1977 |
Canadian (Chlorobiphenyls Regulations) and U.S. borders closed to PCBs |
Canada and U.S. both pass legislation making it illegal to import PCBs (except for the importing to Canada for the purpose of destruction). |
1980 |
U.S. PCB waste export/import ban imposed |
|
1985 |
Transportation of Dangerous Goods Regulations (TDGR) introduced |
Regulates transport of hazardous materials, including PCB wastes |
1986 |
Canada-US Agreement on the Trans-boundary Movement of Hazardous Waste |
Administrative conditions for export, import and transportation of hazardous waste |
1988 |
Canadian Environmental Protection Act (CEPA) introduced |
Designates PCBs as "Toxic Substance", provides for regulations respecting PCBs |
Late 1980s |
PCB shipments from Canada to France and Ireland approved. |
Shipments successfully transported but enormous public concern in both Canada and country of receipt. |
1989 |
Failed attempt to export PCB wastes to the United Kingdom. |
Canada ultimately accepted return of the ships |
1989 |
The Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal signed by Canada |
Canada agrees to work to implement the Convention |
1990 |
PCB Waste Export Regulations introduced |
Prohibits export to all countries except US |
1992 |
Canada ratifies Basel Convention |
Canadian legislation to apply Convention rules |
1992 |
Export and Import of Hazardous Wastes Regulations introduced |
Instituted to satisfy the requirements of the Basel Convention. PCBs regulated as a hazardous waste. |
1994 |
North American Agreement on Environmental Cooperation (NAAEC) Side Agreement to NAFTA |
Permits restrictions of transboundary movement and use of potentially harmful chemicals and treatment processes that do not meet the standards of a host country |
Nov. 15 1995 |
One US company granted "enforcement discretion" to import into US PCB wastes from Canada |
Several U.S. companies eager to begin importing Canadian PCBs for destruction; have contracts in place waiting for border opening |
Nov. 20 1995 |
Interim Order under CEPA amends 1990 PCB Waste Export Regulations |
PCB exports to the US cease. |
1996 |
CCME Guidelines on PCBs clarified |
Clarifies prohibition landfilling of PCBs greater than 50 ppm |
1996 |
U.S. Import Rule on PCB waste imports |
Allows import of PCB waste into the U.S. |
Feb. 7 1997 |
Canadian PCB Waste Export Regulations, 1996 in force |
Replaced Interim Order and permitted export of PCBs to the U.S. for destruction but not for landfilling |
July 8 1997 |
U.S. Court of Appeals rules that the EPA did not have the statutory authority to allow the import of PCBs to the U.S. |
U.S. border closed to all imports of PCBs. Some shipments had taken place between Feb. and July 1997, Canadian notifiers informed of US prohibition. |
1999 |
Several PCB waste management companies express interest in importing PCBs from outside Canada |
Environment Canada begins to consider adding import provisions to the PCB Waste Export Regulations |
1999 |
Alberta government has approved to import of hazardous waste, including PCBs, at the Swan Hills Treatment Centre. |
No notices for import of PCBs into Alberta received to date. |
1999 |
CEPA, 1999 |
Builds on federal authority to regulate movements of wastes and recyclable materials. |
March 2000 |
Attempt to import PCB contaminated transformers from US military base in Japan to facility in Northern Ontario. |
Shipment returned when Ontario determined that the facility was not authorized to receive the waste even if it was below the 50 ppm level. |
Oct. 2000 |
Swan Hills operator provided Province of Alberta with written notice of its intention to cease operations at facility on Dec. 31, 2000 |
Subsequent announcement from the Province that an interim operator has been selected. |