Consultations sur l'approvisionnement intérieur
Le gouvernement du Canada sollicite l'avis des producteurs canadiens et des associations industrielles sur leur capacité à produire une gamme de produits qui étaient soumis à des droits de douane lors de leur importation.
Les contributions à ces consultations serviront à déterminer si ces produits sont fabriqués au Canada. S'ils ne sont pas fabriqués au Canada, les importateurs de ces produits peuvent bénéficier d'un allégement tarifaire.
Contexte
Le 4 mars 2025, le gouvernement du Canada a défini un processus et un cadre pour l'examen des demandes de remise tarifaire (c'est-à-dire d'allégement tarifaire) sur les produits importés des États-Unis.
La remise des droits de douane sur les importations en provenance des États-Unis est envisagée dans les cas suivants :
- Dans les cas où les marchandises utilisées comme intrants ne peuvent pas être obtenues sur le territoire national, que ce soit sur une base nationale ou régionale, ou raisonnablement à partir de sources non américaines.
- Pour faire face, au cas par cas, à d'autres circonstances exceptionnelles qui pourraient avoir de graves répercussions sur l'économie canadienne.
Un cadre de remise similaire est également en place pour les droits de douane visant les importations d’acier et d’aluminium en provenance de la Chine, les contingents tarifaires (CT) applicables à l’acier ainsi que les surtaxes sur les produits dérivés de l’acier.
Un élément clé de l'évaluation par le gouvernement des demandes de remise en vertu de ces cadres est la question de savoir si le produit importé peut raisonnablement être obtenu sur le marché intérieur.
Objet de la présente consultation
Le ministère des Finances du Canada consulte les producteurs canadiens afin de déterminer si les produits énumérés ci-dessous peuvent être obtenus sur le marché intérieur.
Si votre entreprise est en mesure de fabriquer l'un des produits répertoriés dans le tableau ci-dessous, veuillez l'indiquer en remplissant le formulaire en ligne.
Si un fournisseur canadien est identifié, l'entreprise demandant l'allégement tarifaire sera invitée à contacter ce fournisseur afin d'évaluer si ses besoins d'achat peuvent être satisfaits (c'est-à-dire les quantités, les spécifications, les délais).
Cette consultation est ouverte jusqu'au 21 juin 2026 à 23h 59 (HAP).
Des documents complémentaires ou des questions peuvent être envoyés à l'adresse suivante : remissions-remises@fin.gc.ca.
Par souci de clarté, les catégories de marchandises suivantes sont couvertes par la présente consultation :
- Aluminium (barres, tôles, tubes, feuilles, films d'emballage)
- Produits en bois transformé
- Matériaux d'emballage (carton)
- Joints, garnitures et revêtements
- Structures en acier
- Appareils électroménagers et équipements
- Verre et vitrages
- Matériaux ferroviaires
- Acier et fer (tôles, bobines, barres, tuyaux, tubes, fixations, fils, chaînes)
- Composants pour barbecues
- Serres et pièces connexes
- Luminaires
- Lames et outils en acier
Liste des produits à consulter
Vous trouverez ci-dessous une liste détaillée des produits faisant l'objet d'une consultation, y compris leur code SH et leur description physique.
Nouveau:
Pour certains produits, le code SH approprié reste à déterminer (à confirmer). Dans ces cas, deux codes SH potentiels ont été inclus à titre d'examen. Toutefois, seul le code SH le plus approprié serait inclus dans le décret de remise, s’il est approuvé.
| Code de produit | Code SH | Catégorie | Description du produit (telle que décrite par le demandeur, dans la langue dans laquelle elle a été reçue) |
|---|---|---|---|
| 1 | Joints, garnitures et revêtements | 3925.90.00.90 | Extruded vinyl interior corner cladding profile configured for 45-degree or 30-degree corners, with a length of 240 inches |
| 2 | Joints, garnitures et revêtements | 3925.90.00.90 | Extruded snap-fit vinyl interior cladding profile configured for 45-degree or 30-degree transitions, with a length of 120 inches. |
| 3 | Joints, garnitures et revêtements | 4016.93.00.00 | Extruded 80 Durometer EDPM elastomeric gasket profile providing compression sealing, air sealing, and thermal separation. |
| 4 | Joints, garnitures et revêtements | 4016.93.00.00 | Extruded ethylene propylene diene monomer (EPDM) rubber gaskets |
| 5 | Produits en bois d'ingénierie | 4412.49.00 | Laminated veneer lumber (LVL), Structural grade: 1.9E to 2.0E modulus of elasticity. Thickness: approximately 1‑3/4 inches to 3‑1/2 inches. Width: approximately 9‑1/2 inches to 16 inches. Length: up to 60 feet. Rectangular solid-section members with uniform grain orientation. Supplied unfinished; may be factory edge-coated or sealed for moisture resistance during transport. |
| 6 | Produits en bois d'ingénierie | 4418.83.00 | Prefabricated wood I‑joists consisting of structural flanges of laminated veneer lumber (LVL) or solid sawn dimensional lumber, bonded to an oriented strand board (OSB) web. Thickness is 2’’ ½ inches. Height is either 9’’ ½, 11’’ 7/8, 14’’ or 16’’ and with a length of 48’. |
| 7 | Emballage | 4819.10.00 | Shipping carton, of solid virgin fibreboard, designed to the profile of an automotive door-sash assembly, with outer dimensions of 58 inch length by 45 inch width by 29 inch height, with a tare weight of 95 lbs, configured to hold 72 parts per pack arranged in four layers of 18 parts each, with part-specific die-cut internal dunnage and built-up paperboard support blocks, laminated with water-resistant adhesive, certified ISTA1B vibration tested. |
| 8 | Emballage | 4819.10.00 | Shipping carton, of solid virgin fibreboard, designed to the profile of an automotive A-pillar inner panel, with outer dimensions of 89 inch length by 47 inch width by 42 inch height, with a tare weight of 125 lbs, configured to hold 14 parts per carton with two cartons per pallet (28 parts per pack), with part-specific die-cut internal dunnage and built-up paperboard support blocks, laminated with water-resistant adhesive, certified ISTA1B vibration tested. |
| 9 | Emballage | 4819.10.00 | Shipping carton, of solid virgin fibreboard, designed to the profile of an automotive A-pillar outer panel, with outer dimensions of 89 inch length by 47 inch width by 42 inch height, with a tare weight of 125 lbs. configured to hold 10 parts per carton with two cartons per pallet (20 parts per pack), with part-specific die-cut internal dunnage and built-up paperboard support blocks, laminated with water-resistant adhesive, certified ISTA1B vibration tested. |
| 10 | Emballage | 4819.10.00 | Shipping carton, of solid virgin fibreboard, designed to the profile of an automotive B-pillar panel, with outer dimensions of 89 inch length by 47 inch width by 25.5 inch height, with a tare weight of 125 lbs, configured to hold 15 parts per pack, with part-specific die-cut internal dunnage and built-up paperboard support blocks, laminated with water-resistant adhesive, certified ISTA1B vibration tested. |
| 11 | Emballage | 4819.10.00 | Shipping carton, of solid virgin fibreboard, designed to the profile of an automotive roof panel, with outer dimensions of 96 inch length by 69 inch width by 50 inch height, with a tare weight of 244 lbs, configured to hold 13 parts per pack, with part-specific die-cut internal dunnage and built-up paperboard support blocks, laminated with water-resistant adhesive |
| 12 | Emballage | 4819.10.00 | Shipping carton, of solid virgin fibreboard, designed to the profile of an automotive sill panel, with outer dimensions of 104 inch length by 48 inch width by 44 inch height, with a tare weight of 196 lbs, configured to hold 22 parts per pack arranged in two layers of 11 parts each, with part-specific die-cut internal dunnage and built-up paperboard support blocks, laminated with water-resistant adhesive |
| 13 | Emballage | 4819.10.00.90 | Regular slotted cartons, of corrugated kraft paperboard, of B flute, of Edge Crush Test (ECT) 32, with an external length of 473.1 mm, with an external width of 384.2 mm, with an external height of 230.2 mm, with an internal length of 466.7 mm, with an internal width of 377.8 mm, with an internal height of 217.4 mm, unprinted and glued, uncoated |
| 14 | Emballage | 4819.10.00.90 | Regular slotted cartons, of corrugated kraft paperboard, of BC flute, of Edge Crush Test (ECT) 51, with an external length of 800.0 mm, with an external width of 609.0 mm, with an external height of 636.0 mm, with an internal length of 786.0 mm, with an internal width of 595.0 mm, with an internal height of 607.0 mm, printed and glued, uncoated |
| 15 | Emballage | 4819.10.00.90 | Regular slotted cartons, of corrugated kraft paperboard, of BC flute, of Edge Crush Test (ECT) 51, with an external length of 982.0 mm, with an external width of 609.4 mm, with an external height of 636.2 mm, with an internal length of 967.6 mm, with an internal width of 595.0 mm, with an internal height of 607.3 mm, printed and glued, uncoated |
| 16 | Emballage | 4819.10.00.90 | Regular slotted cartons, of corrugated kraft paperboard, of BC flute, of Edge Crush Test (ECT) 51, with an external length of 982.0 mm, with an external width of 609.4 mm, with an external height of 636.2 mm, with an internal length of 967.6 mm, with an internal width of 595.0 mm, with an internal height of 607.3 mm, printed and glued, uncoated |
| 17 | Emballage | 4819.10.00.90 | Corrugated inserts, of kraft paperboard, of BC flute, with a length of 595.0 mm, with a width of 478.0 mm, scored and cut, unprinted, uncoated |
| 18 | Emballage | 4819.10.00.90 | Corrugated inserts, of kraft paperboard, of BC flute, of Edge Crush Test (ECT) 51, with a length of 1173.0 mm, with a width of 607.0 mm, scored, unprinted, uncoated |
| 19 | Emballage | 4819.10.00.90 | Corrugated wrappers, of kraft paperboard, of C flute, of Edge Crush Test (ECT) 32, with a length of 548.0 mm, with a width of 354.0 mm, unprinted, uncoated |
| 20 | Emballage | 4819.10.00.90 | Corrugated wrappers, of kraft paperboard, of B flute, of Edge Crush Test (ECT) 32, with a length of 874.4 mm, with a width of 600.2 mm, unprinted, uncoated |
| 21 | Emballage | 4819.10.00.90 | Corrugated wrappers, of kraft paperboard, of B flute, of Edge Crush Test (ECT) 32, with a length of 1026.7 mm, with a width of 600.2 mm, unprinted, uncoated |
| 22 | Emballage | 4819.10.00.90 | Corrugated inserts, of kraft paperboard, of B flute, of Edge Crush Test (ECT) 32, with a length of 515.0 mm, with a width of 219.0 mm, unprinted, uncoated |
| 23 | Emballage | 4819.10.00.90 | Corrugated trays, of kraft paperboard, of B flute, of Edge Crush Test (ECT) 32, with a length of 1070.0 mm, with a width of 841.2 mm, scored, unprinted, uncoated |
| 24 | Emballage | 4819.10.00.90 | Corrugated inserts, of kraft paperboard, of B flute, of Edge Crush Test (ECT) 32, with a length of 685.8 mm, with a width of 619.2 mm, scored and cut, unprinted, uncoated |
| 25 | Emballage | 4819.10.00.90 | Corrugated trays, of kraft paperboard, of B flute, of Edge Crush Test (ECT) 32, with a length of 728.0 mm, with a width of 581.4 mm, scored and cut, unprinted, uncoated |
| 26 | Emballage | 4819.10.00.90 | Corrugated trays, of kraft paperboard, of B flute, of Edge Crush Test (ECT) 32, with a length of 1232.0 mm, with a width of 841.2 mm, scored and cut, unprinted, uncoated |
| 27 | Emballage | 4819.10.00.90 | Corrugated inserts, of kraft paperboard, of B flute, of Edge Crush Test (ECT) 32, with a length of 847.8 mm, with a width of 619.2 mm, scored and cut, unprinted, uncoated |
| 28 | Emballage | 4819.10.00.90 | Corrugated trays, of kraft paperboard, of B flute, of Edge Crush Test (ECT) 32, with a length of 1010.0 mm, with a width of 708.5 mm, scored and cut, unprinted, uncoated |
| 29 | Verre et vitrages | 7008.00.00 | Sealed insulated glass unit comprising two panes of tempered glass with a spectrally selective low-emissivity coating and an argon-filled cavity, of rectangular shape, with dimensions of 30 inches by 41.25 inches and an overall thickness of 0.875 inches |
| 30 | Verre et vitrages | 7008.00.00 | Sealed insulated glass unit comprising two panes of tempered glass with a spectrally selective low-emissivity coating and an insulated spacer assembly, of rectangular shape, with dimensions of 30 inches by 46.75 inches and an overall thickness of 0.875 inches |
| 31 | Verre et vitrages | 7008.00.00 | Sealed insulated glass unit comprising two panes of tempered glass with a spectrally selective low-emissivity coating and an insulated spacer system, of trapezoidal shape, with dimensions of 37.375 inches by 14.375 inches by 1 inch and an overall thickness of 0.875 inches, supplied in left-hand and right-hand orientations |
| 32 | Verre et vitrages | 7008.00.00 | Sealed insulated glass unit comprising two panes of tempered glass with a spectrally selective low-emissivity coating and an insulated spacer system, of trapezoidal shape, with dimensions of 46.75 inches by 31.375 inches by 14.625 inches and an overall thickness of 0.875 inches, supplied in left-hand and right-hand orientations |
| 33 | Acier | 7208.25.00.00 | Flat-rolled products of iron or non-alloy steel, in coils, not further worked than hot-rolled, pickled and oiled, of a width of 1,306 mm, of a thickness of 5 mm |
| 34 | Acier | 7208.27.00 | Flat-rolled products of carbon steel, hot-rolled and pickled, in coils, of specification JIS G3134 SPFH 590, with a nominal thickness of 0.098 inches, with a width exceeding 44.925 inches, uncoated |
| 35 | Acier | 7208.27.00 | Flat-rolled products of carbon steel, hot-rolled and pickled, in coils, of specification HSLA S500MC EN10149-2, with a nominal thickness of 0.709 inches, with a width exceeding 890 mm, uncoated |
| 36 | Acier | 7208.51.00.22 | Steel sheet, of ASTM grade 80, hot-rolled, with a thickness of 0.495 inches, with a width of 48.000 inches, and with a length of 120.000 inches, pickled and oiled |
| 37 | Structures métalliques | 7208.52.00 | Steel sheets, abrasion-resistant, hot-rolled, pickled and oiled, of grade AR200, of specification ASTM A6, with a thickness of 6.35 mm (nominal 0.25 inches), with a width of 60 inches, and with a length of 120 inches |
| 38 | Structures métalliques | 7208.52.00 | Steel sheets, abrasion-resistant, hot-rolled, pickled and oiled, of grade AR250, of specification ASTM A6, with a thickness of 0.1345 inches (10 gauge), with a width of 60 inches, and with a length of 120 inches |
| 39 | Acier | 7208.52.00 | Abrasion-resistant sheet steel, hot-rolled, pickled and oiled, of grade AR200, of specification ASTM A6, with a hardness of at least 170 BHN (Brinell Hardness Number) but not exceeding 250 BHN (Brinell Hardness Number), of a thickness of 0.25 inches (6.35 mm), of a width of 60 inches (1524 mm), of a length of 120 inches (3048 mm) |
| 40 | Acier | 7208.52.00 | Abrasion-resistant sheet steel, hot-rolled, pickled and oiled, of grade AR200, of specification ASTM A6, with a hardness of at least 170 BHN (Brinell Hardness Number) but not exceeding 250 BHN (Brinell Hardness Number), of a thickness of 0.1345 inches (10 gauge), of a width of 60 inches (1524 mm), of a length of 120 inches (3048 mm) |
| 41 | Acier | 7208.52.00.83 | Flat-rolled products of iron or non-alloy steel, in plates, of grade AR200 abrasion resistant, hot rolled, of a thickness of 0.25 inches, of a width of 96 inches, of a length of 240 inches or 288 inches, uncoated. |
| 42 | Acier | 7208.52.00.84 | Flat-rolled products of iron or non-alloy steel, in plates, of grade AR200 abrasion resistant, hot rolled, of a thickness of 0.31 inches, of a width of 120 inches, of a length of 288 inches, uncoated. |
| 43 | Acier | 7210.49.00 | Flat-rolled products of carbon steel, hot-dip galvanized, in coils or cut lengths, of specification GMW3032M-ST-420LA-HDG60G/60G-U, SAE J2340380X 60G60G, SAE J2340 420X 60G60G, or GMW3032-ST-S-340LA-HDG60G/60G-U with a thickness of at least 0.5 mm not exceeding 2.5 mm, with a width exceeding 1575 mm, with a zinc coating |
| 44 | Acier | 7210.49.00.60 | Steel coil, SS grade 33 or 37 to ASTM A653, cold-rolled, hot-dipped, with a thickness of at least 0.0187 inches but not exceeding 0.0296 inches, and with a width of at least 26.88 inches but not exceeding 48.50 inches, with a zinc coating applied with a G90 coating weight |
| 45 | Acier | 7210.49.00.70 | Produits laminés plats, en acier non allié, galvannealed avec un revêtement en alliage zinc-fer, de spécification ASTM A653, d'une largeur d’au moins 942 mm, d'une épaisseur d’au moins 1,06 mm mais n’excédant pas 2,75 mm |
| 46 | Acier | 7210.49.00.70 | Flat-rolled products of iron or non-alloy steel, of grade HR 550-610LA, of specification TM-2011, with a width of at least 600 mm, with a thickness of at least 1 mm but not exceeding 3 mm, with zinc coating or plating |
| 47 | Acier | 7210.49.0040 | Steel sheet in coils (item), of steel (material), with a thickness of 0.079 inch, with a width of 34.055 inches (dimensions), polymer-coated (coating/finish) |
| 48 | Acier | 7210.61.00.10 | Steel coil, of aluminum-zinc alloy, of grade 33, to ASTM A792, hot-dipped, cold-rolled, with a thickness of at least 0.0175 inches but not exceeding 0.0296 inches, and with a width of at least 26.88 inches but not exceeding 48.50 inches, with an AZ50 coating weight |
| 49 | Structures métalliques | 7210.61.00.10 | Flat-rolled sheets, of carbon steel, of specification ASTM A792, of a thickness exceeding 1 mm but less than 1.44mm, of a length of at least 169.2 inches but not exceeding 567 inches, with a aluminum-zinc coating |
| 50 | Acier | 7210.69.00 | Flat-rolled products of carbon steel, hot dip aluminized, in coils or cut lengths, of grade FS Type B T-140, with a nominal thickness of 2.87 mm, with a width of at least 600 mm, with an aluminum-based coating |
| 51 | Acier | 7210.69.0020 | Steel sheet in coils (item), of steel (material), of specification AASHTO M274 and ASTM 929-07 (specification/standard), with a thickness of 0.072 inch, 0.103 inch, or 0.129 inch, with a width of 27.125 inches, 33.6875 inches, or 33.9375 inches (dimensions), aluminized (coating/finish) |
| 52 | Acier | 7210.90.00 | Flat-rolled products, in plates, explosion-bonded, with stainless steel 304L metallurgically bonded to carbon steel substrate, of a width of 75 inches, with thickness of 0.875 inches, corrosion-resistant cladding surface |
| 53 | Acier | 7211.14.00.90 | Steel coil, of ASTM grade 70, hot-rolled, with a thickness of 0.228 inches, and with a width of 11.614 inches, picked and oiled |
| 54 | Acier | 7211.19.00.10 | Non-alloy steel sheet, of ASTM grade 1050, hot-rolled, annealed, with a thickness of 0.132 inches, with a width of 5.500 inches, and with a length of 48.000 inches, pickled and oiled |
| 55 | Acier | 7211.19.00.90 | Flat-rolled products, in coils, of carbon steel, not further worked than hot-rolled, of grade SPH270C, of a thickness of at least 2.43 mm but not exceeding 2.77 mm, with a width of 361.95 mm |
| 56 | Acier | 7211.19.00.90 | Non-alloy steel sheet, of ASTM grade 1050, annealed, hot-rolled, with a thickness of 0.236 inches, with a width of 3.750 inches, and with a length of 48.000 inches, pickled and oiled |
| 57 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 060XF, of a specification SAE J1392, of a thickness of at least 1.42mm but not exceeding 3.40mm, of a width of at least 107.01mm but not exceeding 197.00mm, without coating |
| 58 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 080 XF, of specification SAE J1392, of a thickness of at least 1.96mm but not exceeding 3.90mm, of a width of at least 41.21mm but not exceeding 281.99mm, without coating |
| 59 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 550XF, of specification SAE J2340, of a thickness of at least 1.44mm but not exceeding 4.0mm, of a width of at least 36.00mm but not exceeding 485.01mm, without coating |
| 60 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 060XF/060XLF, of specification SAE J1392, of a thickness of 3.00mm and a width of 1181mm, without coating |
| 61 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 550XRF (with restricted chemistry), of specification J2340, of a thickness of 2.12mm, of a width of 250.80mm, without coating |
| 62 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 050XF, of specification SAE J2340, of a thickness of 3.12mm, of a width of 50.01mm, without coating |
| 63 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 070XF, of specification SAE J1392, of a thickness of at least 2.10mm but not exceeding 3.91mm, of a width of at least 127.76mm but not exceeding 303.80mm, without coating |
| 64 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 1008, of specification SAE J403, of a thickness of at least 1.00mm but not exceeding 3.40mm, of a width of at least 80.00mm but not exceeding 157.12mm, without coating |
| 65 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 1008/1010, of specification SAE J403, of a thickness of at least 1.40mm but not exceeding 3.42mm, with width of at least 50.00mm but not exceeding 186.84mm, without coating |
| 66 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 340XF, of specification SAE J2340, of a thickness of 2.50mm, of a width of 216.00mm, without coating |
| 67 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 420XF, of specification SAE J2340, of a thickness of at least 1.42mm but not exceeding 3.92mm, of a width of at least 76.00mm but not exceeding 240.00mm, without coating |
| 68 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 550XF Mod, of specification SAE J2340, of a thickness of 2.95mm, of a width of at least 159.99mm but not exceeding 187.00mm, without coating |
| 69 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled, of grade 50, ASTM A1011, of a thickness of 2.92mm, of a width of 140.00mm, without coating |
| 70 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade S550MC, of specification EN 10149-2, of a thickness of 1.45mm, of a width of 268.00mm, without coating |
| 71 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 420XF, of a specification SAE J2340, of a thickness of at least 2.96mm but not exceeding 3.22mm, of a width of at least 55mm but not exceeding 63mm, without coating |
| 72 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, picked and oiled of grade 1008/1010, of specification SAE J403, of a thickness of 4.41mm, of a width of 112mm, without coating |
| 73 | Acier | 7211.19.00.90 | Carbon steel, in coils, hot-rolled, pickled and oiled of grade 490XF, of specification SAE J1392, of a thickness of at least 2.42mm but not exceeding 3.12mm, of a width of at least 75.00mm but not exceeding 260.00mm, without coating |
| 74 | Acier | 7211.19.00.90 | Produits laminés plats, en aciers non alliés, en bobines, de grade HSLA 75/85, de spécification ASTM A1008, laminés à chaud, décapés et huilés, avec une épaisseur de 3 mm (calibre 11), avec une largeur de 12,70 mm, non revêtus, avec conditionnement des rives, présentés en bobines oscillées d’un poids d’environ 1500 livres, bobinées sur mandrin, avec une tolérance de cambrure de 2 mm sur une longueur de 2000 mm (ISO 9445-1) |
| 75 | Acier | 7211.23.00 | Flat-rolled products, of carbon steel, not further worked than cold-rolled (cold-reduced), in coils, of grade SPC270E, of a thickness of at least 1.3 mm but not exceeding 2.8 mm, with a width of 130 mm |
| 76 | Acier | 7211.23.00.00 | Carbon steel, in coils, cold-rolled, of grade 050XLF/050XF, of specification SAE J1392, of a thickness of at least 0.99mm but not exceeding 1.50mm, of a width of at least 298.45mm but not exceeding 307.98mm, without coating |
| 77 | Acier | 7211.23.00.00 | Carbon steel, in coils, cold-rolled, of grade 070XF, of specification SAE J1392, of a thickness of at least 2.98mm but not exceeding 5.46mm, of a width of at least 78.00mm but not exceeding 159.87mm, without coating |
| 78 | Acier | 7211.23.00.00 | Carbon steel, in coils, cold-rolled, of grade 1008, of specification SAE J403, of a thickness of at least 1.20mm but not exceeding 1.45mm, of a width of at least 106.00mm but not exceeding 384.94mm, without coating |
| 79 | Acier | 7211.23.00.00 | Carbon steel, in coils, cold-rolled of grade 1008/1010, of specification SAE J403, of a thickness of at least 1.50mm but not exceeding 5.00mm, of a width of at least 50.00mm but not exceeding 145.00mm, without coating |
| 80 | Acier | 7211.23.00.00 | Carbon steel, in coils, cold-rolled, of grade 1008DDQ, of specification SAE 1008 (Deep draw quality) , of a thickness of 1.45mm, of a width of 3384mm, without coating |
| 81 | Acier | 7211.23.00.00 | Carbon steel, in coils, cold-rolled, of grade 1018/1020, of specification SAE or AISI grade 1018 or 1020, ASTGEM A1011 of grade 50, of a thickness of 2.00mm, of a width of 101.09mm, without coating |
| 82 | Acier | 7211.23.00.00 | Carbon steel, in coils, cold-rolled, of grade 550XF Mod, of specification SAE J2340, modified with internal spec MS 000025/MS000024, of a thickness of at least 2.00mm but not exceeding 2.01mm, of a width of at least 98.00mm but not exceeding 234.85mm, without coating |
| 83 | Acier | 7211.29.00.00 | Cold-rolled non-alloy steel coil, of ASTM grade 1074, annealed, with a thickness of 0.053 inches, and with a width of 7.875 inches. |
| 84 | Acier | 7211.29.00.00 | Cold-rolled non-alloy steel coil, of ASTM grade 1095, annealed, with a thickness of 0.070 inches, and with a width of 2.625 inches. |
| 85 | Acier | 7211.29.00.00 | Carbon steel, in coils, cold-rolled, of grade 1045, of specification SAE J403, of a thickness of 1.04mm, of a width of 53.34mm, without coating |
| 86 | Acier | 7211.29.00.00 | Carbon steel, in coils, cold-rolled, of grade 1055, of specification SAE J403, of a thickness of at least 1.10mm but not exceeding 3.03mm, of a width of at least 82.47mm but not exceeding 165.00mm, without coating |
| 87 | Acier | 7211.29.00.00 | Carbon steel, in coils, cold-rolled of grade 040XLF Mod, of specification SAE J1392, of a thickness of 1.45mm, of a width of 384mm, without coating |
| 88 | Acier | 7211.29.00.00 | Flat-rolled products in coils, of carbon steel, not further worked than cold-rolled (cold-reduced), of grade 4130, of specification SAE J404, of a thickness of at least 1.10 but not exceeding 3.99 mm, of a width of at least 46.99mm but not exceeding 267.23mm, uncoated |
| 89 | Acier | 7211.29.00.00 | Flat-rolled products in coils, of carbon steel, not further worked than cold-rolled (cold-reduced), of grade 4130, of specification SAE J404, of a thickness of at least 2.9 mm but not exceeding 3.2 mm, of a width of at least 58 mm but not exceeding 94 mm, uncoated |
| 90 | Acier | 7211.29.00.00 | Flat-rolled products in coils, of carbon steel, not further worked than cold-rolled (cold-reduced), of grade SAE J404 4130, of a thickness of 2.88mm, of a width of 220 mm, uncoated |
| 91 | Acier | 7211.29.00.00 | Flat-rolled products in coils, of carbon steel, not further worked than cold-rolled (cold-reduced), of a grade 4130, of a specification SAE J404, of a thickness of at least 2.49 mm but not exceeding 3.96mm, of a width of at least 107.95 mm but not exceeding 156.01 mm, uncoated |
| 92 | Acier | 7212.20.00.40 | Flat-rolled non-alloy steel, in coils, of grade 040 XF, of a specification of SAE J1392, of a thickness of 1.50mm, of a width of at least 260mm but not exceeding 524mm, coated with zinc |
| 93 | Acier | 7212.30.00.40 | Flat-rolled products, of carbon steel, hot-rolled, of grade LAH420Y480T, with a width of 212.7884 mm, with a thickness of at least 1.905 mm but not exceeding 2.1082 mm, coated with zinc by hot-dip GI60/60 |
| 94 | Acier | 7212.30.00.40 | Flat rolled products, of carbon steel, hot-rolled, of grade LAH420Y480T, with a width of 363.9914 mm, of a thickness of at least 2.8956 mm but not exceeding 3.0988 mm, coated with zinc by hot dipped GI60/60 U |
| 95 | Acier | 7212.30.00.40 | Flat-rolled products, in coils, of non-alloy steel, of grade 420, with a thickness of 2.01 mm, with a width of 224 mm, coated with zinc by the hot-dip process, with a zinc coating of 60 grams per square metre on each surface, not chemically treated and oiled |
| 96 | Acier | 7212.50.00 | Flat-rolled products, of low carbon steel, of grade SAE 1008, in coils, with a thickness of 0.635 mm, with a width of 266.7 mm, plated with brass |
| 97 | Acier | 7212.50.00 | Flat-rolled products, of low carbon steel, of grade SAE 1008, in coils, with a thickness of 0.635 mm, with a width of 149.225 mm, nickel plated |
| 98 | Acier | 7214.10.00 | Bars and rods of iron or non-alloy steel, not further worked than forged, of grades F60 or F51, of a diameter of at least 25 mm but not exceeding 610 mm, of a length of at least 76 mm but not exceeding 4,268 mm |
| 99 | Acier | 7214.20.00.11 | Steel reinforcing rebar, of grade 400W, size 25M, with a length of 18 meters |
| 100 | Acier | 7214.20.00.11 | Steel reinforcing rebar, of grade 400W, size 10M, with a length of 12 meters |
| 101 | Acier | 7214.20.00.11 | Steel reinforcing rebar, of grade 400W, size 15M, with a length of 9 meters |
| 102 | Acier | 7214.20.00.90 | Round reinforcing bars, of carbon steel, of grade ASTM A1035/A1035M, hot-rolled, with a nominal diameter of 10.00 mm, with a length of 18.00 meters, deformed (ribbed), uncoated |
| 103 | Acier | 7214.91.00 | Hot-rolled, pickled and oiled non-alloy steel flat bar, of ASTM grade 1050, annealed, of spring quality, of rectangular cross-section, with a thickness of 0.250 inches, with a width of 5.000 inches, and with a length of 48.000 inches. |
| 104 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 2.362 inches, with a width of 5.276 inches, with a length not exceeding 12 feet, uncoated |
| 105 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 4.00 inches, with a width of 5.00 inches, with a length not exceeding 12 feet, uncoated |
| 106 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot rolled, with a thickness of 4.25 inches, with a width of 5.50 inches, with a length not exceeding 12 feet, uncoated |
| 107 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 4.32 inches, with a width of 5.25 inches, with a length not exceeding 12 feet, uncoated |
| 108 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 4.50 inches, with a width of 5.50 inches, with a length not exceeding 12 feet, uncoated |
| 109 | Acier | 7214.91.00 | Carbon structural steel bars of square cross-section, of grade A36, hot-rolled, of square cross-section with sides of 5.00 inches, with a length not exceeding 12 feet, uncoated |
| 110 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 5.25 inches, with a width of 5.50 inches, with a length not exceeding 12 feet, uncoated |
| 111 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 5.50 inches, with a width of 7.00 inches, with a length not exceeding 12 feet, uncoated |
| 112 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 9.00 inches, with a width of 12.00 inches, with a length not exceeding 12 feet, uncoated |
| 113 | Acier | 7214.91.00 | Carbon structural steel bars, of grade A36, hot-rolled, of square cross-section with sides of 9.00 inches, with a length not exceeding 12 feet, uncoated |
| 114 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 1.75 inches, with a width of 19.685 inches, with a length not exceeding 12 feet, uncoated |
| 115 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 0.25 inches, with a width of 14.00 inches, with a length not exceeding 12 feet, uncoated |
| 116 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 0.25 inches, with a width of 5.00 inches, with a length not exceeding 12 feet, uncoated |
| 117 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 0.50 inches, with a width of 8.00 inches, with a length not exceeding 12 feet, uncoated |
| 118 | Acier | 7214.91.00 | Carbon structural steel bars, of grade A36, hot-rolled, of rectangular cross-section, with a thickness of 2.50 inches, with a width of 2.50 inches, with a length not exceeding 12 feet, uncoated |
| 119 | Acier | 7214.91.00 | Carbon structural steel bars, of grade A36, hot-rolled, of square cross-section with sides of 3.00 inches, with a length not exceeding 12 feet, uncoated |
| 120 | Acier | 7214.91.00 | Carbon structural steel of rectangular cross-section cut from a plate, of grade A36, hot-rolled, with a thickness of 3.00 inches, with a width of 4.00 inches, with a length not exceeding 12 feet, uncoated |
| 121 | Acier | 7214.91.00 | Carbon steel bar, cut from a plate, of grade A516, hot-rolled, with a thickness of 8.00 inches, with a width of 12.00 inches, with a length not exceeding 12 feet, uncoated |
| 122 | Acier | 7214.99.00 | Carbon structural steel bars, square cross-section, of grade A36, hot-rolled, of square cross-section with sides of 4.00 inches, with a length not exceeding 12 feet, uncoated |
| 123 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C11L17, cold-finished, with a thickness of 1.25 inches, with a width of 1.75 inches, with a length not exceeding 12 feet. |
| 124 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C11L17, cold-finished, with a thickness of 1.50 inches, with a width of 2.50 inches, with a length not exceeding 12 feet. |
| 125 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C11L17, cold-finished, with a thickness of 2.50 inches, with a width of 3.50 inches, with a length not exceeding 12 feet. |
| 126 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of hexagonal cross-section with a width across flats of 1.00 inches, with a length not exceeding 12 feet. |
| 127 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of square cross-section with sides of 1.00 inches, with a length not exceeding 12 feet. |
| 128 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of square cross-section with sides of 1.50 inches, with a length not exceeding 12 feet. |
| 129 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, with a thickness of 1.50 inches, with a width of 2.50 inches, with a length not exceeding 12 feet. |
| 130 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of hexagonal cross-section with a width across flats of 1.75 inches, with a length not exceeding 12 feet. |
| 131 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of square cross-section with sides of 1.75 inches, with a length not exceeding 12 feet. |
| 132 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of square cross-section with sides of 2.00 inches, with a length not exceeding 12 feet. |
| 133 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of square cross-section with sides of 2.50 inches, with a length not exceeding 12 feet. |
| 134 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of square cross-section with sides of 2.75 inches, with a length not exceeding 12 feet. |
| 135 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of square cross-section with sides of 3.00 inches, with a length not exceeding 12 feet. |
| 136 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of square cross-section with sides of 3.50 inches, with a length not exceeding 12 feet. |
| 137 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of square cross-section with sides of 4.00 inches, with a length not exceeding 12 feet. |
| 138 | Acier | 7215.10.00 | Leaded free-machining steel bar, of grade C12L14, cold-finished, of square cross-section with sides of 7.00 inches, with a length not exceeding 12 feet. |
| 139 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled with a thickness of 0.1875 inches, with a width of 0.625 inches, with a length not exceeding 12 feet. |
| 140 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled with a thickness of 0.1875 inches, with a width of 2.00 inches, with a length not exceeding 12 feet. |
| 141 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 4.00 inches, with a width of 1.50 inches, with a length not exceeding 12 feet. |
| 142 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 0.25 inches, with a width of 4.00 inches, with a length not exceeding 12 feet. |
| 143 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 0.25 inches, with a width of 6.00 inches, with a length not exceeding 12 feet. |
| 144 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 0.50 inches, with a width of 2.00 inches, with a length not exceeding 12 feet. |
| 145 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 0.50 inches, with a width of 2.50 inches, with a length not exceeding 12 feet. |
| 146 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 0.50 inches, with a width of 3.00 inches, with a length not exceeding 12 feet. |
| 147 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 0.50 inches, with a width of 4.00 inches, with a length not exceeding 12 feet. |
| 148 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 0.50 inches, with a width of 6.00 inches, with a length not exceeding 12 feet. |
| 149 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 0.75 inches, with a width of 4.00 inches, with a length not exceeding 12 feet. |
| 150 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 1.00 inches, with a width of 1.50 inches, with a length not exceeding 12 feet. |
| 151 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 1.00 inches, with a width of 2.00 inches, with a length not exceeding 12 feet. |
| 152 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, with a thickness of 1.25 inches, with a width of 1.50 inches, with a length not exceeding 12 feet. |
| 153 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, of square cross-section with sides of 1.75 inches, with a length not exceeding 12 feet. |
| 154 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 12.75 inches, with a width of 18.00 inches, with a length not exceeding 12 feet. |
| 155 | Acier | 7215.50.00 | Non-alloy steel bars, of grade C1018,cold-finished, of square cross-section with sides of 2.00 inches, with a length not exceeding 12 feet |
| 156 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-finished, with a thickness of 2.00 inches, with a width of 3.00 inches, with a length not exceeding 12 feet. |
| 157 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-finished, with a thickness of 2.00 inches, with a width of 3.50 inches, with a length not exceeding 12 feet. |
| 158 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 2.00 inches, with a width of 4.00 inches, with a length not exceeding 12 feet. |
| 159 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 2.00 inches, with a width of 4.50 inches, with a length not exceeding 12 feet. |
| 160 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 2.00 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 161 | Acier | 7215.50.00 | Non-alloy steel bar, cold-finished, of grade C1018, with a thickness of 2.50 inches, with a width of 3.50 inches, with a length not exceeding 12 feet. |
| 162 | Acier | 7215.50.00 | Non-alloy steel bar, cold-finished, of grade C1018, of square cross-section with sides of 3.00 inches, with a length not exceeding 12 feet. |
| 163 | Acier | 7215.50.00 | Non-alloy steel bar, cold-finished, of grade C1018, with a thickness of 3.00 inches, with a width of 4.00 inches, with a length not exceeding 12 feet. |
| 164 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 3.00 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 165 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 3.00 inches, with a width of 6.00 inches, with a length not exceeding 12 feet. |
| 166 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 3.125 inches, with a width of 4.375 inches, with a length not exceeding 12 feet. |
| 167 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, of square cross-section with sides of 3.50 inches, with a length not exceeding 12 feet. |
| 168 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, with a thickness of 3.50 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 169 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, of square cross-section with sides of 4.00 inches, with a length not exceeding 12 feet. |
| 170 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, of square cross-section with sides of 4.50 inches, with a length not exceeding 12 feet. |
| 171 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, of square cross-section with sides of 5.00 inches, with a length not exceeding 12 feet. |
| 172 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-finished, with a thickness of 6.00 inches, with a width of 3.50 inches, with a length not exceeding 12 feet. |
| 173 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, of square cross-section with sides of 6.00 inches, with a length not exceeding 12 feet. |
| 174 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1018, cold-rolled, of square cross-section with sides of 7.00 inches, with a length not exceeding 12 feet. |
| 175 | Acier | 7215.50.00 | Non-alloy steel bar, of grade C1020, cold-rolled, with a thickness of 2.00 inches, with a width of 10.00 inches, with a length not exceeding 12 feet. |
| 176 | Acier | 7215.50.00.21 | Carbon steel shafting, Turned Ground and Polished, of grade 1045, ASTM A29 / A108, of circular cross-section, with an outer diameter of at least 0.375 inches but not exceeding 6.000 inches, with a length of at least 20 feet but not exceeding 25 feet |
| 177 | Acier | 7216.31.00.21 | U sections, in the form of channel, of non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade GIP80, of a height exceeding 152.4mm, American standard |
| 178 | Acier | 7216.61.00 | Carbon steel profiles, cold-formed, of grade EN 10162:2003, of specification EN 10346, open and closed sections of L-section, U-section or box shape, with a wall thickness of at least 1.5 mm but not exceeding 4 mm, with a width of at least 10 mm but not exceeding 90 mm, with a height of at least 10 mm but not exceeding 90 mm, with a length of at least 6.0 meters but not exceeding 6.7 meters, galvanized |
| 179 | Acier | 7217.10.00 | Wire, of iron or non-alloy steel, not plated or coated, of a diameter of at least 3.18 mm but not exceeding 3.18 mm (nominal diameter), in coil form, for use in the manufacture of compression, extension or torsion springs |
| 180 | Acier | 7217.20.00 | Wire, of iron or non-alloy steel, plated or coated with zinc, of a diameter of at least 2.67 mm but not exceeding 2.67 mm (nominal diameter), in coil form, for use in the manufacture of compression, extension or torsion springs |
| 181 | Acier | 7217.90.00.20 | Double loop wire, also known as wire-O binding wire, of iron or steel wire, formed into continuous double-loop configurations, whether supplied on continuous spools or cut to length, with a loop pitch of 2:1 or 3:1, with a loop diameter of at least 6.35 millimetres but not exceeding 31.75 millimetres, with a surface finish that is plain, painted or coated, for use in the binding of notebooks, calendars and similar printed products |
| 182 | Acier | 7219.33.00.10 | Flat-rolled products of stainless steel, of grade 304, not further worked than cold-rolled (cold-reduced) |
| 183 | Acier | 7219.33.00.90 | Flat-rolled products of stainless steel, of grades 400-series including grade 430 or equivalent, not further worked than cold-rolled (cold-reduced), of a thickness of at least 1 mm but not exceeding 3 mm, of a width of 600 mm or more, with a polished finish of No. 4 or equivalent |
| 184 | Acier | 7219.34.00.90 | Flat-rolled products of stainless steel, of grades 400-series including grade 430 or equivalent, not further worked than cold-rolled (cold-reduced), of a thickness of at least 0.5 mm but not exceeding 1 mm, of a width of 600 mm or more, with a polished finish of No. 4 or equivalent |
| 185 | Acier | 7220.12.00.00 | N/A |
| 186 | Acier | 7220.20.00 | Produits laminés plats, en acier inoxydable, en bobines, de grade 304, de spécification ASTM A276, laminés à froid, recuits, avec une épaisseur de calibre 11, avec une largeur de 12,70 mm, avec des rives entièrement arrondies, présentés en bobines oscillées d’un poids d’environ 1500 livres, bobinées sur mandrin, avec une finition 2B, avec une tolérance de cambrure de 2 mm sur une longueur de 2000 mm (ISO 9445-1) |
| 187 | Acier | 7223.00.00 | Stainless steel wire, of grade 347, in a standard seam-free coil configuration, with a diameter of 0.386 inches, certified for chemistry only to AMS 5646, with a tensile strength of at least 85 KSI but not exceeding 125 KSI, with a copper coating. |
| 188 | Acier | 7223.00.00 | Stainless steel wire, of grade 347, cold-formed and annealed with a 4% skin pass, with a diameter of 0.468 inches, certified for chemistry only to AMS 5646, with a clean and soap coating. |
| 189 | Acier | 7223.00.00 | Stainless steel wire, of grade 347, in a standard seam-free coil configuration, with a diameter of 0.468 inches, certified for chemistry only to AMS 5646, with a tensile strength of at least 85 KSI but not exceeding 125 KSI, with a copper coating. |
| 190 | Acier | 7223.00.00 | Stainless steel wire, of grade 431, cold drawn, skin passed, and seam-free, with a diameter of 0.205 inches, compliant with DFARS, certified to ASTM A493, AMS 5628F (mechanical properties, 431) and AMS 5628F (cold heading), with a maximum tensile strength of 115 KSI, with copper and techcoat coatings, and with a super finish. |
| 191 | Acier | 7223.00.00 | Stainless steel wire, of grade 431, of cold heading quality wire in a Class 2 condition, annealed, and seam-free, with a diameter of 0.247 inches, certified to ASTM A493, with a maximum tensile strength of 105 KSI, with a strand copper and soap coating. |
| 192 | Acier | 7223.00.00 | Stainless steel wire, of grade 431, cold drawn, skin passed, and seam-free, with a diameter of 0.255 inches, compliant with DFARS, certified to ASTM A493-09 (reapproved 2013), MIL-S-18732D (capable of modified nickel per Notice 1 dated 03/19/91), AMS 5628F (431) and AMS 5628F (cold heading), with a maximum tensile strength of 105 KSI, with copper and techcoat coatings, and with a super finish. |
| 193 | Acier | 7223.00.00 | Stainless steel wire, of grade 431, of cold heading quality, skin passed, and seam-free, with a diameter of 0.325 inches, certified to MIL-S-18732D (except with a minimum nickel content of 1.5%), with a maximum tensile strength of 105 KSI, with copper and techcoat coatings. |
| 194 | Acier | 7223.00.00 | Stainless steel wire, of grade 431, skin passed and seam-free, with a diameter of 0.385 inches, certified to ASTM A493, with a maximum tensile strength of 115 KSI, with copper and techcoat coatings. |
