Code of Practice to reduce emissions of PM2.5 and VOCs from iron, steel and ilmenite sector: references


References

Alabama Department of Environmental Management - Air Division - Air Permit No.: 503-0095-X001

Canadian Council of Ministers of the Environment, A Guide to Canada-Wide Standards, 1999

Canadian Council of Ministers of the Environment, Canada-Wide Standard for Benzene in Air - Basic Overview, 1999.

Canadian Council of Ministers of the Environment, CCME Environmental Guidelines for Controlling Emissions of Volatile Organic Compoundsfrom Aboveground Storage Tanks, 1995.

Canadian Council of Ministers of the Environment, Environmental Code of Practice for the Measurement and Control of Fugitive VOC Emissions from Equipment Leaks, 1993.

Canadian Standards Association, Emergency Planning for Industrial Emergencies - A National Standard of Canada, 1995

Canadian Steel Producers Association, Benzene Environmental Best Practice Manual for Coke Producers in Ontario - Controlling and reducing fugitive benzene emissions fromthe coke production byproduct process, CSPA/EC Task Group on Benzene Emissions, 1999

Environment Canada, Environmental Code of Practice for Integrated Steel Mills, CEPA 1999 Code of Practice, EPS 1/MM/7 - March 2001

Environment Canada, Environmental Code of Practice for Integrated Steel Mills, Draft Second Edition, Revised version of December 2005

Environment Canada,Environmental Code of Practice for Non-Integrated Steel Mills, CEPA 1999 Code of Practice,EPS 1/MM/8 - March 2001

Essar Steel Algoma Inc., Fugitive Dust Management Plan, September 30, 2008

European Commission, Integrated Pollution Prevention and Control (IPPC), Best Available Techniques Reference Document on the Production of Iron and Steel, 2001

European Commission, European IPPC Bureau, Best Available Techniques (BAT) Reference Document for Iron and Steel Production, Industrial Emissions Directive 2010/75/EU, 2012

European IPPC Bureau, European Commission, Integrated Pollution Prevention and Control (IPPC) - Reference Document on Best Available Techniques in the Ferrous Metals Processing Industry, Extraction of Oil Mist Emissions and Oil Separation, p. 193, December 2001, Technologies for Sustainable Development, (http://eippcb.jrc.es)

Gerdau Ameristeel, Cambridge, ON Best Management Plan (BMP) for Fugitive Dust Emissions, January, 2007

Indiana Department of Environmental Management - Office of Air Quality, Permits Branch - Part 70 Operating Permit No.: T089-7099-00318

Indiana Department of Environmental Management - Office of Air Quality, Permits Branch - Significant Permit Modification to Part 70 Permit No.:107-7172-00038

International Finance Corporation, World Bank Group, Environmental, Health, and Safety Guidelines, Integrated Steel Mills, April 30, 2007.

UK Environment Agency, Integrated Pollution Prevention and Control (IPPC), Guidance for the Production of Coke, Iron and Steel, Sector Guidance Note IPPC S2.01, 2004

United States (U.S.) Environmental Protection Agency, National Emission Standards for Hazardous Air Pollutants for Source Categories - Subpart H - National Emission Standards for Organic Hazardous Air Pollutants for Equipment Leaks, Federal Register, 40 Code of Federal Regulations (CFR), Chapter (Ch.)1, Subpart H, Section 63

U.S. Environmental Protection Agency, National Emission Standards for Hazardous Air Pollutants - Subpart V - National Emission Standards for Organic Hazardous Air Pollutants - National Emission Standard for Equipment Leaks (Fugitive Sources), Federal Register, 40 CFR Ch.1, Subpart V, Section 61

Report a problem or mistake on this page
Please select all that apply:

Thank you for your help!

You will not receive a reply. For enquiries, contact us.

Date modified: