Guidance document on Off-Road Compression-Ignition Engine Emission Regulations: appendix A

Appendix I: example of an Environmental Protection Agency (EPA) certificate

Example of an EPA certificate as described in G.2.

Example of an EPA certificate as described in G.2
Long description of Figure

This image is an example of a valid EPA certificate. The text in this certificate is specific to the certified engine family.

Text Description of an EPA Certificate:

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
OFFICE OF TRANSPORTATION AND AIR QUALITY
WASHINGTON, DC 20460
CERTIFICATE OF CONFORMITY
2011 MODEL YEAR

Manufacturer:
Engine Family:
Certificate Number:
Intended Service Class:
Fuel Type:

FELs:
g/kW-hr
NMHC+NOx
NOx:
PM:
 

Effective Date:
Date Issued:

Compliance and Innovation Strategies Division
Office of Transportation and Air Quality

Pursuant to Section 111 and Section 213 of the Clean Air Act (42 U.S.C. sections 7411 and 7547) and 40 Code of Federal Regulations (CFR) Part 60 and Part 1039, and subject to the terms and conditions prescribed in those provisions, this certificate of conformity is hereby issued with respect to the test engines which have been found to conform to applicable requirements and which represent the following stationary and nonroad engines, by engine family, more fully described in the documentation required by 40 CFR Part 60 and 1039, and produced in the stated model year.

This certificate of conformity covers only those new stationary and nonroad compression-ignition engines which conform in all material respects to the design specifications that applied to those engines described in the documentation required by 40 CFR Part 60 and 1039 and which are produced during the model year stated on this certificate of the said manufacturer, as defined in 40 CFR Part 60 and 1039.

This certificate of conformity is conditional upon compliance of said manufacturer with the averaging, banking and trading provisions of 40 CFR Part 1039, Subpart H.  Failure to comply with these provisions may render this certificate void ab initio.

It is a term of this certificate that the manufacturer shall consent to all inspections described in 40 CFR Part 1068 and authorized in a warrant or court order.  Failure to comply with the requirements of such a warrant of court order may lead to a revovation or suspension of this certificate for reasons specified in 40 CFR Part 1039.  It is also a term of this certificate that this certificate may be revoked or suspended or rendered void ab initio for other reasons specified in 40 CFR Part 1039.

This certificate does not cover stationary and nonroad engines sold, offered for sale, or introduced, or delivered for introduction, into commerce in the U.S. prior to the effective date of the certificate.

Report a problem or mistake on this page
Please select all that apply:

Thank you for your help!

You will not receive a reply. For enquiries, contact us.

Date modified: