Video tutorials for the online application process
On this page
Determining the cost of your accessibility project
In the Budget section of your application in the Grants and Contributions Online System (GCOS) portal, you will be prompted to click on a link that will take you to the Enabling Accessibility Fund (EAF) calculator.
Important technical notes on the Enabling Accessibility Fund (EAF) calculator
Costs for all project activities (flat rate, non-flat rate, or a mix of the two) must be entered into the EAF calculator. Every applicant must fill this out. You must enter the "total" amount of requested funding from ESDC into of the Budget section of your application for funding in the GCOS portal. This amount can be found on the final page of your calculator.
- Navigating in the calculator: please use the "continue" and "back" button in the calculator to navigate within the calculator. You may use the "back" button to adjust your selections and recalculate project costs. Please do not use the "back" button in your internet browser, as this may cause your session to end, and all progress to be lost
- Inactivity in the calculator: after 60 minutes of inactivity, you will be prompted to continue. If you respond, the session will continue. Otherwise, the session will end, and all of your progress will be lost
- Saving your calculator draft: please refer to the EAF calculator overview video below for instructions on how to save a draft of your in-progress calculator
- Submitting your calculator: please refer to the Final steps for submitting your calculator video below for instructions on how to download a PDF copy of your summary page titled "Total estimated eligible costs for your project"
How to use the Enabling Accessibility Fund calculator
Enabling Accessibility Fund calculator: Overview
Transcript - Enabling Accessibility Fund calculator: Overview
Hello and welcome to the tutorial on the Enabling Accessibility Fund (EAF) online fillable calculator. This tutorial will provide you with an overview of the EAF Calculator, as well as information on how to navigate through the pages in the calculator.
There are three additional videos available that will walk you through the process of applying for a ramp, applying for an accessible washroom, and how to complete the final Steps for submitting your calculator. These tutorials will provide you with examples to guide you through the process of completing the EAF calculator.
The calculator was developed to provide EAF applicants with an estimated cost for some of the more commonly requested accessibility activities. The calculator is interactive and new sections will appear based on the selections you make.
You may notice some differences between the version of the calculator presented in the tutorials and the version that you are using when you will complete your calculator input. As the calculator is updated regularly to reflect inflation and the characteristics of each EAF Call for proposals, some information may vary.
This overview will explain what the EAF calculator is and how this tool can assist you in your application. To start, please make sure to read all of the instructions on the first page and check the box at the bottom of the page confirming you have read the information.
To move to the next page, you need to select the "continue" button at the bottom left-hand side of the page.
You will be prompted to input your organization name, your CRA (Canada Revenue Agency) business number, and email address. Once you have completed this section, please select "Continue" at the bottom left side of the page.
If you need to pause at any point during the process, there is a "Save and continue later" function. Simply click this button, which will open a new page asking you to confirm that you wish to save and continue later. If you select "Yes", you will be prompted to create a password and enter your email address.
Please note that there is a time limit, and this function can only be used once. From the moment you pause your calculator, you will have a 14-day time period to complete and submit your calculator. You can save and continue multiple times during this 14-day period.
Once you have entered and submitted your information, you will receive an email with a link to the calculator. Your progress in the calculator will be available only by clicking on this link provided in the email.
This concludes the EAF calculator Overview.
The following three example videos will demonstrate the process of applying for a ramp, applying for a washroom and the final steps for submitting your calculator. For any questions you might have about the calculator, or if require additional information about the Enabling Accessibility Fund program, please visit our Employment and Social Development Canada funding page.
The web address is:
https://www.canada.ca/en/employment-social-development/services/funding/programs.html
Enabling Accessibility Fund calculator: Accessible ramps
Transcript - Enabling Accessibility Fund calculator: Accessible ramps
Hello and welcome to the tutorial on the Enabling Accessibility Fund (EAF) online fillable calculator.
In this video we will be going through an example of how to complete the calculator when applying for a ramp.
You may notice some differences between the version of the calculator presented in the tutorials and the version that you are using when you complete your calculator input. As the calculator is updated regularly to reflect inflation and the characteristics of each EAF Call for proposals, some information may vary.
At the very beginning of the calculator selections, you will be asked to select your proposed project's activity or activities. The calculator presents you with a list of all the options available under the flat rate costing model. These include ramps, accessible doors, accessible washrooms, elevators, accessible lifts, pool lifts, multisensory rooms and stations, accessible playgrounds, accessible parking, accessible drop-off areas and accessible electric vehicle charging stations. A reminder that this list may look different from the list that you see in the current version of the calculator. Although filling out the calculator replaces the need for obtaining a quote for these flat rate project activities, we still recommend consulting with a certified professional on the specifics of your project.
For projects activities that don't fall under the flat rate costing options, as listed here, there is an "Other activities" option available. Note that for any "Other activities" you will need to provide a quote from a certified professional and attach this quote as a supporting document to your application in the Grants and Contributions Online Services (GCOS) portal.
Since this video is to demonstrate an example of applying for a ramp or multiple ramps, we are going to select the ramp option and then click "Continue".
A new page of the EAF calculator will be displayed. In this section, different questions will be presented to you, and depending on your selections, a variety of options will be provided. Please refer to the ramp section in the Flat rate information sheet to help you choose which options best suit your needs.
We will continue by answering the first question: Are you: renovating an existing ramp or creating a new interior ramp or creating a new exterior ramp?
For this demonstration, we are going to add a ramp just outside of your facility's main entrance. For this scenario, we will select "Creating a new exterior ramp".
Next, you will be asked to choose the ramp rise (height) in feet between 2 and 8 feet. In this example, we will select 2 feet for the ramp rise.
You will also need to select the material you will be using to complete this project. There are two options here: option 1 is wood and aluminum and option 2 is concrete and steel.
In this example, we will be selecting "Wood and aluminum". It is important to select the correct material for your construction project as the costing estimates are based on the selections you choose. You will note that concrete and steel ramps are significantly more expensive costly than wood and aluminum ramps.
The next question asks if you need a weather cover for your exterior ramp. There are three options available: Option 1, a weather cover to shelter the ramp with a steel frame and metal roof; option 2, a weather cover to enclose the ramp with no insulation (walls on one side and roof); and option 3, not applicable. In this example, we will be selecting "weather cover to shelter the ramp with steel frame and metal roof". We are making this selection because we want our exterior ramp to be serviceable year-round.
Finally, you will answer the question:
Is the ramp's location unstable, such as in clay or sand or otherwise requires a deep foundation? You will need to select either "Yes" or "No" from the drop-down list. Let's go ahead and select "No".
In this calculator, whether you are applying for a ramp or an accessible washroom, you will always have the opportunity to add any additional details that are relevant to your project activities. This is also where you should include a rationale if your project is expected to cost more than the flat rate costing estimate. For example, if your project includes extra costs, such as asbestos abatement, you would describe the additional work required here. The additional costs of this work would then be added under the "other activities" section of the calculator.
For some project activities, you can request more than one. If you choose to add another ramp, please follow the same process we just completed for the first ramp. In this example, we will be selecting "No".
Please note that the total project costs will be displayed on the last page of the calculator. Should you wish to revise your selections, you may do so at any time simply by selecting the "back" button found at the bottom of each page.
Now that we are done answering all the questions on this page, you will select "continue" at the bottom left-hand side of the page, to move forward.
All questions marked with an asterisk require a response. Any incomplete or missing information will prevent you from continuing to the next page. In such cases, a red shaded error box will appear at the top of the page, indicating what corrections are needed.
Once you have completed the page, select "continue" and proceed to the project location and taxes page.
This concludes the EAF calculator ramp example. There are other videos available that will follow the process of applying for an accessible washroom and the final steps for submitting your calculator. If you still have questions about the calculator or require additional information about the Enabling Accessibility Fund program, please visit our Employment and Social Development Canada funding page.
The web address is:
https://www.canada.ca/en/employment-social-development/services/funding/programs.html
Enabling Accessibility Fund calculator: Accessible washrooms
Transcript - Enabling Accessibility Fund calculator: Accessible washrooms
Hello and welcome to the tutorial on the Enabling Accessibility Fund (EAF) online fillable calculator.
In this video we will be going through an example of how to complete the calculator when applying for an accessible washroom.
You may notice some differences between the version of the calculator presented in the tutorials and the version that you are using when you complete your calculator input. As the calculator is updated regularly to reflect inflation and the characteristics of each EAF Call for Proposals, some information may vary.
At the very beginning, you will be asked to select your proposed project's activity or activities. The calculator presents you with a list of all of the options available under the flat rate costing model. These include: ramps, accessible doors, accessible washrooms, elevators, accessible lifts, pool lifts, multi-sensory rooms and stations, accessible playgrounds, accessible parking, accessible drop-off areas, and accessible electric vehicle charging stations.
A reminder that this list may look different from the list that you see in the current version of the calculator. Although filling out the calculator replaces the need for obtaining a quote for the flat rate project activities, we still recommend consulting with a certified professional on the specifics of your project.
For project activities that don't fall under the flat rate costing options, as listed here, there is an "Other activities" option available. Note that for any "Other activities" you will need to provide a quote from a certified professional, and attach this quote as a supporting document to your application in the Grants and Contributions Online Services (GCOS) portal.
Since this video is about applying for an accessible washroom or multiple accessible washrooms, you are going to select "accessible washrooms" and then click "Continue".
A new page of the EAF calculator will be displayed. In this section, different questions will be presented to you depending on your selections. Please refer to the Accessible washrooms section in the Flat rate information sheet, which is linked here, to help you choose which option best suit your needs.
You will continue by answering the first question: "Are you renovating an existing washroom or creating a new fully accessible washroom?"
For this demonstration we are going to choose renovating an existing washroom.
You will now follow the next prompt by answering if you are upgrading only some components of the existing washroom, or all. Let's choose "All" so you can see the complete list of available options. Please note, if you select "All" this now becomes a new fully accessible washroom.
The next question will be "Is this a multi-stall washroom?" For this example, we are going to select "Yes".
Next, the calculator will ask "Is this washroom part of a new building or an addition to an existing building?" We are going to select "No" for today's example, because this new washroom is going into an existing building, and we are not adding any square footage as a result of this new washroom. If you are ever unsure about the meaning of a term in the calculator, you can click on the hyperlinks located here which display definitions. If you respond "Yes" to this question, a few additional questions will appear on the specifics of your project.
You now have a variety of other accessibility and safety features that you can add to your renovated accessible stall washroom to further tailor the space to meet the needs of persons with disabilities. This list includes: accessible urinal complete with two grab bars, barrier-free shower package, automatic door operator with controls and electrical hookup, power assisted adult change table with electrical hookup and the emergency call button system. In this example, we will be selecting "Automatic door operator with controls and electrical hookup" to ensure persons with assistive devices can access the accessible washroom. Some of these other options could be applicable in specific instances.
You will proceed to the next section of questions. If your project requires any of these modifications, you would select any that apply. We recommend consulting with a certified contractor to help you determine which of these would be required for your project. The options are: modifications to structural walls (for example moving structural walls), modifications to non-structural walls (for example moving non-structural walls), modifications to existing electrical for lighting and outlets, and modifications to heating, ventilation and air conditioning (HVAC) system (for example moving or rerouting ducts). We are going to select "modifications to existing electrical for lighting and outlets" and "modifications to non-structural walls (for example moving non-structural walls)".
If your project includes plumbing work, there are two options to choose from. These would not apply in all cases and a certified contractor can help determine if these are applicable to your project. You may only select one option that fits with your project, please choose between modifications to existing plumbing locations or modifications to add new plumbing lines. We are going to select "modifications to existing plumbing locations".
In this calculator, whether you are applying for an accessible washroom or any other flat rate activity, you will always have the opportunity to add any additional details that are relevant to your project activities. This is also where you should include a rationale if your project is expected to cost more than the flat rate costing estimate. For example, if your project includes extra costs, such as asbestos abatement, you would describe the additional work required here. The additional costs of this work would then be added under the "Other activities" section of the calculator.
For some project activities, you can request more than one of the same activity. For example, if you choose to add another washroom, please follow the same process we just completed for accessible washroom 1. Please select "Yes" or "No". In this example, we will be selecting "No".
Once you are done answering all the questions on this page, select "Continue" at the bottom left-hand side of the page to move forward.
All questions marked with an asterisk require a response. Any incomplete or missing information will prevent you from continuing to the next page. In such cases, a red shaded error box will appear at the top of the page, indicating what corrections are needed.
Once you have completed the page, select "Continue" and proceed to the project location, and taxes page.
This concludes the EAF calculator accessible washroom tutorial. There are other videos available that will follow the process of applying for a ramp and the final steps for submitting your calculator. If you still have questions about the calculator or require additional information about the Enabling Accessibility Fund program, please visit our Employment and Social Development Canada funding page.
The web address is:
https://www.canada.ca/en/employment-social-development/services/funding/programs.html
Enabling Accessibility Fund calculator: Final steps for submitting your calculator
Transcript - Enabling Accessibility Fund calculator: Final steps for submitting your calculator
Hello and welcome to the tutorial on the Enabling Accessibility Fund (EAF) online fillable calculator.
This tutorial will focus on project location, taxes, as well as the summary page entitled "Total Estimated Eligible Costs for your Project" and submitting your calculator information.
You may notice some differences between the version of the calculator presented in the tutorials and the version that you are using when you will complete your calculator input. As the calculator is updated regularly to reflect inflation and the characteristics of each EAF Call for Proposals, some information may vary.
Once you have completed the first pages on the EAF calculator where you selected your project activities you will then arrive at the project location and taxes page.
First, we will go over the project location requirements. We ask that you indicate which region that the project is located in: Region 1, Region 2, Region 3, Region 4 or Region 5.
To determine the location of your project and the appropriate region to select, use the hyperlink in the calculator called the EAF region tool. A new window will open where you must enter the postal code of the location where your project activities will take place. This may be different than your organization's head office. Based on the postal code you have entered, the EAF region tool will provide the region of your project location. You will return to the calculator and select the appropriate region that was identified in the EAF region tool. The calculator will use this information to determine the costs of the activities based on the project location.
Next, we will go over the information related to taxes that need to be entered.
This portion of the EAF calculator will determine the amount of taxes applicable to your overall project costs. based on your province or territory. Please select from the dropdown list the province or territory where your project will take place. In this example, we will be selecting "Ontario".
Some organization also qualify for a GST/HST rebate. If this is the case for your organization, please select yes and select the applicable amount from the list provided. Otherwise, kindly select "No".
Please select the "Continue" button found at the bottom left corner of the page.
This will bring you to a summary of the total estimated eligible costs for your project. There is a mandatory two-step process to complete in order to finalize your project costs in the calculator.
First, carefully review the breakdown of the estimated eligible costs for your project, total requested funding from ESDC, and the amount required from other funding sources. Subtotals of the activities will show on the right-hand side. As your scroll down, a subtotal for all activities is provided that does not include tax. Taxes are an eligible cost.
The "Amount required from other sources" will include any amount that exceeds the limit set for the maximum amount of funding allowed under a Call for proposals.
In this example, the total eligible cost is $1,114,430.22
The total requested funding from ESDC would be $1,000,000 and the total amount required from other funding sources (because your project costs have exceeded the maximum of 1,000,000) would be $259,306.15.
Before pressing "Submit" we recommend that you go back to the project activities page/pages and either take a screenshot or note down the selections you made for each project activity.
Once you have reviewed your proposed projects summary, scroll to the bottom and click "Submit."
Once you click "Submit", you will be taken to the final page. This page shows the exact same breakdown of your eligible project costs. The final step is to click on the "Print/Download" which will enable you to save a PDF version of the summary page onto your computer. You will need to upload this PDF as a supporting document to your application in the GCOS portal.
Once your calculator information has been submitted, you will receive a confirmation email including a tracking number. The department highly recommends make note of the tracking number that is indicated on your PDF, as well as in the confirmation email that is sent to you after clicking "Submit". Should there be any issues with your application, you will need this tracking number.
This concludes the EAF calculator project location, taxes tutorial, and how to submit your EAF calculator. There are other videos available that provide an overview of the calculator, and how to apply for a ramp or an accessible washroom. If you still have questions about the calculator or require additional information about the Enabling Accessibility Fund program, please visit our Employment and Social Development Canada funding page.
The web address is:
https://www.canada.ca/en/employment-social-development/services/funding/programs.html
How to apply using GCOS
Transcript - How to apply using GCOS
Welcome to the presentation on the Grants and Contributions Online Services, or GCOS, application process for the Enabling Accessibility Fund 2026 Call for proposals.
Just before we begin, I would like to take a moment to acknowledge our presence on the traditional unceded territory of the Algonquin Anishinaabe people.
Our objective today is to explain how you can apply online for the Enabling Accessibility Fund or EAF. The application process is with Grants and Contributions Online Services, or GCOS.
If you haven't had the opportunity to sign up for GCOS yet, I am pleased to let you know that registering online opens the door to easily apply for other Employment and Social Development Canada (ESDC) Grants and Contributions funding opportunities.
GCOS is a secure online portal managed by ESDC for organizations to apply and manage funding opportunities, track applications and submit documents.
Now we will do a demonstration of the Grants and contributions online services GCOS. This will help you use the GCOS when applying for Enabling Accessibility Fund 2026 Call for proposals.
Our GCOS expert will walk you through the online application submission process.
You can directly access the Access grants and contribution online services web page.
If you do not have a GCOS account, you will have to select an option to register, register with GC key or register with your bank. Reminder, the person who will create the GCOS account and will become the primary officer of the account, must have the authority to act on behalf of the organization, including the authority to sign applications for funding, agreements and project management items. And we'll have to validate their identity. To create your GCOS account, you will have to create your organization profile and register your organization, where you will enter your Canada Revenue Agency business number, legal name of your organization and address. As soon as this step is done, you can immediately apply for funding. However, it's only after receiving an e-mail confirming that your access to GCOS has been granted that the Call for proposal for Enabling Accessibility Funds youth will become available under open Calls for proposal.
In order to start your application, click "Apply". Clicking "Apply" initiates your application. Enter your project title, then click "Next".
At this time, you will be presented with the application page and all the necessary screens which have to be completed in order to submit your application. A legend is also available on the right and indicates what screens must be completed.
"Help and support contact us" allows you to send technical questions when completing your application. You will have convenient 24/7 access to your account, including on all mobile devices, which means that you are able to initiate your application and return to it after a couple of hours or a couple of days until the end of the CFP.
All the mandatory screens are identified with a mandatory symbol orange exclamation mark.
Once the screen has been successfully saved, the screen will be updated with the completed symbol, a green check mark.
Within the screen, all mandatory questions are identified with an asterisk in the word required.
Once you have completed all the mandatory screens, a green check mark will be displayed by each of the screens, and this allows you to submit your application. A confirmation will be displayed on the screen with a confirmation number. That confirmation number will also be sent to you by email.
If you just initiated your GCOS registration to submit your application, and in order to benefit from all the different components of GCOS such as "track the status of your application", "Sign an agreement", "Manage active project", "Submit document", "Review past project", you will be required to complete your registration by validating and authenticating your identity.
This can be done online using your CRA My account signing information. If you have a valid My Account for individual or my business account, you can also validate your identity and in person at a Service Canada centre. Once both your organization and identity have been validated, you will receive an authorization code. This once this code is entered and GCOS your registration is completed.
I hope this demonstration provides you a great overview and will help you apply using GCOS. Thank you for your attention.
Thank you very much for taking the time to view our presentation.
We wish you success with your application.
Have a nice day.