 | 7306.30.00.64 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of iron or non-alloy steel, of grade ASTM A135 Gr.A, ASTM A795 Gr. A, ASTM A53 Gr. A or ASTM A53 Gr.B, of specification 150 CS9, of an external diameter greater than 168.28 mm but not exceeding 254 |
| 478 | 7306.30.00.69 | Steel | Other tubes, pipes and hollow profiles, drawn over mandrel, of carbon steel, of grades AISI 1020/1026, of specification ASTM A513 Type 5 and/or ASTM A513 Type 6, electric resistance welded, stress relief annealed, with an outer diameter of greater than 168.28 mm but not exceeding 273.05 mm |
| 479 | 7306.30.00.69 | Steel | Other tubes, pipes and hollow profiles, drawn over mandrel, of carbon steel, of grade ST52, of specification ASTM A513 Type 5 and/or ASTM A513 Type 6, electric resistance welded, stress relief annealed, with an outer diameter of greater than 168.28 mm but not exceeding 273.05 mm |
| 480 | 7306.30.00.79 | Steel | Other tubes, pipes and hollow profiles, drawn over mandrel, of carbon steel, of grades AISI 1020/1026, of specification ASTM A513 Type 5 and/or ASTM A513 Type 6, electric resistance welded, stress relief annealed, with an outer diameter of greater than 273.05 mm but not exceeding 406.40 mm |
| 481 | 7306.30.00.79 | Steel | Other tubes, pipes and hollow profiles, drawn over mandrel, of carbon steel, of grade ST52, of specification ASTM A513 Type 5 and/or ASTM A513 Type 6, electric resistance welded, stress relief annealed, with an outer diameter of greater than 273.05 mm but not exceeding 406.40 mm |
| 482 | 7306.30.00.89 | Steel | Welded carbon steel ERW boiler tubes, of ASME specification - SA-178 Grade A, with internal extended heating surface (X-ID), with an outer diameter of 1.50 inches, 2.00 inches, or 2.50 inches, with a wall thickness of at least 0.095 inches but not exceeding 0.105 inches, with a length of at least 20 feet but not exceeding 26 feet, with a light oil coating. |
| 483 | 7306.30.00.89 | Steel | Welded carbon steel ERW boiler tubes, of ASME specification - SA-178 Grade A material, with outer diameters of 1.50 inches, 2.00 inches, or 2.50 inches, with a wall thickness of at least 0.095 inches but not exceeding 0.105 inches, with a length of at least 20 feet but not exceeding 26 feet, with a plain internal finish and a light oil coating. |
| 484 | 7306.40.00 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS1, of an external diameter of at least 12.7 mm but not exceeding 609.6 mm |
| 485 | 7306.40.00 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS2, of external diameter of at least 25.4mm but not exceeding 762mm |
| 486 | 7306.40.00 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel |
| 487 | 7306.40.00.10 | Steel | Tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS1, of an external diameter of at least 25 mm but not exceeding 25.3 mm |
| 488 | 7306.40.00.10 | Steel | Tubes, pipes and hollow profiles, of grade ASTM A312TP316L, of specification 150SS5, of an external diameter of at least 19.05 mm but not exceeding 25.30 mm |
| 489 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS1, of an external diameter of at least 12.7mm but not exceeding 25.3 mm |
| 490 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS5, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 491 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM B88, of specification 150SS14, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 492 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A269 and A213, of specification 3500SS1, of an external diameter of 12.7mm |
| 493 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS5, of an external diameter of at least 12.7mm but not exceeding 25.3 mm |
| 494 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS21, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 495 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790S32750, of specification 150SS707, of an external diameter of at least 12.7 mm but not exceeding 25.3mm |
| 496 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 300SS6, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 497 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A269 and A213, of specification 3500SS1, with an external diameter of 9.525mm |
| 498 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A269 TP316, of specification 6000SS716, of an external diameter of at least 19.05 mm but not exceeding 25.3 mm |
| 499 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASME SA 312 TP316, of specification V2500H2B, of an external diameter of at least 6.35 mm but not exceeding 25.3 mm |
| 500 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A269 TP316 or ASTM A213 TP316, of specification 3500SS1, of an external diameter of at least 6.35 mm but not exceeding 25.3 mm |
| 501 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification 150SS1, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 502 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification V150H1A, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 503 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification V150H2A, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 504 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS13, of an external diameter of at least 12.7mm but not exceeding 25.3 mm |
| 505 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS3, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 506 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS5, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 507 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS10, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 508 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A269 TP316, of specification 3000SS1, of an external diameter of at least 6.35mm but not exceeding 25.3 mm |
| 509 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L or 316L (½"-2") or ASTM A312 TP304L (2½"-24"), of specification 300SS1, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 510 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM 312 TP304L, of specification 150SS6, of an external diameter of at least 12.7 mm but not exceeding 25.3mm |
| 511 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification V300H2A, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 512 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304H or ASTM A312 TP316H, of specification 300SS7, of an external diameter of at least 12.7mm but not exceeding 25.3 mm |
| 513 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS21, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 514 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade A312 TP316L, of specification 150SS14, of an external diameter of at least 12.7 but not exceeding 25.3 mm |
| 515 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304 or 316 (.5 in-2in), of specification 300SS1, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 516 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASME SA 312 TP316, of specification V2500H2B, of an external diameter of at least 6.35 mm but not exceeding 25.3 mm |
| 517 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification 150SS1, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 518 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification V150H1A, of an external diameter of at least 12.7mm but not exceeding 25.3 mm |
| 519 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification V150H2A, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 520 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS3, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 521 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification 150SS2, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 522 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L or 316L (.5in-2in) or ASTM A312 TP304L (2.5in-24in), of specification 300SS1, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 523 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790 UNS S31803, of specification V300H3A, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 524 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790 UNS S31803, of specification V150H3A, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 525 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP 316L, of specification 150SS5, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 526 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP 316L, of specification V300H2A, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 527 | 7306.40.00.10 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade A312 TP 316L, of specification 150SS14, of an external diameter of at least 12.7 mm but not exceeding 25.3 mm |
| 528 | 7306.40.00.20 | Steel | Tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS1, of an external diameter exceeding 25.3mm but not exceeding 114.9 mm |
| 529 | 7306.40.00.20 | Steel | Tubes, pipes and hollow profiles, of grade ASTM A312TP316L, of specification 150SS5, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 530 | 7306.40.00.20 | Steel | Tubes, pipes and hollow profiles, of grade ASTM A312TP304L, of specification 300SS3, of an external diameter of 101.6 mm |
| 531 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS1, of an external diameter exceeding 25.3 mm but not exceeding 101.6mm |
| 532 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS5, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 533 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS6, of an external diameter of at least 38.1 mm but not exceeding 114.9 mm |
| 534 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS7, of an external diameter of at least 76.2 mm but not exceeding 114.9 mm |
| 535 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS8, of an external diameter of at least 25.4 mm but not exceeding 101.6mm |
| 536 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L and ASTM A312TP304L, of specification 150SS11, of an external diameter of at least 38.1 mm but not exceeding 114.9 mm |
| 537 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS12, of an external diameter of 101.6mm |
| 538 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS13, with an external diameter of 38.1mm |
| 539 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM B88, of specification 150SS14, of an external diameter exceeding 25.3mm but not exceeding 38.1 mm |
| 540 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS21, of an external diameter of at least 25.4 mm but not exceeding 50.8 mm |
| 541 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 300SS2, of an external diameter of at least 25.4mm but not exceeding 31.75mm |
| 542 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade of ASTM A312TP316L, of specification 600SS1, of an external diameter of at least 25.4mm but not exceeding 38.1mm |
| 543 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS5, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 544 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS6, with an external diameter of 38.1mm |
| 545 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS9, of an external diameter of at least 38.1mm but not exceeding 50.8mm |
| 546 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS13, with an external diameter of 50.8mm |
| 547 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM B88 and ASTM A312TP316L, of specification 150SS14, of an external diameter of at least 25.4mm but not exceeding 50.8mm |
| 548 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790GR S32205, of specification 150SS20, of an external diameter of at least 25.4 mm but not exceeding 114.9 mm |
| 549 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS21, of an external diameter of at least 25.3 mm but not exceeding 114.9 mm |
| 550 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790S32750, of specification 150SS707, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 551 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 300SS2, of an external diameter of at least 25.4 mm but not exceeding 114.9 mm |
| 552 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 300SS4, of an external diameter of at least 25.4mm but not exceeding 101.6mm |
| 553 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 300SS6, of an external diameter exceeding 25.3 mm but not exceeding 25.4 mm |
| 554 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A269 TP316, of specification 6000SS716, of an external diameter exceeding 25.3 mm but not exceeding 63.5 mm |
| 555 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASME SA 312 TP316, of specification V2500H2B, of an external diameter exceeding 25.3mm but not exceeding 25.4 mm |
| 556 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A269 TP316 or ASTM A213 TP316, of specification 3500SS1, of an external diameter of at least 25.3 mm but not exceeding 25.4 mm |
| 557 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification 150SS1, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 558 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification V150H1A, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 559 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification V150H2A, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 560 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS13, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 561 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS3, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 562 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS7, of an external diameter of at least 63.5 mm but not exceeding 114.9 mm |
| 563 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS5, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 564 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS10, of an external diameter exceeding 25.3 mm but not exceeding 50.8 mm |
| 565 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A269 TP316, of specification 3000SS1, of an external diameter exceeding 25.3 mm but not exceeding 50.8 mm |
| 566 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L or 316L (½"-2") or ASTM A312 TP304L (2½"-24"), of specification 300SS1, of an external diameter of exceeding 25.3 mm but not exceeding 114.9 mm |
| 567 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM 312 TP304L, of specification 150SS6, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 568 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification V300H2A, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 569 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304H or ASTM A312 TP316H, of specification 300SS7, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 570 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS21, of an external diameter exceeding 25.3 mm but not exceeding 114.9mm |
| 571 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade A312 TP316L, of specification 150SS14, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 572 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304 or 316 (.5 in-2in), of specification 300SS2, of an external diameter exceeding 25.3mm but not exceeding 50.8 mm |
| 573 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L (2.5in-24in), of an external diameter of at least 63.5mm but not exceeding 114.9 mm |
| 574 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASME SA 312 TP316, of specification V2500H2B, of an external diameter exceeding 25.3 but not exceeding 25.4 |
| 575 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification 150SS1, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 576 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification V150H1A, of an external diameter of at least 25.3 mm but not exceeding 114.9 mm |
| 577 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification V150H2A, of an external diameter of exceeding 25.3 mm but not exceeding 609.6 mm |
| 578 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS3, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 579 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification 150SS2, of an external diameter exceeding 25.3 mm but not exceeding 114. 9 mm |
| 580 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP 304L, of specification 150SS7, of an external diameter of at least 63.5 mm but not exceeding 114.9 mm |
| 581 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L or 316L (.5in-2in) or ASTM A312 TP304L (2.5in-24in), of specification 300SS1, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 582 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790 UNS S31803, of specification V300H3A, of an external diameter exceeding 25.3 mm but not exceeding 114. 9 mm |
| 583 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790 UNS S31803, of specification V150H3A, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 584 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP 316L, of specification 150SS5, of an external diameter exceeding 25.3 mm but not exceeding 101.6 mm |
| 585 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP 316L, of specification V300H2A, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 586 | 7306.40.00.20 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade A312 TP 316L, of specification 150SS14, of an external diameter exceeding 25.3 mm but not exceeding 114.9 mm |
| 587 | 7306.40.00.30 | Steel | Tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS1, of an external diameter exceeding 114.9 mm but not exceeding 203 mm |
| 588 | 7306.40.00.30 | Steel | Tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS2, of an external diameter of 305 mm |
| 589 | 7306.40.00.30 | Steel | Tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS3, of an external diameter of 304.8 mm |
| 590 | 7306.40.00.30 | Steel | Tubes, pipes and hollow profiles, of grade ASTM A312TP316L, of specification 150SS5, of an external diameter exceeding 114.9 mm but not exceeding 203.2 mm |
| 591 | 7306.40.00.30 | Steel | Tubes, pipes and hollow profiles, of grade ASTM A312TP304L, of specification 150SS6, of an external diameter of at least 203.2 mm but not exceeding 406.4 mm |
| 592 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS1, of an external diameter exceeding 114.9 mm |
| 593 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS5, of an external diameter exceeding 114.9 mm but not exceeding 762 mm |
| 594 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS6 of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 595 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS7, of an external diameter exceeding 114.9 mm but not exceeding 304.8 mm |
| 596 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS8, of an external diameter exceeding 114.9 mm |
| 597 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L and ASTM A312TP304L, of specification 150SS11, of an external diameter exceeding 114.9 mm but not exceeding 203.2 mm |
| 598 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS3, of an external diameter of at least 203.2mm but not exceeding 355.6mm |
| 599 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 150SS5, of an external diameter exceeding 114.9mm but not exceeding 355.6mm |
| 600 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS7, of an external diameter of at least 152.4mm but not exceeding 304.8mm |
| 601 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790GR S32205, of specification 150SS20, of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 602 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP304L, of specification 150SS21, of an external diameter exceeding 114.9 mm but not exceeding 254 mm |
| 603 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790S32750, of specification 150SS707, of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 604 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312TP316L, of specification 300SS2, of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 605 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification 150SS1, of an external diameter exceeding 114.9mm but not exceeding 254 mm |
| 606 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification V150H1A, of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 607 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification V150H2A, of an external diameter exceeding 114.9 mm but not exceeding 1524 mm |
| 608 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS13, of an external diameter exceeding 114.9 mm but not exceeding 914.4 mm |
| 609 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS3, of an external diameter exceeding 114.9 mm but not exceeding 914.4 mm |
| 610 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS7, of an external diameter of at least 114.9 mm but not exceeding 609.6 mm |
| 611 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS5, of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 612 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L or 316L (½"-2") or ASTM A312 TP304L (2½"-24"), of specification 300SS1, of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 613 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM 312 TP304L, of specification 150SS6, of an external diameter exceeding 114.9 mm but not exceeding 914.4 mm |
| 614 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification V300H2A, of an external diameter exceeding 114.9 mm but not exceeding 304.8 mm |
| 615 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304H or ASTM A312 TP316H, of specification 300SS7, of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 616 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS21, of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 617 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade A312 TP316L, of specification 150SS14, of an external diameter exceeding 114.9 mm but not exceeding 152.4 mm |
| 618 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L (2.5in-24in), of an external diameter exceeding 114.9 mm but not exceeding 609.6mm |
| 619 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification 150SS1, of an external diameter exceeding 114.9mm but not exceeding 254 mm |
| 620 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification V150H1A, of an external diameter of exceeding 114.9 mm but not exceeding 609.6 mm |
| 621 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification V150H2A, of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 622 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L, of specification 150SS3, of an external diameter exceeding 114.9 mm but not exceeding 914.4 mm |
| 623 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP316L, of specification 150SS2, of an external diameter exceeding 114.9 mm but not exceeding 1524 mm |
| 624 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP 304L, of specification 150SS7, of an external diameter exceeding 114.9 mm but not exceeding 609.6 mm |
| 625 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP304L or 316L (.5in-2in) or ASTM A312 TP304L (2.5in-24in), of specification 300SS1, of an external diameter exceeding 114.9mm but not exceeding 609.6 mm |
| 626 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790 UNS S31803, of specification V300H3A, of an external diameter exceeding 114.9 mm but not exceeding 762 mm |
| 627 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A790 UNS S31803, of specification V150H3A, of an external diameter exceeding 114.9 mm but not exceeding 762 mm |
| 628 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade ASTM A312 TP 316L, of specification V300H2A, of an external diameter exceeding 114.9 mm but not exceeding 304.8 mm |
| 629 | 7306.40.00.30 | Steel | Other tubes, pipes and hollow profiles, other, welded, of circular cross-section, of stainless steel, of grade A312 TP 316L, of specification 150SS14, of an external diameter exceeding 114.9 mm but not exceeding 152.4 mm |
| 630 | 7306.50.00.00 | Steel | Other alloy steel tubes and hollow profiles, of grade 15B27M, formed as tubular products, with an outer diameter of at least 20.0 mm but not exceeding 40.0 mm, with a wall thickness of at least 3.0 mm but not exceeding 7.7 mm, with a length of at least 1258.0 mm but not exceeding 7333.4 mm |
| 631 | 7306.50.00.00 | Steel | Other alloy steel tubes and hollow profiles, of grade 15B30M, formed as tubular products, with an outer diameter of 36.0 mm, with a wall thickness of 5.8 mm, with a length of 1514.0 mm |
| 632 | 7306.50.00.00 | Steel | Other alloy steel tubes and hollow profiles, of grade 15B30M, formed as tubular products, with an outer diameter of 28.0 mm, with a wall thickness of 4.6 mm, with a length of 1700.0 mm |
| 633 | 7306.50.00.00 | Steel | Other alloy steel tubes and hollow profiles, of grade 15B34, formed as tubular products, with an outer diameter of 33.0 mm, with a wall thickness of 5.2 mm, with a length of 7235.2 mm |
| 634 | 7306.50.00.00 | Steel | Other alloy steel tubes and hollow profiles, of grade 15B34, formed as tubular products, with an outer diameter of 32.0 mm, with a wall thickness of 5.2 mm, with a length of 7235.2 mm |
| 635 | 7306.50.00.00 | Steel | Steel tubing, seam welded, in coils of a length not exceeding 11,000 meters, whether or not heat-treated, with a specified minimum yield strength (SMYS) of at least 482 MPa, of an external diameter of at least 19.05mm but not exceeding 88.9mm, and a wall thickness of at least 2.03mm but not exceeding 7.62mm, whether or not including an integrally tapered wall thickness, for use in oil, gas, or geothermal exploration or production. |
| 636 | 7306.50.00.00 | Steel | Other tubes, pipes and hollow profiles, drawn over mandrel,of carbon steel, of grade AISI 4130, of specification ASTM A513 Type 5, electric resistance welded, stress relief annealed |
| 637 | 7306.61.00 | Steel | Welded tube, of square or rectangular cross-section, of grade SGLC400 alloy steel, with an outer diameter of 47.6 mm by 50.8 mm, with a wall thickness of 1.6mm, with a length of 980 mm, of a standard of ASME Y14.5-2009 tolerances, with a electrophoretic coating (E-Coat) |
| 638 | 7306.61.00 | Steel | Hollow structural sections, square or rectangular, of non-alloy steel, of grade C, of specification ASTM A500, cold-formed and welded, with a height of 12 inches, width of 12 inches, thickness of 0.750 inches. |
| 639 | 7306.61.00 | Steel | Hollow structural sections, square or rectangular, of non-alloy steel, of grade C, of specification ASTM A500, cold-formed and welded, with a heigh of 12 inches, width of 8 inches and thickness of 0.625 inches. |
| 640 | 7306.61.00 | Steel | Hollow structural sections, square or rectangular, of non-alloy steel, of grade C, of specification ASTM A500, cold-formed and welded with a height of 12 inches, width of 6 inches and thickness of 0.375 inches. |
| 641 | 7306.61.00 | Steel | Hollow structural sections, square or rectangular, of non-alloy steel, of grade C, of specification ASTM A500, cold-formed and welded, with a height of 10 inches, width of 10 inches and thickness of 0.625 inches |
| 642 | 7306.61.00 | Steel | Hollow structural sections, square or rectangular, of non-alloy steel, of grade C, of specification ASTM A500, cold-formed and welded, with a height of 12 inches, a width of 12 inches and a thickness of 0.750 inches. |
| 643 | 7306.61.00 | Steel | Hollow structural sections, rectangular, of non-alloy steel, of grade C, of specification ASTM A500, cold-formed and welded, with a height of 12 inches, width of 8 inches and thickness of 0.625 inches. |
| 644 | 7306.61.00 | Steel | Hollow structural sections, rectangular, non-alloy steel, of grade C, of specification ASTM A500, cold-formed and welded, with a height of 12 inches, width of 6 inches and thickness of 0.375 inches. |
| 645 | 7306.61.00 | Steel | Hollow structural sections, square, non-alloy steel, of grade C, of specification ASTM A500, cold-formed and welded, with a height of 10 inches, width of 10 inches and thickness of 0.625 inches. |
| 646 | 7306.61.00.39 | Steel | Steel structural tubing, hollow structural section, pre-processed into components for trailer manufacturing of height of at least 0.75 inch but not exceeding 8 inches, of width of at least 0.75 inch but not exceeding 4 inches and of wall thickness of at least 0.043 inches but not exceeding 0.25 inches, of length of at least 6.0 inches but not exceeding 240.0 inches, Grade of material is ASTM A500 GRADE B & C |
| 647 | 7306.61.00.49 | Steel | Other hollow tubes, of square cross-section, welded, of low-alloy weathering steel, cold formed, of specification ASTM A847, of dimensions 10 inches by 10 inches, of a wall thickness of 0.5 inches, welded, uncoated |
| 648 | 7306.61.00.49 | Steel | Other hollow tubes, of square cross-section, of low-alloy weathering steel, cold formed, of specification ASTM A847, of dimensions 8 inches by 8 inches, of a wall thickness of 0.5 inches, welded, uncoated |
| 649 | 7306.61.00.49 | Steel | Other hollow tubes, of square cross-section, of low-alloy weathering steel, cold formed, of specification ASTM A847, of dimensions 10 inches by 10 inches, of a wall thickness of 0.625 inches, uncoated, welded |
| 650 | 7306.61.00.49 | Steel | Other hollow tubes, of square cross-section, of low-alloy weathering steel, cold formed, of specification ASTM A847, of dimensions 10 inches by 10 inches, of a wall thickness of 0.375 inches, uncoated, welded |
| 651 | 7306.61.00.49 | Steel | Steel square hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 6 inches by 6 inches, with a wall thickness of 0.375 inches, with a length of 720 inches not exceeding 32 inches |
| 652 | 7306.61.00.49 | Steel | Steel square hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 5 inches by 5 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 653 | 7306.61.00.49 | Steel | Steel square hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, of specification ASTM A847, with an outer width of 3 inches by 3 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeidng 32 inches |
| 654 | 7306.61.00.49 | Steel | Steel rectangular hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 3 inches, with an outer height of 2 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 655 | 7306.61.00.49 | Steel | Steel square hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 4 inches and an outer height of 4 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 656 | 7306.61.00.49 | Steel | Steel rectangular hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 3 inches and an outer height of 2 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 657 | 7306.61.00.49 | Steel | Steel rectangular hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 3 inches and an outer height of 2 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 658 | 7306.61.00.49 | Steel | Steel rectangular hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 5 inches and an outer height of 3 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 659 | 7306.61.00.49 | Steel | Steel rectangular hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 3inches and an outer height of 2 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 660 | 7306.61.00.49 | Steel | Steel square hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 3 inches and an outer height of 3 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 661 | 7306.61.00.49 | Steel | Steel rectangular hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 6 inches and an outer height of 4 inches, with a wall thickness of 0.5 inches, with a length of 624 inches not exceeding 32 inches |
| 662 | 7306.61.00.49 | Steel | Steel square hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 3 inches and an outer height of 3 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 663 | 7306.61.00.49 | Steel | Steel square hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 8 inches and an outer height of 8 inches, with a wall thickness of 0.375 inches, with a length of 780 inches not exceeding 32 inches |
| 664 | 7306.61.00.49 | Steel | Steel square hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 4 inches and an outer height of 4 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 665 | 7306.61.00.49 | Steel | Steel rectangular hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 3 inches and an outer height of 2 inches, with a wall thickness of 0.25 inches, with a length of 576 inches not exceeding 32 inches |
| 666 | 7306.61.00.49 | Steel | Steel rectangular hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 3 inches and an outer height of 2 inches, with a wall thickness of 0.1875 inches, with a length of 576 inches not exceeding 32 inches |
| 667 | 7306.61.00.49 | Steel | Steel rectangular hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 6 inches and an outer height of 4 inches, with a wall thickness of 0.25 inches, with a length of 636 inches not exceeding 32 inches |
| 668 | 7306.61.00.49 | Steel | Steel square hollow section, formed and welded, of weathering non-alloy steel, hot rolled, of grade ASTM A847, with an outer width of 5 inches and an outer height of 5 inches, with a wall thickness of 0.25 inches, with a length of 600 inches not exceeding 32 inches |
| 669 | 7307.91.00 | Steel | Flanges, of forged iron or steel, of grades SA181-70 and SA105. |
| 670 | 7307.92.00 | Steel | Threaded elbows, bends and sleeves, of iron or steel, of grades SA181-70 and SA105. |
| 671 | 7307.93.00 | Steel | Butt welding fittings, of forged iron or steel, of grade SA181-70 and SA105. |
| 672 | 7307.93.00 or 7305.39.00.30 | Steel | Pipe bends, of carbon steel, of grade API 5L PSL2, of specification X65M, submerged arc welded longitudinal pipe, with angles of at least 3 degrees but not exceeding 90 degrees, with an external diameter of 30 inches, with a thickness of 0.5 inches, with lengths of at least 33 inches but not exceeding 283 inches, with a 1.25 inch nominal urethane lining, with pipe ends of various types (lap joint, slip-on raised face) |
| 673 | 7307.99.00 | Steel | Tube fittings of non-alloy steel, including of types Service fittings or Beadlock Hose fitting; service splicer, beadlock, pad, and refrigerant types; straight or angled (45° or 90 or/180°); sizes from #6 to #14; with or without service ports; for use in HVAC and refrigeration tube assemblies. |
| 674 | 7307.99.00 | Steel | Carbon steel split sleeve pipeline fittings, of grade SA A350 Grade LF2 Class 1 or SA A516 Grade 70 and of specification ASME Section VIII Division 2, fabricated as mechanically fastened two-piece semi-cylindrical steel sleeve assemblies incorporating internal steel grid ring elements and elastomer sealing components, with an overall length of at least 7.25 inches but not exceeding 92.0 inches and for nominal pipe diameters of at least 1.0 inch but not exceeding 60.0 inches, supplied with stud bolting of grade SA A193 Grade B7 and nuts of grade SA A194 Grade 2H, optionally with marine-grade epoxy coating, installation hinges, vent connections and sacrificial anodes. |
| 675 | 7307.99.00 | Steel | Tube or pipe fittings, of carbon steel, split sleeve, of grade SA A350 Grade LF2 Class 1 or SA A516 Grade 70, of specification ASME Section VIII Division 2, with a length of at least 184.15 mm but not exceeding 2,336.80 mm, with diameters of at least 25.40 mm but not exceeding 1,524.00 mm, supplied with stud bolting of grade SA A193 Grade B7 and nuts of grade SA A194 Grade 2H, and optionally with marine-grade epoxy coating, installation hinges, vent connections, and sacrificial anodes |
| 676 | 7308.10.00.00 | Steel | Galvanized carbon steel bridge deck panels of a grade suitable for structural decking, of a specification customer directed, roll formed from 7 gauge steel sheet and cut to length, with a width of 4.250 inches and with a length of 378.375 inches, and with a galvanized zinc coating. |
| 677 | 7308.40.00 | Steel | Steel wall brace systems for masonry construction, consisting of galvanized steel pipe braces and fittings supplied in lockable steel storage racks, with brace members fabricated from galvanized pipe with an outside diameter of 2.375 inches or 2.875 inches, with storage racks with a length of approximately 89 inches, with a width of approximately 43 inches, with a height of approximately 26 inches, galvanized. |
| 678 | 7308.40.00.00 | Steel | Renforts en acier pour murs en terre stabilisée mécaniquement, en acier galvanisé crénelé, de nuance 65, d'une largeur de 50mm, d'une épaisseur de 6mm, d'une longueur de 3,6m ou 5,2m |
| 679 | 7308.90.00 | Steel | Guardrail end-terminal systems, of galvanized steel, comprising W-beam guardrail sections of grade ASTM A653 and of specification AASHTO M 180, with base metal thicknesses of 0.105 inch and 0.135 inch and with a width of 18.875 inches, of a length of at least 162.5 inches but not exceeding 163 inches, with a zinc coating of 1.80 ounces per square foot in accordance with AASHTO M 180, incorporating a steel impact nose and steel hardware components and supplied with wooden posts and wooden blocks, tested to NCHRP Report 350 Test Level 3 |
| 680 | 7308.90.00 | Steel | Guardrail end-terminal systems, of galvanized steel, comprising W-beam guardrail sections of grade ASTM A653 and of specification AASHTO M 180, with base metal thicknesses of 0.105 inch and 0.135 inch and with a width of 18.875 inches, of a length of at least 21.75 inches but not exceeding 125 inches, with a zinc coating of 1.80 ounces per square foot in accordance with AASHTO M 180, incorporating a steel impact nose and steel hardware components and steel I-beam posts of grade ASTM A36 with a zinc coating of 1.70 ounces per square foot in accordance with ASTM A123, tested to MASH Test Level 3 |
| 681 | 7308.90.00 | Steel | End terminals for roadside guardrail systems, of steel, meeting NCHRP 350 test level 3 performance criteria, consisting of posts, release hardware and anchorage components |
| 682 | 7308.90.00 | Steel | High tension cable barrier systems, of steel and polymer, of a rating of 350 by the National Cooperative Highway Research Program (NCHRP) |
| 683 | 7308.90.00 | Steel | Steel temporary barrier systems, of a rating of 350 by the National Cooperative Highway Research Program (NCHRP) |
| 684 | 7308.90.00 | Steel | Crash terminals and crash cushions, of steel, wood, and polymer, of a rating by the Manual for Assessing Safety Hardware (MASH) by the American Association of State Highway and Transportation Officials (AASHTO) |
| 685 | 7308.90.00 | Steel | High tension cable barrier systems, of steel and polymer, of a rating by the Manual for Assessing Safety Hardware (MASH) by the American Association of State Highway and Transportation Officials (AASHTO) |
| 686 | 7308.90.00 | Steel | Steel temporary barrier systems, of a rating by the Manual for Assessing Safety Hardware (MASH) by the American Association of State Highway and Transportation Officials (AASHTO) |
| 687 | 7308.90.00 | Steel | Tangent, double-sided, re-directive/gating and energy absorbing attenuator/end terminal available, consisting of nose plates, side panels, cable assembly, tube sleeves, soil plate, wood posts, offset blocks, and slotted W-beam end panels, and hardware, of specification National Cooperative Highway Research Project (NCHRP) Report 350 Test Level 2 and Test Level 3 |
| 688 | 7308.90.00 | Steel | Steel fence panels, formed as continuous corral panels, consisting of horizontal round steel tubes and vertical solid steel rod braces welded into modular sections, with a length of 20 feet, with an overall height of approximately 4 feet, with five horizontal bars formed from 1.25 inch outside diameter, 14 gauge tubing, with vertical braces of approximately 0.75 inch diameter rod, with integral connectors of approximately 9.5 inches in length, uncoated. |
| 689 | 7308.90.00 | Steel | Structural steel foundation retrofit brackets, fabricated as welded assemblies from carbon steel plate, of grade ASTM A572 Grade 50 and of specification ASTM A572, with a thickness of 0.25 inch, 0.3125 inch and 0.375 inch, incorporating precision-located bolt holes and bearing surfaces, and with no surface coating or with hot-dip galvanizing in accordance with ASTM A123 |
| 690 | 7308.90.00 | Steel | Round structural steel tubing, welded, of grade ASTM A500 Grade C and of specification ASTM A500, produced as straight seam welded tubing, with an outer diameter of 2.875 inches, with a wall thickness of 0.165 inches and with a length of 36 inches, with triple in-line galvanizing applied in accordance with ICC-ES AC406 |
| 691 | 7308.90.00 | Steel | Internal steel couplers, welded, fabricated from round structural steel tubing, of grade ASTM A500 Grade B and of specification ASTM A500, with an outer diameter of 2.5 inches, with a wall thickness of 0.125 inches and with a length of 6 inches |
| 692 | 7308.90.00 | Steel | External structural steel sleeves, welded, fabricated from round structural steel tubing, of grade ASTM A500 Grade B or Grade C and of specification ASTM A500, with a trumpet-style flared end, with an outer diameter of 3.5 inches, with a wall thickness of 0.216 inches and with a length of 30 inches or 48 inches |
| 693 | 7308.90.00 | Steel | Structural steel plate brackets, fabricated as welded assemblies from flat carbon steel plate, of grade ASTM A36 and of specification ASTM A36, with a thickness of 0.25 inch and with a square plan dimension of 4.5 inches by 4.5 inches, fitted with a concentrically welded cylindrical confining ring fabricated from CDS or DOM steel tubing, with an outer diameter of 1.5 inches, with a wall thickness of 0.25 inch and with a length of 1.38 inches |
| 694 | 7308.90.00 | Steel | Bent structural steel C-brackets, fabricated as welded assemblies from carbon steel plate, of grade ASTM A36 and of specification ASTM A36, with a plate thickness of 0.1875 inch, with overall bracket dimensions of 3.0 inches by 6.0 inches, fitted with a concentrically welded confining ring fabricated from CDS or DOM steel tubing, with an outer diameter of 1.5 inches, with a wall thickness of 0.25 inch and with a length of 1.38 inches |
| 695 | 7308.90.00 | Steel | Structural steel beam splice bracket assemblies, fabricated as welded assemblies from carbon steel plate and CDS or DOM steel tubing, of grade ASTM A36 and of specification ASTM A36, consisting of two flat plates with a thickness of 0.375 inch and with plate dimensions of 4.5 inches by 5.0 inches, fitted with a concentrically welded confining ring with an outer diameter of 1.5 inches, with a wall thickness of 0.25 inch and with a length of 1.38 inches, supplied with four bolts with a diameter of 0.5 inch and with a length of 5.5 inches with corresponding nuts |
| 696 | 7308.90.00 | Steel | Threaded rods, of steel, of grade ASTM F1554 Grade 55, of specification ASTM F1554, with welded heavy hex nut, with a diameter of 1 inch, with a length of 8 inches |
| 697 | 7308.90.00 | Steel | Machined structural steel threaded post caps, fabricated as precision-machined components with internal threads, of grade ASTM A108 Grade 1018 and of specification ASTM A108, with an outer diameter of 3.0 inches and with a thickness of 1.0 inch |
| 698 | 7308.90.00 | Steel | Round structural steel tubing, welded, of grade ASTM A500 Grade C and of specification ASTM A500, produced as straight seam welded tubing, with an outer diameter of 2.88 inches, with a wall thickness of 0.165 inches and with a length of 36 inches, 60 inches or 84 inches, with triple in-line galvanizing and with an internal zinc-rich coating |
| 699 | 7308.90.00 | Steel | Structural steel bottom plate assemblies, fabricated as welded assemblies from flat carbon steel plate and hollow structural steel tubing, of grade ASTM A36 for the plate and of grade ASTM A500 Grade B for the tubing and of specifications ASTM A36 and ASTM A500, with a plate thickness of 0.25 inch and with square plan dimensions of 3.5 inches by 3.5 inches, fitted with a welded HSS section with cross-sectional dimensions of 2.0 inches by 2.0 inches, with a wall thickness of 0.25 inch and with a length of 0.75 inch |
| 700 | 7308.90.00 | Steel | Structural steel base plate assemblies, fabricated as welded assemblies from carbon steel plate and steel pipe, of grade ASTM A36 for the bearing and capture plates and of grade ASTM A513 Type 5 or ASTM A53 Grade B for the pipe section and of specifications ASTM A36, ASTM A513 and ASTM A53, with a pipe outer diameter of at least 2.75 inches but not exceeding 3.38 inches, with a wall thickness of at least 0.156 inches but not exceeding 0.188 inches and with a pipe length of 4.0 inches, with electrozinc plating in accordance with ASTM B633 |
| 701 | 7308.90.00 | Steel | Adjustable structural steel bridge bracket assemblies, fabricated as bent and drilled plate assemblies with telescoping components, of grade ASTM A572 Grade 50 and of specification ASTM A572, with an adjustable overall length of at least 13.5 inches but not exceeding 16.5 inches, incorporating a bent beam capture plate of grade ASTM A36 with a length of 2.5 inches, supplied with four bolts with a diameter of 0.75 inch and with a length of 3.0 inches of grade ASTM A307 and with one bolt with a diameter of 1.0 inch and with a length of 5.0 inches of grade ASTM A307, with electrozinc plating in accordance with ASTM B633 |
| 702 | 7308.90.00 | Steel | Structural steel lever bracket and runner assemblies, fabricated as bent and drilled plate components, of grade ASTM A572 Grade 50 and of specification ASTM A572, including a lever bracket formed from carbon steel plate with a thickness of 0.3125 inch and incorporating an integrated welded nut with a diameter of 1.0 inch, and a runner strap formed from carbon steel plate with a width of 3.0 inches and with a length of 60.0 inches, incorporating a bent beam capture plate of grade ASTM A36 with a length of 2.5 inches, supplied with one bolt with a diameter of 0.75 inch and with a length of 5.0 inches of grade SAE Grade 5 with nut and with one bolt with a diameter of 1.0 inch and with a length of 9.0 inches of grade ASTM A307, supplied with wood screws with a diameter of #10 and with a length of 2.0 inches, with electrozinc plating in accordance with ASTM B633 |
| 703 | 7308.90.00 | Steel | Structural steel bottom bracket assemblies, fabricated as bent plate assemblies from carbon steel plate formed into an L-shaped profile, of grade ASTM A572 Grade 50 and of specification ASTM A572, with a plate thickness of 0.25 inch, with leg dimensions of 1.56 inches and 1.5 inches and with a length of 4.88 inches, supplied with two concrete screw anchors with a diameter of 0.5 inch and with a length of 3.0 inches, with electrozinc plating in accordance with ASTM B633 |
| 704 | 7308.90.00 | Steel | Hydraulic lift cylinder assemblies, linear acting, for structural foundation stabilization, with a cylinder body having an outer diameter of approximately 3.5 inches and with a stroke of approximately 4.0 inches, rated for operating pressures not exceeding 8,000 psi, supplied as assemblies incorporating structural steel top plates of grade ASTM A572 Grade 50 and of specification ASTM A572 with a thickness of 1.25 inches, high-strength threaded coil rods and couplers, hydraulic hose assemblies with permanently attached couplers, hydraulic fittings, manual control valves and zinc-coated steel fasteners |
| 705 | 7308.90.00 | Steel | Fabricated iron or steel structures and parts of structures, namely overhead sign support structures (gantries/cantilevers), security fencing structures, pedestrian pathway railing structures, and inspection access platform structures. |
| 706 | 7308.90.00.60 | Steel | Highway crash terminals and crash cushions, of steel, wood, and polymer, of a rating of 350 by the National Cooperative Highway Research Program (NCHRP) |
| 707 | 7308.90.00.60 | Steel | Truck and trailer mounted attenuators (TMAs), of steel and polymer, of a rating of 350 by the National Cooperative Highway Research Program (NCHRP) |
| 708 | 7308.90.00.70 | Steel | Steel racks, steel girders to support piping |
| 709 | 7308.90.00.99 | Construction | Galvannealed steel, embossed panels for doors of gauges 18 or 20; of width of at least 36.5 inches but not exceeding 40.50inches and of length of at least 79.13 inches but not exceeding 83.13 inches. |
| 710 | 7308.90.00.99 | Steel | Redirective, non-gating crash cushion assemblies, consisting of modular frameworks of steel beam panels and diaphragms enclosing crushable energy-absorbing cartridges and a self-supporting metal nose, of specification National Cooperative Highway Research Program (NCHRP) Report 350 |
| 711 | 7308.90.00.99 | Steel | Redirective, non-gating crash cushion assemblies, consisting of modular frameworks of steel beam panels and diaphragms and a self-supporting metal nose enclosing crushable energy-absorbing cartridges along a monorail assembly, of specification AASHTO Manual for Assessing Safety Hardware (MASH) Test Level 2 and Test Level 3, with a width of 24 inches or 69 inches |
| 712 | 7308.90.00.99 | Steel | Redirective, non-gating crash cushion assemblies, consisting of modular frameworks of energy-absorbing side panels and diaphragms, of specification AASHTO Manual for Assessing Safety Hardware (MASH) Test Level 3 |
| 713 | 7308.90.00.99 | Steel | Redirective, non-gating crash cushion assemblies, consisting of sliding fender panels, crossties, energy-absorbing rip plates and plastic noses, of specification National Cooperative Highway Research Program (NCHRP) Report 350 Test Level 2 and Test Level 3, with a width of at least 24 inches but not exceeding 71 inches |
| 714 | 7308.90.00.99 | Steel | Redirective, non-gating crash cushion assemblies, consisting of thrie-beam slider panels, bulkheads, plastic noses and backstops enclosing energy-absorbing cartridges, of specification National Cooperative Highway Research Program (NCHRP) Report 350 Test Level 2 and Test Level 3, with a width of at least 30 inches but not exceeding 102 inches |
| 715 | 7308.90.00.99 | Steel | Redirective, non-gating crash cushion assemblies, consisting of thrie-beam slider panels, bulkheads, steel noses and backstops enclosing single-stage energy-absorbing cartridges, of specification AASHTO Manual for Assessing Safety Hardware (MASH) Test Level 3, with a width of 30 inches or 72 inches |
| 716 | 7308.90.00.99 | Steel | Redirective, non-gating crash cushion assemblies, consisting of thrie-beam slider panels, bulkheads, plastic noses and backstops enclosing hyperelastic polyurethane energy-absorbing modules, of specification National Cooperative Highway Research Program (NCHRP) Report 350 Test Level 1, Test Level 2 and Test Level 3, with a width of at least 30 inches |
| 717 | 7308.90.00.99 | Steel | Tangent, single-sided, energy-absorbing, re-directive, and gating end terminal system for W-beam guardrail systems, consisting of impact head, anchor rail, anchor posts, yielding terminal posts, and hardware, of specification AASHTO Manual for Assessing Safety Hardware (MASH) Test Level 1, Test Level 2 and Test Level 3 |
| 718 | 7308.90.00.99 | Steel | Flared, single-sided, redirective/gating and energy-absorbing guardrail end terminal for use with W-beam guardrail systems, consisting of impact head, posts, spacer blocks, transition panel, ground strut, cable assembly, soil plate, fasteners and hardware, of specification AASHTO Manual for Assessing Safety Hardware (MASH) Test Level 1, Test Level 2 and Test Level 3 |
| 719 | 7308.90.00.99 | Steel | Tangent, double-sided, redirective/gating and energy-absorbing attenuator/end terminal, consisting of impact head, cable release post, angle strut, yielding terminal posts, system posts, composite offset blocks, slotted w-beam guardrail panels, fasteners and hardware, of specification AASHTO Manual for Assessing Safety Hardware (MASH), Test Level 1, Test Level 2 and Test Level 3 |
| 720 | 7308.90.00.99 | Steel | Tangent, single-sided, energy-absorbing, re-directive, and gating end terminal system for W-beam guardrail systems, consisting of impact head, yielding terminal posts, ground strut, cable anchor, and hardware, of specification National Cooperative Highway Research Project (NCHRP) Report 350 Test Level 2 and Test Level 3 |
| 721 | 7308.90.00.99 | Steel | Flared, single-sided, re-directive, and gating end terminal system for W-beam guardrail systems, consisting of impact head, breakaway posts, steel or wood guardrail posts, ground strut, cable anchor, and hardware, of specification National Cooperative Highway Research Project (NCHRP) Report 350 Test Level 2 and Test Level 3 |
| 722 | 7308.90.00.99 | Steel | Flared, single-sided, energy-absorbing, re-directive, and gating end terminal system for W-beam guardrail systems, consisting of impact head, slotted w-beam end rail, steel or wood guardrail posts, post tubes, ground strut, cable anchor, and hardware, of specification National Cooperative Highway Research Project (NCHRP) Report 350 Test Level 2 and Test Level 3 standards |
| 723 | 7308.90.00.99 | Steel | Flared, single-sided, energy-absorbing, re-directive, and gating end terminal system for W-beam guardrail systems, consisting of impact head, anchor rail, wteel guardrail posts, post tubes, ground strut, cable anchor, and hardware, of specification AASHTO Manual for Assessing Safety Hardware (MASH) Test Level 2 and Test Level 3 |
| 724 | 7308.90.00.99 | Steel | Tangent, single-sided, energy-absorbing, re-directive, and gating end terminal system for W-beam guardrail systems, consisting of impact head, yielding terminal posts, guardrail posts, ground strut, cable anchor, and hardware, of specification AASHTO Manual for Assessing Safety Hardware (MASH) Test Level 2 and Test Level 3 |
| 725 | 7308.90.00.99 | Steel | High tension cable barrier systems, consisting of four 0.75 inch high tension steel cables with turnbuckles, cable wedges, one stud and one heavy hex nut, driven sleeves, line posts, spacers and steel straps, of specification National Cooperative Highway Research Program (NCHRP) Test Level 3 for 6.1 m post spacing on 4:1 or flatter slopes and Test Level 4 for 6.1 m post spacing on 6:1 or flatter slopes |
| 726 | 7308.90.00.99 | Steel | High tension cable barrier terminals, consisting of cable release posts, 12-hole cable release posts, 20-hole cable release posts, upper posts, lower posts, cable brackets, cable anchors, lock bolts and hardware, of specification National Cooperative Highway Research Program (NCHRP) Test Level 3 for 6.1 m post spacing on 4:1 or flatter slopes and Test Level 4 for 6.1 m post spacing on 6:1 or flatter slopes |
| 727 | 7308.90.00.99 | Steel | Insulated steel panels, of grade 37, 22, 24, and 26 GA, of specification G-90 compliant with ASTM A653/A653M-11 CS Type B, formed as fire-rated metal panels containing mineral fiber insulation of a density of at least 125 kg/m³, with a width of 1067 mm or 1181 mm, with a thickness of 101.6 mm, 152.4 mm or 203 mm |
| 728 | 7308.90.00.99 | Steel | Anneau en acier, conformément aux normes DIN EN 10025-3, de nuance S355NL-Z25 ou S420NL-Z25, d'un diamètre extérieur d'au moins 3 268 mm mais n'excédant pas 4 750 mm, avec un diamètre intérieur d’au moins 3 088 mm mais n'excédant pas 3 927,5 mm, avec une épaisseur d’au moins 107 mm mais n'excédant pas 432 mm. |
| 729 | 7310.29.00 | Steel | Carbon steel tight-head steel drums, of UN specification UN1A1/X1.5/250 for 1.0 gallon capacity and UN1A1/X1.3/350 for 5.0 gallon capacity, fabricated from sheet steel with a body thickness equivalent to 26 gauge and with a bottom thickness equivalent to 24 gauge and with a top thickness equivalent to 24 gauge, formed with welded D-handles and stackable and nestable construction, with an interior double lining of epoxy phenolic coating, incorporating steel closure systems consisting for the 1.0 gallon drum of a 0.75 inch hexagonal steel plug with Buna rubber gasket and for the 5.0 gallon drum of a 2.0 inch hexagonal steel pour plug with Buna rubber gasket and a 0.75 inch hexagonal steel vent plug with Buna rubber gasket, with zinc plated steel closures with trivalent passivation and epoxy phenolic coating applied to the closures and with an epoxy phenolic interior lining. |
| 730 | 7312.10.00 | Steel | Mechanical push pull control cables, of steel, with threaded terminal end fittings |
| 731 | 7317.00.00.00 | Steel | Steel nails, ring shank, hot-dip galvanized, of a length of 1.5 inches, with a head diameter of 0.375 inches, with a pullout resistance of not less than 178 pounds per square foot in 0.5 inch plywood |
| 732 | 7317.00.00.00 | Steel | Steel track Spikes (cut spikes), of square cross-section of 0.63 inch and of length of 6 inches; spike head of thickness 0.31inches by 0.31 inches by 0.69 inches; meet AREMA Chapter 5, Section 2.1.3 requirements. |
| 733 | 7318.15.00 | Steel | Boulons de rail, en acier au carbone à haute résistance, de type boulon grade 5 à tête bombée et collet ovale, d’un diamètre nominal de 1,125 pouce et d’une longueur de 6 pouces mesurée sous tête, avec filetage roulé de type UNC, conformes aux exigences de l’AREMA |
| 734 | 7318.15.00 | Steel | Écrous carrés en acier au carbone à haute résistance, avec filetage interne roulé de type UNC, de type écrou grade 5 conforme aux exigences de l'AREMA, d’une épaisseur d’au moins 1.079 pouces mais ne dépassant pas 1.155 pouces, avec une largeur sur plats d’au moins 1.756 pouces mais ne dépassant pas 1.812 pouces, avec une largeur sur coins d’au moins 2.411 pouces mais ne dépassant pas 2.563 pouces. |
| 735 | 7318.15.00 | Steel | Boulons de rail en acier au carbone à haute résistance, de type grade 5, conforme aux exigences de l'AREMA, d’un diamètre nominal de 1.000 pouce, d’une longueur d’au moins 5.250 pouces mais ne dépassant pas 6.000 pouces, mesurée sous tête, avec un diamètre de tête de 1.6875 pouces, avec un collet ovale d’une longueur de 1.375 pouces, avec filetage de 1.000 pouce. |
| 736 | 7318.15.00 | Steel | Écrous carrés en acier au carbone à haute résistance, avec filetage interne roulé de type UNC, de type grade 5, conforme aux exigences de l'AREMA, d'une épaisseur d’au moins 24,282 mm mais ne dépassant pas 26,111 mm, avec une largeur sur plats d’au moins 40,005 mm mais ne dépassant pas 41,275 mm, avec une largeur sur coins d’au moins 54,915 mm mais ne dépassant pas 58,369 mm. |
| 737 | 7318.15.00 | Steel | Flush head clinch studs, of zinc-plated steel. |
| 738 | 7318.15.00.42 | Steel | Steel or iron alloy hexagon and double hexagon bolts of grades AMS5731 and AMS5732, with a length of at least 0.5 inch but not exceeding 2.625 inches and with a diameter of at least 0.18 inch but not exceeding 0.32 inch. |
| 739 | 7318.15.00.49 | Steel | U-bolts, of carbon steel, formed and threaded, of Unified National Coarse thread specification 0.75 inch-10 UNC, with matching hardened washers and nuts, zinc plated |
| 740 | 7318.15.00.49 | Steel | Bolts, of carbon steel, cold formed and threaded, with a thread size of M6, with a length of 20 mm |
| 741 | 7318.15.00.49 | Steel | Hex bolts, of carbon steel, of a grade ASTM F3125 Grade A325, cold formed, threaded, with a nominal diameter of 1.00 inch and with a length of 6.50 inches, with hot dip galvanizing |
| 742 | 7318.15.00.49 | Steel | Heavy hex structural bolts, of carbon steel,cold formed and threaded, conforming to ASTM F3125 Grade A325, with a nominal diameter of 1.00 inch, with a length of 9.50 inches, supplied with hot-dip galvanized corrosion-resistant coating |
| 743 | 7318.15.00.49 | Steel | Slotted round head bolts, of carbon steel, conforming to ASTM A307 Grade A, with a nominal diameter of 0.75 inches, with a length of 6 inchs, with a machine thread of 3 inches, with a hot-dip galvanized corrosion-resistant coating |
| 744 | 7318.16.00 | Steel | Steel hex nuts and locknuts, male or female thread, used with tube fittings; thread sizes (Unified National Fine - UNF) of at least 5/8 inches but not exceeding 18 inches, of at least 7/8 inches but not exceeding 18 inches, and of at least 1 1/16 inches, but not exceeding 14 inches; may include adapter type MIO-8 #8. |
| 745 | 7318.16.00 | Steel | Clinch nuts, of zinc-plated steel. |
| 746 | 7318.16.00.90 | Steel | Carbon steel nuts, of grade SAE J403 1050 to 1065, of specification GMW3359 Type A, formed as multithread U-nuts with prevailing torque, with an internal thread size of M8 size with a pitch of 1.25 mm, with a length of X, with a metallic base coat and with a black metallic lubricated topcoat. |
| 747 | 7318.16.00.90 | Steel | Carbon steel nuts, of grade SAE J403 1050 to 1065, of specification GMW3359 Type A, formed as prevailing torque U-nuts, with an internal thread size M4.2 with a pitch of 1.41 mm, with a length of at least 16.80 mm but not exceeding 25.00 mm. |
| 748 | 7318.16.00.90 | Steel | Carbon steel nuts, of grade SAE J403 1005, 1050 or 1065, formed as multithread U-nuts, with an internal thread size of M8 with a pitch of 1.25 mm, with a length of 25.00 mm, with a metallic base coat and with a silver metallic topcoat. |
| 749 | 7318.16.00.90 | Steel | Threaded rods, of alloy steel, of grade ASTM A193 Grade B7, of specification ASTM A193, supplied as all-thread rods with corresponding nuts and washers, with a diameter of 0.75 inch and with a length of 16 inches, with electrozinc plating in accordance with ASTM B633 |
| 750 | 7318.19.00 | Steel | Blind clinch standoffs, of zinc-plated steel. |
| 751 | 7318.19.00.00 | Steel | Structural steel spanner nuts, with an outer diameter of at least 9.0 inches but not exceeding 17 inches. |
| 752 | 7318.21.00.00 | Steel | Rondelles de blocage à ressort en acier au carbone de qualité ferroviaire à haute résistance conforme à l'AREMA, avec un diamètre intérieur d’au moins 30 mm et ne dépassant pas 32 mm, avec un diamètre extérieur d’au moins 59 mm et ne dépassant pas 65 mm, et une épaisseur nominale de 3,6 mm à 4,6 mm, présentant une géométrie hélicoïdale ouverte, conçues pour être utilisées avec des boulons de rail d’un diamètre nominal de 29 mm. |
| 753 | 7318.21.00.00 | Steel | Rondelles de blocage de type ressort en acier au carbone, conforme aux exigences de l’AREMA, avec un diamètre intérieur d’au moins 1,0625 pouce mais n’excédant pas 1,125 pouce, avec un diamètre extérieur d’au moins 2,000 pouces mais n’excédant pas 2,0625 pouces. |
| 754 | 7318.22.00.00 | Steel | Steel washers of grades UNS S30400, BS 2S 203,DTD 189 A,MSRR 1449 EN58B. With an outer diameter of at least 0.3 inch but not exceeding 1.5 inches. |
| 755 | 7318.22.00.00 | Steel | Washers of carbon steel, flat, not further worked than stamped, sized for No. 10 fasteners, coated. |
| 756 | 7318.23.00.00 | Steel | Stainless steel rivets of varying grades and of specifications ASTM A286 and ASTM A580, with a length of at least 0.1 inch but not exceeding 0.5 inch, and with a diameter of at least 0.09 inch but not exceeding 0.125 inch. |
| 757 | 7318.24.00.00 | Steel | Cotter pins of carbon steel, not further worked than formed, with a diameter of 0.125 inches and with a length of 2.00 inches, and with zinc plating. |
| 758 | 7318.29.00.00 | Steel | Stainless steel fasteners of grade A286, with a length of at least 0.5 inch but not exceeding 0.6 inch and with a diameter of at least 0.45 inch but not exceeding 0.7 inch, and with silver coating. |
| 759 | 7318.29.00.00 | Steel | Stainless steel thread inserts, with a length of at least 0.25 inch but not exceeding 1.65 inches and with silver coating and of grade AMS7245 and of a specification DTD 734 and of a specification BS 2874 and of grade AMS5737 and of grade AISI 303. |
| 760 | 7318.29.00.00 | Steel | Steel alloy pins of specification MSRR6522, MSRR6531, with a length of at least 0.5 inch but not exceeding 2 inches and with or without hardcoating of specification MSRR9507/304 on some items. |
| 761 | 7318.29.00.00 | Steel | Steel clips, of grade AMS5643, with a length of at least 1.5 inches but not exceeding 4 inches. |
| 762 | 7318.29.00.00 | Steel | Steel pins and dowels, of grade AISI 304, with a length of at least 1.0 inch but not exceeding 4.625 inches. |
| 763 | 7318.29.00.00 | Steel | Stainless steel lock rings, with an outer diameter of 0.875 inch. |
| 764 | 7318.29.00.00 | Steel | Carbon steel spring pins, of hardened carbon steel, formed as coiled cylindrical hollow pins of spiral construction, with a diameter of at least 0.8 mm but not exceeding 20 mm |
| 765 | 7318.29.00.00 | Steel | Stainless steel spring pins, of stainless steel, formed as coiled cylindrical hollow pins of spiral construction, with a diameter of at least 0.8 mm but not exceeding 20 mm |
| 766 | 7318.29.00.00 | Steel | Carbon steel spring pins, of high-carbon steel, formed as slotted cylindrical hollow pins, with a diameter of at least 1.5 mm but not exceeding 12 mm |
| 767 | 7318.29.00.00 | Steel | Stainless steel spring pins, of austenitic or martensitic stainless steel, formed as slotted cylindrical hollow pins, with a diameter of at least 1.5 mm but not exceeding 12 mm |
| 768 | 7318.29.00.00 | Steel | Carbon steel pins, of carbon steel, formed as straight solid cylindrical pins, with a diameter of at least 1.5 mm but not exceeding 6.5 mm. |
| 769 | 7318.29.00.00 | Steel | Stainless steel pins, of stainless steel, formed as straight solid cylindrical pins, with a diameter of at least 1.5 mm but not exceeding 6.5 mm. |
| 770 | 7318.29.00.00 | Steel | Retaining clips of carbon steel, hitch pin type, not further worked than formed. |
| 771 | 7318.29.00.00 | Steel | Retaining clips of carbon steel, hinge type, not further worked than formed, sized for a diameter of 0.3125 inches. |
| 772 | 7318.29.90 | Steel | Carbon steel washers, shims and spacers, of carbon steel, formed as flat or laminated washers and thin spacers, heat-treated or edge-bonded, with a thickness of at least 0.05 mm and with an outer diameter not exceeding 500 mm. |
| 773 | 7318.29.90 | Steel | Stainless steel washers, shims and spacers, of stainless steel, formed as flat or laminated washers and thin spacers, heat-treated or edge-bonded, with a thickness of at least 0.05 mm and with an outer diameter not exceeding 500 mm. |
| 774 | 7320.90.00 | Steel | Carbon steel disc springs, of carbon steel, formed as conical circular spring washers, with a thickness of at least 0.2 mm but not exceeding 3.5 mm, with a diameter of at least 1.5 mm but not exceeding 180 mm. |
| 775 | 7320.90.00 | Steel | Stainless steel disc springs, of stainless steel, formed as conical circular spring washers, with a thickness of at least 0.4 mm but not exceeding 3 mm, with an outside diameter of at least 1.5 mm but not exceeding 71 mm. |
| 776 | 7322.19.00 | Steel | Steel furnace bodies and combustion chamber components used in waste-oil heating units. Constructed from welded or formed carbon-steel panels with openings for fuel delivery, air intake, exhaust, and electrical connections. Includes internal brackets and mounting points for burner and control assemblies. Approximate unit dimensions: 2115 mm (L) × 750 mm (W) × 743 mm (H). Approximate weight: 145 kg. Imported as semi-finished structural components requiring further mechanical assembly, wiring, and testing. |
| 777 | 7322.90.10 | Steel | Individual steel parts and fittings for furnace assembly, including pipe fittings, threaded connectors, air supply adapters, mounting brackets, and control housing. Made from coated carbon steel, produced by casting, machining, or forming. Typical sizes of a length from 2 inches but not exceeding 24 inches. Imported as standalone components for incorporation into complete furnace systems. |
| 778 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of at least 24,000 BTU/h but not exceeding 59,000 BTU/h, with an output of at least 24,000 BTU/h but not exceeding 59,000 BTU/h, with a height of 88.9 cm, with a width of 44.45 cm, with a length of 74.93 cm |
| 779 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas or liquid propane fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of 25,000 BTU/h, with an output of 26,000 BTU/h, with a height of 88.9 cm, with a width of 36.06 cm, with a length of 74.93 cm |
| 780 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of at least 26,000 BTU/h but not exceeding 40,000 BTU/h, with an output of at least 24,000 BTU/h but not exceeding 59,000 BTU/h, with a height of 96.52 cm, with a width of 48.26 cm, with a length of 78.74 cm |
| 781 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of at least 26,000 BTU/h but not exceeding 40,000 BTU/h, with an output of at least 25,000 BTU/h but not exceeding 39,000 BTU/h, with a height of 88.9 cm, with a width of 37.59 cm, with a length of 74.93 cm |
| 782 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas or liquid propane fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of at least 26,000 BTU/h but not exceeding 80,000 BTU/h, with an output of at least 26,000 BTU/h but not exceeding 78,000 BTU/h, with a height of 88.9 cm, with a width of 62.2 cm, with a length of 74.9 cm |
| 783 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of at least 26,000 BTU/h but not exceeding 40,000 BTU/h, with an output of at least 25,000 BTU/h but not exceeding 39,000 BTU/h, with a height of 88.9 cm, with a width of 36.0 cm, with a length of 74.9 cm |
| 784 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of at least 60,000 BTU/h but not exceeding 120,000 BTU/h, with an output of at least 25,000 BTU/h but not exceeding 39,000 BTU/h, with a height of 88.9 cm, with a width of 44.4 cm, with a length of 74.9 cm |
| 785 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of 40,000 BTU/h, with an output of 39,000 BTU/h, with a height of 88.9 cm, with a width of 36.0 cm, with a length of 74.9 cm |
| 786 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas or liquid propane fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of at least 24,000 BTU/h but not exceeding 60,000 BTU/h, with an output of at least 24,000 BTU/h but not exceeding 59,000 BTU/h, with a height of 88.9 cm, with a width of 44.4 cm, with a length of 74.9 cm |
| 787 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas or liquid propane fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of 40,000 BTU/h, with an output of at least 60,000 BTU/h but not exceeding 120,000 BTU/h, with a height of 88.9 cm, with a width of 36.0 cm, with a length of 74.9 cm |
| 788 | 7322.90.10.21 | HVAC (heating, ventillation and air conditioning) | Steel self-contained natural gas or liquid propane fired furnaces, incorporating blower assemblies driven by electric motors and not electrically heated, with an input of 26,000 BTU/h, with an output of 25,000 BTU/h, with a height of 88.9 cm, with a width of 36.0 cm, with a length of 74.9 cm |
| 789 | 7325.10.00.49 | Steel | Grey cast iron catch basin frames, of specification ASTM A48 Class 35B, 40, 45 or 50, sand cast and shot blasted with machined mating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 790 | 7325.10.00.49 | Steel | Grey cast iron catch basin frames, of specification ASTM A48 Class 35B, 40, 45 or 50, and of specification AASHTO M306-10, sand cast and shot blasted with machined mating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 791 | 7325.10.00.49 | Steel | Ductile iron catch basin frames, of specification ASTM A536 grade 80-55-06 or 100-70-03, and of specification AASHTO M306-10, sand cast and shot blasted with machined mating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 792 | 7325.10.00.49 | Steel | Ductile iron catch basin grates, of specification ASTM A536 grade 80-55-06 or 100-70-03, and of specification AASHTO M306-10, sand cast and shot blasted with machined seating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 793 | 7325.10.00.49 | Steel | Grey cast iron catch basin grates, of specification ASTM A48 Class 35B, 40, 45 or 50, sand cast and shot blasted with machined seating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 794 | 7325.10.00.49 | Steel | Grey cast iron catch basin grates, of specification ASTM A48 Class 35B, 40, 45 or 50, and of specification AASHTO M306-10, sand cast and shot blasted with machined seating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 795 | 7325.10.00.49 | Steel | Grey cast iron manhole covers, of specification ASTM A48 Class 35B, 40, 45 or 50, sand cast and shot blasted with machined mating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 796 | 7325.10.00.49 | Steel | Grey cast iron manhole covers, of specification ASTM A48 Class 35B, 40, 45 or 50, and of specification AASHTO M306-10, sand cast and shot blasted with machined mating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 797 | 7325.10.00.49 | Steel | Ductile iron manhole covers, of specification ASTM A536 grade 80-55-06 or 100-70-03, and of specification AASHTO M306-10, sand cast and shot blasted with machined mating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 798 | 7325.10.00.49 | Steel | Grey cast iron manhole grates, of specification ASTM A48 Class 35B, 40, 45 or 50, and of specification AASHTO M306-10, sand cast and shot blasted with machined seating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 799 | 7325.10.00.49 | Steel | Ductile iron manhole grates, of specification ASTM A536 grade 80-55-06 or 100-70-03, and of specification AASHTO M306-10, sand cast and shot blasted with machined seating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 800 | 7325.10.00.49 | Steel | Grey cast iron manhole grates, of specification ASTM A48 Class 35B, 40, 45 or 50, sand cast and shot blasted with machined seating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 801 | 7325.10.00.49 | Steel | Grey cast iron manhole frames, of specification ASTM A48 Class 35B, 40, 45 or 50, sand cast and shot blasted with machined bearing surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 802 | 7325.10.00.49 | Steel | Grey cast iron manhole frames, of specification ASTM A48 Class 35B, 40, 45 or 50, and of specification AASHTO M306-10, sand cast and shot blasted with machined bearing surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 803 | 7325.10.00.49 | Steel | Ductile iron manhole frames, of specification ASTM A536 grade 80-55-06 or 100-70-03, and of specification AASHTO M306-10, sand cast and shot blasted with machined bearing surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 804 | 7325.10.00.49 | Steel | Grey cast iron tactile warning plates, of specification ASTM A48 Class 35B, 40, 45 or 50, sand cast and shot blasted with machined mounting surfaces and incorporating raised tactile features, with overall dimensions not exceeding 54 inches by 54 inches |
| 805 | 7325.10.00.49 | Steel | Ductile iron tree grates, of specification ASTM A536 grade 80-55-06 or 100-70-03, sand cast and shot blasted with machined seating surfaces and incorporating openings for tree growth and surface drainage, with overall dimensions not exceeding 54 inches by 54 inches |
| 806 | 7325.10.00.49 | Steel | Grey cast iron trench frames, of specification ASTM A48 Class 35B, 40, 45 or 50, sand cast and shot blasted with machined bearing surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 807 | 7325.10.00.49 | Steel | Grey cast iron trench covers, of specification ASTM A48 Class 35B, 40, 45 or 50, sand cast and shot blasted with machined seating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 808 | 7325.10.00.49 | Steel | Grey cast iron trench grates, of specification ASTM A48 Class 35B, 40, 45 or 50, sand cast and shot blasted with machined seating surfaces, with overall dimensions not exceeding 54 inches by 54 inches |
| 809 | 7325.10.00.90 | Steel | Other bars and rods, of gray cast iron, of grade G2, of specification ASTM A48 Class 40, as cast, with a dimension of at least 1.00 inches but not exceeding 30.00 inches |
| 810 | 7325.10.00.90 | Steel | Other bars and rods, of gray cast iron, of grade G2, of specification ASTM A48 Class 40, as cast, with a dimension of at least 1.00 inches but not exceeding 30.00 inches |
| 811 | 7326.19.90 | Steel | Lifting lugs, of forged iron or steel, of grades SA181-70 and SA105. |
| 812 | 7326.19.90.00 | Steel | Couvercles de cercueils, en feuilles d’acier moulé, de type 16ga ou 18ga, avec une spécification DDS, d'une largeur d'un minimum de 36 pouces et d'une largeur maximum de 38 pouces, avec une épaisseur minimale de 0.91 mm et une épaisseur maximale de 1.21mm, d'une longeur de 91,5 pouces, prépercées, et présentent différentes formes de moulage, avec un traitement de surface fini mat sans aucun enduit ni recouvrement. |
| 813 | 7326.20.00 | Steel | Wire racks, of steel, with a length of at least 9 cm but not exceeding 37 cm, with a width of at least 12 cm but not exceeding 37 cm, and with a height of at least 20 cm but not exceeding 75 cm, with centrifuge tube holders in arrays of 5 × 3 with overall dimensions of 12.7 cm in length, 8.3 cm in width, and 7.6 cm in height, with centrifuge tube holders in arrays of 2 × 4 with overall dimensions of 14 cm in length, 8 cm in width, and 9.2 cm in height, with centrifuge bottle holders in arrays of 2 × 3 with overall dimensions of 14 cm in length, 21 cm in width, and 10 cm in height, with Petri dish racks in arrays of 1 × 3 with overall dimensions of 34.3 cm in length, 10.5 cm in width, and 30.5 cm in height, for use at temperatures of at least −223 degrees Celsius but not exceeding 120 degrees Celsius when coated with heat-cured epoxy, or for use at temperatures of at least −40 degrees Celsius but not exceeding 121 degrees Celsius when coated with HDPE, and with a corrosion-resistant coated finish |
| 814 | 7326.90.10 | Steel | Formed pressure-vessel steel heads, formed, including hemispherical, ellipsoidal, torispherical or conical types, of non-alloy or alloy steel, of grade SA414-G or SA516-70, with diameters of 24 or 30 inches, for use as end closures in pressure vessels. |
| 815 | 7326.90.90 | Steel | Laboratory spatulas, of stainless steel, of specification ASTM F899-84, of a total length of at least 5 inches but not exceeding 12 inches, with blade widths of at least 4.8 mm but not exceeding 8 mm, with blade lengths of at least 19 mm but not exceeding 51 mm, and a spoon end of approximately 32 mm in length and approximately 14 mm in width, with blunt or rounded double-ended working tips, with a corrosion-resistant, uncoated metallic finish |
| 816 | 7326.90.90 | Steel | Pressure vessel heads, semi-elliptical and joggled, of non-alloy steel or alloy steel, of grade SA-414G and SA516-70, with a diameters of less than 24 inches or at least 30 inches but not exceeding 72 inches. |
| 817 | 7326.90.90.30 | Steel | Stainless steel P clips, with a length of 1 inch and with an outer diameter of not exceeding 0.5 inch and with a width of not exceeding 0.5 inch. |
| 818 | 7326.90.90.30 | Steel | Other articles of iron or steel, other, hangers and similar supports, for tubes and pipes |
| 819 | 7326.90.90.90 | Steel | Galvanized cast iron snow guards, painted, with fastening strap, with non-through-roof-panel-fastening attachment, without exposed fasteners |
| 820 | 7326.90.90.90 | Steel | Metal drop scupper |
| 821 | 7326.90.90.90 | Steel | Stainless steel clips for 1.0 inch mechanical lock standing seam, fixed clips or expansion clips |
| 822 | 7326.90.90.90 | Steel | Alloy steel forged articles, of grade 5160, further worked with forged ends, with a diameter of at least 17.0 mm but not exceeding 36.0 mm |
| 823 | 7326.90.90.90 | Steel | Pièces d'assemblage en acier moulé comprenant les côtés d'un cerceuil, de types 16ga, 18ga ou 20ga, avec une spécification CRS, d'une longeur de 36 pouces, d'une largeur de 15 pouces, d'une épaisseur minimale de 0.91 mm et une épaisseur maximale de 1.21mm, prépercé pour l’assemblage, le traiment n'inclu aucun enduit ni recouvrement. |
| 824 | 7326.90.90.90 | Steel | Pièces d'assemblage en acier moulé, de types 16ga, 18ga ou 20ga, avec une spécification CRS, d'une longeur de 28 pouces, d'une largeur de 15 pouces, d'une épaisseur minimale de 0.91 mm et une épaisseur maximale de 1.21mm, prépercé pour l’assemblage, le traiment n'inclu aucun enduit ni recouvrement. |
| 825 | 7326.90.90.90 | Steel | Pièces d'assemblage en acier moulé, de types 16ga, 18ga ou 20ga, avec une spécification CRS, d'une longeur de 73 pouces, d'une largeur de 19 pouces, prépercé pour l’assemblage, le traiment n'inclu aucun enduit ni recouvrement. |
| 826 | 7326.90.90.90 | Steel | Vis en acier moulé, de types 16ga, 18ga ou 20ga, d'une longeur de 13 pouces, d'une largeur de 6 pouces, prépercé pour l’assemblage, le traiment n'inclu aucun enduit ni recouvrement. |
| 827 | 7326.90.90.90 | Steel | Support de fixation en acier moulé, de type 16ga, d'une longeur de 2 pouces, d'une largeur de 1 pouce prépercé pour l’assemblage, le traiment n'inclu aucun enduit ni recouvrement. |
| 828 | 7601.20.00.29 | Aluminum | An ingot (bar) of aluminum, of specifications of alloy A201.1. |
| 829 | 7601.20.00.29 | Aluminum | An ingot (bar) of aluminum, of specifications of alloy 319.1. |
| 830 | 7601.20.00.29 | Aluminum | An ingot (bar) of aluminum, of specifications of alloy 535.2. |
| 831 | 7601.20.00.29 | Aluminum | An ingot (bar) of aluminum, of specifications of alloy 713.1. |
| 832 | 7601.20.00.29 | Aluminum | An ingot (bar) of aluminum, of specifications of alloy A360.1. |
| 833 | 7601.90.90.10 | Aluminum | Aluminum roof panels, with expanded polystyrene (EPS) form core, with a length of 4 inches, with a width of 24 inches, with a height of 4 inches |
| 834 | 7604.10.00 | Aluminum | Aluminum bars, rods or profiles, of aluminum not alloyed, of solid cross-section, for use in the machining or fabrication of components for electrical equipment. |
| 835 | 7604.29.00.30 | Aluminum | Aluminum micro-channel tubes, not backed: rolled and extruded but not further worked; alloy A31104-F or equivalent composition and temper; of a thickness of at least 0.027 millimetres but not exceeding 0.045 millimetres, of a width of approximately 25 millimeters and length of at least 235 millimeters but not exceeding 1.846 millimeters. |
| 836 | 7605.19.00 | Aluminum | Aluminum wire, of aluminum not alloyed, supplied on spools or in coils, for use in the manufacture of conductors or components for electrical equipment. |
| 837 | 7605.21.00 | Aluminum | Aluminum wire, flat or shaped, in coils or spools, of alloys 5052-H34, 5182-H36, or 5154-H36, cold-drawn and annealed, with a cross-sectional dimension of thickness of at least 0.018 inches but not exceeding 0.130 inches and width of at least 0.276 inches but not exceeding 0.600 inches, designed for use in the manufacture of tubular non-threaded aluminum fasteners. |
| 838 | 7605.29.00 | Aluminum | Aluminum wire, flat or shaped, in coils or spools, of alloys 5052-H34, 5182-H36, or 5154-H36, cold-drawn and annealed, with a cross-sectional dimension of thickness of at least 0.018 inches but not exceeding 0.130 inches and width of at least 0.118 inches but not exceeding 0.276 inches, designed for use in the manufacture of tubular non-threaded aluminum fasteners. |
| 839 | 7606.11.00 | Aluminum | Rectangular (including square) aluminum plate, sheet or strip, of aluminum not alloyed, of a thickness exceeding 0.2 mm, supplied as sheets or in coils, for use in the manufacture of components for electrical equipment. |
| 840 | 7606.11.00 | Aluminum | Non-alloyed aluminum plates, sheets and strip, in coils, of a thickness exceeding 0.2 mm, within a dimensional range of 0.0078 to 0.125 inches in thickness and 2 to 48.375 inches in width, for use in the manufacture of electrical transformers. |
| 841 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specification BAMS 516-003 and ANSI H35.2, with a gauge of 4.500 inches, with a width of 26.600 inches, and with a length of 88.900 inches. |
| 842 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specification BAMS 516-003 and ANSI H35.2, with a gauge of 5.700 inches, with a width of 18.500 inches, and with a length of 78.800 inches. |
| 843 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specification BAMS 516-003 and ANSI H35.2, with a gauge of 6.000 inches, with a width of 20.400 inches, and with a length of 75.600 inches. |
| 844 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7055PL, of temper T7751, of specification BAC 5439 Class A with ultrasonic inspection in accordance with BAC 5439 Class A, with a gauge of 0.500 inch, with a width of 4.500 inches, and with a length of 341.000 inches. |
| 845 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7055PL, of temper T7751, of specification BAC 5439 Class A with ultrasonic inspection in accordance with BAC 5439 Class A, with a gauge of 0.900 inch, with a width of 10.250 inches, and with a length of 651.000 inches. |
| 846 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003, ANSI H35.2, and BAC 5439 Class A with ultrasonic inspection in accordance with BAC 5439 Class A, with a gauge of 2.000 inches, with a width of 55.500 inches, and with a length of 131.000 inches. |
| 847 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003 and ANSI H35.2, with a gauge of 2.250 inches, with a width of 50.000 inches, and with a length of 116.250 inches. |
| 848 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003, ANSI H35.2, and BAC 5439 Class A with ultrasonic inspection in accordance with BAC 5439 Class A, with a gauge of 2.250 inches, with a width of 54.250 inches, and with a length of 119.000 inches. |
| 849 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003, ANSI H35.2, and BAC 5439 Class A with ultrasonic inspection in accordance with BAC 5439 Class A, with a gauge of 6.750 inches, with a width of 20.400 inches, and with a length of 75.600 inches. |
| 850 | 7606.12.00 | Aluminum | Aluminum plate, alloy 7050P, temper T7451, per BAMS 516-003, ANSI H35.2, and USI specification BAC 5439 Class A with ultrasonic inspection in accordance with BAC 5439 Class A, with a gauge of 6.0 inches, with a width of 18.5 inches, with a length of 78.8 inches. |
| 851 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003 and ANSI H35.2, with ultrasonic inspection in accordance with BAC 5439 Class A, with a gauge of 5.500 inches, with a width of 8.960 inches, and with a length of 110.000 inches. |
| 852 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003 and ANSI H35.2, with ultrasonic inspection in accordance with BAC 5439 Class A, with a gauge of 6.500 inches, with a width of 28.730 inches, and with a length of 109.900 inches. |
| 853 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003 and ANSI H35.2, with ultrasonic inspection in accordance with BAC 5439 Class A, with a gauge of 4.250 inches, with a width of 28.440 inches, and with a length of 82.500 inches. |
| 854 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050, of temper T7451, of specifications BAMS 516-003 and ANSI H35.2 and of specification BAC 5439 Class A including ultrasonic inspection in accordance with BAC 5439 Class A, with a gauge of 4.250 inches, with a width of 28.440 inches, and with a length of 82.500 inches, supplied as a pre-cut plate. |
| 855 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003 and ANSI H35.2 and of specification BAC 5439 Class A with ultrasonic inspection in accordance with BAC 5439 Class A, with a thickness of 2.250 inches, with a width of 11.500 inches, and with a length of 29.250 inches. |
| 856 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003 and ANSI H35.2 and of specification BAC 5439 Class A with ultrasonic inspection in accordance with BAC 5439 Class A, with a thickness of 2.500 inches, with a width of 11.250 inches, and with a length of 29.750 inches. |
| 857 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003 and ANSI H35.2 and of specification BAC 5439 Class A with ultrasonic inspection in accordance with BAC 5439 Class A, with a thickness of 2.500 inches, with a width of 12.250 inches, and with a length of 36.750 inches. |
| 858 | 7606.12.00 | Aluminum | Aluminum plate, of an alloy 7050P, of temper T7451, of specifications BAMS 516-003 and ANSI H35.2 and of specification BAC 5439 Class A with ultrasonic inspection in accordance with BAC 5439 Class A, with a thickness of 2.500 inches, with a width of 13.750 inches, and with a length of 41.000 inches. |
| 859 | 7606.12.00 | Aluminum | Aluminum plates, sheets and strip, of grade 7075, of specification AMS QQA 250/12, with a thickness exceeding 0.2 mm |
| 860 | 7606.12.00 | Aluminum | Aluminum plates, sheets and strip, of grade 6061-T651, of specification AL-PL-QQA250/11/4027, with a thickness exceeding 0.2 mm |
| 861 | 7606.12.00.11 | Aluminum | Aluminum strip in coils, of alloys 5052-H34, 5182-H36, or 5154-H36, cold-rolled and tempered, with a thickness of at least 0.018 inches but not exceeding 0.130 inches, with a width of at least 0.118 inches but not exceeding 7.000 inches, slit or edge-conditioned. |
| 862 | 7606.12.00.11 or 7610.90.90 | Aluminum | Flat-rolled aluminum sheets, corrugated, with a thickness of 1.27 mm, with a width of 44.5 inches, with a length of 96 inches or 120 inches, and with a polycoat finish, Blendz Patina 111a colour. |
| 863 | 7606.12.00.12 | Aluminum | Feuilles d’aluminium, de nuance 1085 H14, H16, H18, conformes à la spécification alliage 1085AA1085, d'une longeur de 120 pouces, d'une largeur de 48 pouces, d'une épaisseur de 0,032 pouce, avec un traitement de surface anodisé, avec un fini miroir et une pellicule de protection en vinyle. |
| 864 | 7607.11.00 | Aluminum | Aluminum foil, not backed, rolled but not further worked, of a thickness excluding any backing not exceeding 0.2 millimetres, supplied in coils or master rolls, of aluminum alloy 8006, 8011, 3003 or 8111, for conversion into household foil or container and bakeware foil products |
| 865 | 7607.20.00 | Aluminum | Sealing tape, of aluminum, of specification RNase - and DNase-free and DMSO-resistant, suitable for use at temperatures of at least −80 degrees Celsius but not exceeding 150 degrees Celsius, in roll form with a width of 78 mm and a length of 370 m, or in pre-cut sheets with a thickness of 20 microns, with a length of 127.76 mm and a width of 85.48 mm, for 96-well or 384-well microplates, and with an adhesive-coated aluminum metallic finish |
| 866 | 7607.20.00.10 | Aluminum | Aluminum foil, printed or not printed, backed with paper, paperboard, or plastic materials, with the aluminum foil component having a thickness not exceeding 0.2 mm (excluding backing materials). |
| 867 | 7610.10.00.20 | Aluminum | Aluminum windows, imported as a complete unit with window glass and frame of extruded aluminum, with a frame depth of 3.25 inches, with a frame sill wall thickness of 0.125 inches, with fixed or operable units. |
| 868 | 7610.90.90.90 | Aluminum | Aluminum cast snow guards, painted, with fastening strap, with non-through-roof-panel-fastening attachment, without exposed fasteners |
| 869 | 7616.99.90 | Aluminum | Aluminum alloy die forging, of an alloy 7085, of temper T7452, of specification LMA-M5085, with a width of 77.200 inches, with a height of 12.700 inches, and with a length of 118.500 inches. |
| 870 | 7616.99.90 | Aluminum | Aluminum alloy die forging, of an alloy 7085, of temper T7452, of specification LMA-M5085, with a width of 77.200 inches, with a height of 12.700 inches, with a length of 118.500 inches. |
| 871 | 7616.99.90 | Aluminum | Aluminum alloy die forging, of an alloy 7085, of temper T7452, of specification LMA-M5085, with a width of 77.200 inches, with a height of 12.700 inches, with a length of 118.500 inches. |
| 872 | 7616.99.90 | Aluminum | Aluminum forging, of an alloy 7050-01, of specification BMS 7-214, with a width of 31.000 inches, with a height of 6.000 inches, with a length of 50.000 inches. |
| 873 | 7616.99.90 | Aluminum | Aluminum forging, of an alloy 7050, of temper T7452, of specification BMS 7-214, with a width of 38.000 inches, with a height of 14.500 inches, with a length of 36.500 inches. |
| 874 | 7616.99.90 | Aluminum | Aluminum forging, of an alloy 7050, of temper T7452, of specification BMS 7-214, with a width of 38.000 inches, with a height of 14.500 inches, with a length of 36.500 inches. |
| 875 | 7616.99.90 | Aluminum | Aluminum alloy die forging, of an alloy 7085, of temper T7452, of specification LMA-M5085, with a width of 77.200 inches, with a height of 12.700 inches, with a length of 118.500 inches. |
| 876 | 7616.99.90 | Aluminum | Aluminum alloy die forging, of an alloy 7085 of temper T7452, of specification LMA-M5085, with a width of 13.500 inches, with a height of 13.500 inches, with a length of 36.000 inches. |
| 877 | 7616.99.90 | Aluminum | Weigh dishes or pans, of aluminum, of a capacity of at least 20 ml but not exceeding 500 ml, with a depth of at least 13 mm but not exceeding 180 mm, with a diameter of at least 40 mm but not exceeding 137 mm, circular or square in shape, with flanged or fluted sides, with an optional finger tab handle, and with an uncoated aluminum metallic finish |
| 878 | 7616.99.90.00 | Aluminum | Aluminum alloy extruded profiles, fabricated as integral extruded bottom plates, of grade 6005A T61 or 6061 T6, with a height of 3.0 inches, with square plan dimensions of 12.0 inches by 12.0 inches, incorporating integral capture tabs with a thickness of 0.1 inch and 0.16 inch |
| 879 | 7616.99.90.29 | Aluminum | Aluminum castings of an alloy A383, with a casting wall thickness of 2.30 mm, with a depth of at least 18.00 inches but not exceeding 20.00 inches and with a length of at least 18.00 inches but not exceeding 36.00 inches. |
| 880 | 7616.99.90.90 | Aluminum | Aluminum articles, lid assemblies, double-walled, cast, incorporating stainless steel components, with a wall thickness of 2.5 mm, with a depth of at least 18.00 inches but not exceeding 20.00 inches, and with a length of at least 18.00 inches but not exceeding 36.00 inches. |
| 881 | 8207.40.00.20 | Tools | Combined tap and reamer with pilot, 1/2-13 UNC thread, Class 2B tolerance, three flutes, manufactured from special-purpose flute geometry (SPFL) 15 high-speed steel, tin coated, with a nominal diameter of 0.5 inch and an overall length of 8 inches. |
| 882 | 8207.60.00 | Tools | Precision chucking reamers, of solid carbide, with a diameter of at least 2 mm but not exceeding 12 mm, with an overall length of at least 2 inches but not exceeding 9 inches, capable of tolerances of ±0.0001 inches, |
| 883 | 8207.60.00 | Tools | Dovetail milling cutter assembly, of steel, consisting of a shank-style milling holder and a slotting cutter, with a cutter diameter of 0.5 inch, with an overall length of 4.25 inches, with a holder diameter of 1.0 inch and with a holder length of 3.5 inches, for metalworking |
| 884 | 8207.60.00 | Tools | Mini boring bar, of solid tungsten carbide, with a cutting diameter of approximately 0.18 inch and with an overall length of 2.5 inches |
| 885 | 8207.70.00 | Tools | Powermill modular milling cutter, of steel, with replaceable cutting inserts, with a nominal diameter of 6 inches, of a diameter of at least 3 inches but not exceeding 8 inches, for use on Computer Numerical Control and conventional milling machines |
| 886 | 8207.70.00 | Tools | Milling tool, of solid micrograin tungsten carbide, one-piece construction with integral shank, with a nominal cutting diameter of 0.5 inch and with a 30-degree included angle |
| 887 | 8207.80.00 | Tools | Groove bar, of solid carbide, with round nose geometry, with a shank width of 0.5 inch, with a groove width of 0.156 inch and with a corner radius of 0.03 inch, for forming internal grooves in pre-bored holes |
| 888 | 8209.00.00 | Tools | Milling and turning inserts, of aluminum oxide ceramic, reinforced with silicon carbide whiskers, manufactured in standard ANSI and ISO geometries including square, triangular, diamond, parallelogram and button styles, designed to fit conventional toolholders and cutters, for machining hardened materials up to approximately 62 Rockwell C |
| 889 | 8209.00.00 | Tools | Milling and turning inserts, of silicon nitride ceramic, phase-toughened, manufactured in standard ANSI and ISO geometries including square, 80-degree diamond, 55-degree diamond, triangular and button styles, designed to fit standard toolholders and milling cutters |
| 890 | 8209.00.00 | Tools | Heavy milling inserts, of tungsten carbide with cobalt binder, with optional tantalum additions, manufactured in standard ANSI and ISO geometries including square, triangular, round and parallelogram styles, designed to fit standard toolholders and milling cutters, with a titanium nitride coating or titanium aluminum nitride coating |
| 891 | 8209.00.00 | Tools | Cutting tool inserts, unmounted, of tungsten carbide, manufactured in 55-degree diamond and button geometries, with nominal sizes of 0.5 inches width by 0.625 inches length and 0.125 inches thickness, or 0.375 inches width by 0.375 inches length by 0.1875 inches thickness, for metalworking slotting and dovetail cutters |
| 892 | 8209.00.00 | Tools | Grooving insert, unmounted, of cubic boron nitride, with dimensions of 0.5 inch by 0.375 inch and with a radius of 0.094 inch |
| 893 | 8209.00.00 | Tools | Grooving insert, unmounted, of coated tungsten carbide, with dimensions of 0.5 inch by 0.375 inch and with a width of cut of 0.154 inch |
| 894 | 8309.90.00.00 | Articles of Base Metal | Hexagonal threaded steel closure plugs, of carbon steel, of a nominal size of 0.75 inch, zinc plated (trivalent) and finished with a Resco 905 dark buff epoxy-phenolic coating, fitted with a Buna rubber gasket |
| 895 | 8309.90.00.00 | Articles of Base Metal | Paint can plugs of tin plate, manufactured to ASTM D450, ASTM D5118, and ASTM D5276 and UN1263, with a diameter of 6.2 inches, with a tin exterior finish, with an epoxy phenolic interior coating. |
| 896 | 8309.90.00.00 | Articles of Base Metal | Paint can plugs of tin plate, manufactured to ASTM D450, ASTM D5118, and ASTM D5276 and UN1263, with a diameter of 3.08 inches, with a tin exterior finish, with an epoxy phenolic interior coating. |
| 897 | 8309.90.00.00 | Articles of Base Metal | Paint can plugs of tin plate, manufactured to ASTM D450, ASTM D5118, and ASTM D5276 and UN1263, with a diameter of 3.88 inches, with a tin exterior finish, with an epoxy phenolic interior coating. |
| 898 | 8708.92.29.20 | Steel | Circular tubes, of non-alloy steel, electric resistance welded, of grade EDDS T1-25, of specification ASTM A787-09. , of a thickness of 0.065 inch, with an outer diameter of 2.500 inches, and of a length of 240 inches, plain-ended, with aluminized coating, not further worked |
Privacy
Information received throughout this submission process is subject to the Access to Information Act and the Privacy Act and is collected under the authority of the Financial Administration Act. Participation in these consultations is voluntary and will have no impacts on services you receive from the Government of Canada. Personal information provided on this form is collected to enable individuals to participate in national and/or international outreach activities, as well as to connect businesses who are seeking remission due to insufficient supply with Canadian manufacturers who self-identify through these consultations.
The collection, use, disclosure and retention of your personal information is in accordance with requirements of the Privacy Act and is further described in the following Personal Information Banks – PSU 938 (Outreach Activities) and PSU 914 (Public Communications). You have the right to access, and request correction of, your personal information. If you have any questions regarding the protection of your personal information, please contact the Department of Finance Canada’s Access to Information and Privacy (ATIP) Coordinator at atip-aiprp@fin.gc.ca. If you are not satisfied with the response to your privacy concern, you have the right to file a complaint with the Office of the Privacy Commissioner of Canada regarding the department’s handling your personal information.