Code of practice for managing particulate matter emissions in the potash sector: references

Official title: Code of practice for the management of PM_2.5 emissions in the potash sector in Canada

References

Cheminfo Services Inc. 2013. Particulate Matter Emissions in the Canadian Potash Sector. Final Report.

Hatch, Consulting Engineering and Project Implementation. 2008. Potash Environment Canada, Mining and Processing Division Canadian Potash Mining Sector Foundation Report. Potash Foundation Final Report.

AMEC Engineering & Construction Services Limited (1990) Potash Processing in Saskatchewan - A Review of Process Technologies

American Society for Testing and Materials (ASTM) D-6216-07 (2007) Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications

Biotechnology and Environmental Engineering R & D Ltd (2004) 3.3 Potash: 3.3.1 Mineralogy and Mining Techniques.

Bonine, S. and Otte, C., Monitor Technologies LLC, (2010) How to detect leaking or broken filters with a triboelectric monitor”, Powder and Bulk Engineering

CED Engineering (1998) Baghouses and Filters for Particulate Matter Control

Cheminfo Services Inc. (2009) Technical Evaluation of Options for Air Pollution Control of Emissions from the Integrated Iron & Steel and Non-Integrated Steel Sub-sectors, Part One - Volatile Organic Compound (VOC) and Particulate Matter (PM), Final Report.

Chevron Phillips Chemical Company LLC (2012) Introduction to Mineral Processing: Froth Flotation

Energy Information Administration (1994) Longwall Mining

Environment Canada, (1993) Standard Reference Methods for Source Testing: Measurement of Emissions of Particulate from Stationary Sources, Reference Method EPS 1/RM/8.

GEA Barr-Rosin (2012) Solids Drying

GEA Process Engineering Inc. (2012) Fluid Bed Drying - Fundamentals

Marama, PM CEMS Webinar (Oct. 6, 2011) TEOM Technology

Midwest Research Institute (2000) Current Knowledge of Particulate Matter (PM) Continuous Emission Monitoring, United States (US) Environmental Protection Agency, Office of Air Quality Planning and Standards, Emission Monitoring and Analysis Division, Research Triangle Park, EPA-454/R-00-039

Natural Resources Canada (2009) Canadian Minerals Yearbook: Potash

Partha Das Sharma (2008) Sublevel Caving Technique

United States Environmental Protection Agency (U.S. EPA), Air Pollution Control Cost Manual, Sixth Edition (EPA/452/B-02-001), 2002, Section 6 Particulate Matter Controls.

U.S. EPA, Air Pollution Training Institute (APTI), SI:445 - Introduction to Baseline Source Inspection Techniques, Lesson 12 - Level 2 Inspections.

U.S. EPA, Air Pollution Training Institute (APTI), SI:445 - Introduction to Baseline Source Inspection Techniques, Lesson 10 - Operation of Electrostatic Precipitators

U.S. EPA, Air Pollution Training Institute (APTI), SI:445 - Introduction to Baseline Source Inspection Techniques, Lesson 17 - Operation of Mechanical Collectors

U.S. EPA, Air Pollution Training Institute (APTI), SI:445 - Introduction to Baseline Source Inspection Techniques, Lesson 12 - Level 1 Inspections

U.S. EPA, Air Pollution Training Institute (APTI), SI:445 - Introduction to Baseline Source Inspection Techniques, Lesson 10 - Operation of Electrostatic Precipitators

U.S. EPA, CEMS Performance Specification 1 for Opacity

U.S. EPA (2003) National Emission Standards for Hazardous Air Pollutants: Taconite Iron Ore Processing; Final Rule (40 CFR Part 63 RRRRR), Oct 29, 2003.

U.S. EPA, (August 1998) Technical Guidance Document: Compliance Assurance Monitoring (CAM), Revised Draft

U.S. EPA, Test Method 201A: Determination of PM₁₀ and PM_2.5 Emissions from Stationary Sources (Constant Sampling Rate Procedure)

U.S. EPA, Test Method 5: Determination of Particulate Matter Emissions from Stationary Sources

Washington State University (1994) Potash Crystallization

Environment Canada. 2009. Environmental Code of Practice for Metal Mines. Mining and Processing Division. 1st Edition, 2009.

Environment Canada, Environmental Code of Practice for Base Metals Smelters and Refineries - CEPA 1999 Code of Practice, March 2006, (PDF 2.6 MB).

Environment Canada, Environmental Code of Practice for Integrated Steel Mills - CEPA 1999 Code of Practice, 1st Edition, March 2001, (PDF 689 kB).

Environment Canada, Environmental Code of Practice for Non-Integrated Steel Mills - CEPA 1999 Code of Practice, 1st Edition, March 2001, (PDF 582 kB).

Environment Canada, National Pollutant Release Inventory (NPRI).

Ministry of the Economy. 2012. Potash Mining Suppy Chain Requirement Guide. Greenfield Mine Lifecycle Costs. Hatch Limited.

Perucca, C.F. 2001. Potash Processing in Saskatchewan. A Review of Process Technologies.

Klein, O.M., and Reid, K.W., Goldsmith, E.L. 1994. Pollution Control in Fertilizer Production. Edited by C.A. Hodge & N.N. Popovich. Chapter 27, Air Emissions at Potassium Chloride (KCl) Facilities.