Submission requirements for evidence of conformity for on-road motorcycles
Official title: Submission requirements for evidence of conformity for on-road motorcycles in relation to the On-road Vehicle and Engine Emission Regulations made under the Canadian Environmental Protection Act, 1999 : guidance document
Disclaimer
This document is intended to provide guidance only. It does not in any way supersede or modify the Canadian Environmental Protection Act (CEPA), 1999, the On-Road Vehicle and Engine Emission Regulations (ORVEER), or their amendments. In the event of an inconsistency between this document and the CEPA and/or the ORVEER, the CEPA and the ORVEER prevail.
May 2020
Table of contents
- 1.0 Purpose
- 2.0 Evidence of conformity
- 2.1 Covered by an EPA certificate
- 2.1.1 Vehicle covered by an EPA certificate and sold concurrently in Canada and in the United States – subsection 35(1)
- 2.1.2 Vehicle covered by an EPA certificate and affixed with the NEM – subsection 35(1)
- 2.1.3 Vehicle covered by an EPA certificate and not sold concurrently in Canada and the United States or not affixed with a NEM – subsection 35(1.1)
- 2.2 Equivalent vehicle – section 35.1
- 2.3 Canada-unique vehicle – section 36
- 2.1 Covered by an EPA certificate
- 3.0 Battery powered fully electric motorcycles
- 4.0 Incomplete motorcycles
- 5.0 Using an EPA motorcycle engine certification
- 6.0 Administrative information
- 7.0 References
List of appendices
- Appendix A – Example of an EPA certificate
- Appendix B – Example of a statement that the NEM is affixed
- Appendix C – Example of a statement of compliance letter (equivalent)
- Appendix D – Example of a comparison table for equivalent motorcycles
- Appendix E – Example of a statement of compliance letter
- Appendix F – Technical information requirements
- Appendix G – VECI label
- Appendix H – Example of a statement of compliance letter (electric)
- Appendix I – Technical Information requirements (electric)
- Appendix J – VECI label (electric)
- Appendix K – EPA guidance letter: Certification procedure for highway motorcycle engines
Page details
- Date modified: