Règlement multisectoriel sur les polluants atmosphériques : documents incorporés par renvoi

Plusieurs documents sont incorporés par renvoi dans le Règlement multisectoriel sur les polluants atmosphériques (le règlement) et ces documents pourront faire l’objet de mises à jour périodiques. Pour la majorité des documents incorporés par renvoi, les entités réglementées doivent s’assurer d’utiliser la version la plus récente. S’il y a incohérence, les versions spécifiées dans le règlement auront préséance. Par souci de commodité, des hyperliens sont fournis ci-dessous :

Documents de l’Environmental Protection Agency (EPA) des États-Unis

Ces méthodes peuvent être téléchargées du site internet de l’EPA des États-Unis (anglais seulement).

 

Normes de l’American Society for Testing and Materials (ASTM)

Des normes de l’American Society for Testing and Materials (ASTM) sont incorporées par renvoi dans le règlement et sont accessibles moyennant des frais auprès de l’ASTM International, en anglais seulement. Malheureusement, nous ne pouvons pas vous offrir un lien direct à chacune des méthodes de référence.

  • ASTM D240-09: Standard test method for heat of combustion of liquid hydrocarbon fuels by bomb calorimeter
  • ASTM D1826-94: Standard test method for calorific (heating) value of gases in natural gas range by continuous recording calorimeter
  • ASTM D1946-90: Means the method entitled standard practice for analysis of reformed gas by gas chromatography
  • ASTM D1945-03: Standard test method for analysis of natural gas by gas chromatography,
  • ASTM D3588-98: Standard practice for calculating heat value, compressibility factor, and relative density of gaseous fuels,
  • ASTM D4239-12: Method entitled standard test method for sulfur in the analysis sample of coal and coke using high-temperature tube furnace combustion
  • ASTM D4294-10: Standard test method for sulfur in petroleum and petroleum products by energy dispersive xray fluorescence spectrometry,
  • ASTM D4809-09ae1: Standard test method for heat of combustion of liquid hydrocarbon fuels by bomb calorimeter (precision method)
  • ASTM D4891-89: Standard test method for heating value of gases in natural gas range by stoichiometric combustion
  • ASTM D5291-10: Standard test methods for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
  • ASTM D5373-08: Standard test methods for instrumental determination of carbon, hydrogen, and nitrogen in laboratory samples of coal
  • ASTM D5468-02: Standard test method for gross calorific and ash value of waste materials
  • ASTM D5865-12: Standard test method for gross calorific value of coal and coke,
  • ASTM D6348-12e1: Standard test method for determination of gaseous compounds by extractive direct interface fourier transform infrared (FTIR) spectroscopy
  • ASTM D6522-11: Standard test method for determination of nitrogen oxides, carbon monoxide, and oxygen concentrations in emissions from natural gas-fired reciprocating engines, combustion turbines, boilers, and process heaters using portable analyzers
  • ASTM E775-87(2008)e1: Standard test methods for total sulfur in the analysis sample of refuse-derived fuel
  • ASTM E777-08: Standard test method for carbon and hydrogen in the analysis sample of refuse-derived fuel
  • ASTM E778-08: Standard test methods for nitrogen in the analysis sample of refuse-derived fuel

 

Détails de la page

Date de modification :