| 195 | Acier | 7223.00.00 | Stainless steel wire, of grade 431, of cold heading quality, cold drawn, and seam-free, with a diameter of 0.472 inches, compliant with DFARS, certified to AMS 5628F (431, cold heading) and AMS 5628F (431), with a maximum tensile strength of 115 KSI, with a copper coating and soap coat, and with a super finish. |
| 196 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, solution annealed, seam-free, cold-finished, of heading quality, of Class K2, with a diameter of 0.150 inches, compliant with DFARS, certified to AMS 5853 and capable of AMS 5731M and AMS 5737R, with a tensile strength of at least 95.0 KSI but not exceeding 110.0 KSI, with copper and soap coatings. |
| 197 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, solution annealed, of aerospace grade, with a diameter of 0.193 inches, compliant with DFARS, certified to AMS 5731 and certified for chemistry only to AMS 5853, with a maximum tensile strength of 105 KSI, with a copper pre-coat, and with a super finish. |
| 198 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, solution annealed, of aerospace grade, with a diameter of 0.193 inches, compliant with DFARS, certified to AMS 5731 and certified for chemistry only to AMS 5853, with a maximum tensile strength of 105 KSI, with a miraflex coating, and with a super finish. |
| 199 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, solution annealed, of aerospace grade, with a diameter of 0.205 inches, compliant with DFARS, certified to AMS 5731 and certified for chemistry only to AMS 5853, with a maximum tensile strength of 105 KSI, with a copper pre-coat, and with a super finish. |
| 200 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, solution annealed, of aerospace grade, with a diameter of 0.205 inches, compliant with DFARS, certified to AMS 5731 (capable of AMS 5732, AMS 5734, and AMS 5737) and certified for chemistry only to AMS 5853, with a tensile strength of at least 90 KSI but not exceeding 105 KSI, with a miraflex coating. |
| 201 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, annealed at final size, of commercial quality, with a diameter of 0.205 inches, certified for chemistry to ASTM A453 Grade 660 (and capable of full ASTM A453 Grade 660 compliance), and certified for chemistry only to AMS 5731, AMS 5732, AMS 5734, and AMS 5737, with a tensile strength of at least 95 KSI but not exceeding 105 KSI, with a soap pre-coat. |
| 202 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, solution annealed, of aerospace grade, with a diameter of 0.215 inches, compliant with DFARS, certified to AMS 5731 and certified for chemistry only to AMS 5853, with a maximum tensile strength of 105 KSI, with a copper pre-coat, and with a super finish. |
| 203 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, solution annealed, of aerospace grade, with a diameter of 0.255 inches, compliant with DFARS, certified to AMS 5731 (capable of AMS 5732, AMS 5734, and AMS 5737) and certified for chemistry only to AMS 5853, with a tensile strength of at least 90 KSI but not exceeding 105 KSI, with a miraflex coating. |
| 204 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, annealed, of aircraft quality, with a diameter of 0.255 inches, compliant with DFARS, certified to AMS 5731 (capable of AMS 5732, AMS 5734, AMS 5737, and AMS 5853 for chemistry only), with a maximum tensile strength of 105 KSI, with a copper coating. |
| 205 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, annealed at final size, of commercial quality, with a diameter of 0.270 inches, certified for chemistry to ASTM A453 Grade 660 (and capable of full ASTM A453 Grade 660 compliance), with chemistry per AMS 5731, AMS 5853, AMS 5732, AMS 5734, and AMS 5737, with a tensile strength of at least 95 KSI but not exceeding 105 KSI, with a miraflex and soap pre-coat. |
| 206 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, solution annealed, of aerospace grade, with a diameter of 0.318 inches, compliant with DFARS, certified to AMS 5731 (capable of AMS 5732, AMS 5734, and AMS 5737) and certified for chemistry only to AMS 5853, with a tensile strength of at least 90 KSI but not exceeding 105 KSI, with a miraflex coating. |
| 207 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, annealed, of aircraft quality, with a diameter of 0.318 inches, compliant with DFARS, certified to AMS 5731 (capable of AMS 5732, AMS 5734, AMS 5737, and AMS 5853 for chemistry only), with a maximum tensile strength of 105 KSI, with a copper coating. |
| 208 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, annealed at final size, of commercial quality, with a diameter of 0.318 inches, certified for chemistry to ASTM A453 Grade 660 (and capable of full ASTM A453 Grade 660 compliance), with chemistry per AMS 5731, AMS 5853, AMS 5732, AMS 5734, and AMS 5737, with a tensile strength of at least 95 KSI but not exceeding 105 KSI, with a soap pre-coat. |
| 209 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, annealed, of aircraft quality, with a diameter of 0.325 inches, compliant with DFARS, certified to AMS 5731 (capable of AMS 5732, AMS 5734, AMS 5737, and AMS 5853 for chemistry only), with a maximum tensile strength of 105 KSI, with a miraflex coating. |
| 210 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, annealed at final size, of commercial quality, with a diameter of 0.390 inches, certified for chemistry to ASTM A453 Grade 660 (and capable of full ASTM A453 Grade 660 compliance), with chemistry per AMS 5731, AMS 5853, AMS 5732, AMS 5734, and AMS 5737, with a tensile strength of at least 95 KSI but not exceeding 105 KSI, with a soap pre-coat. |
| 211 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, annealed, of aircraft quality, with a diameter of 0.468 inches, compliant with DFARS, certified to AMS 5731 (capable of AMS 5734, AMS 5732 or AMS 5737, and AMS 5853 for chemistry only), with a maximum tensile strength of 105 KSI, with a copper coating. |
| 212 | Acier | 7223.00.00 | Stainless steel wire, of grade A286, seam-free, annealed, of aircraft quality, with a diameter of 0.472 inches, compliant with DFARS, certified to AMS 5731 (capable of AMS 5734, AMS 5732 or AMS 5737, and AMS 5853 for chemistry only), with a maximum tensile strength of 105 KSI, with a copper coating. |
| 213 | Acier | 7225.30.00 | Flat-rolled products of carbon steel, hot-rolled and pickled, in coils, of specification JIS G3134 SPFH 590 Modified or M2021-SP251-590, with a nominal thickness of 0.98 inches, with a width exceeding 44.925 inches, uncoated |
| 214 | Acier | 7225.30.00 | Flat-rolled products of carbon steel, hot-rolled and pickled, in coils, of specification HSLA S500MC EN 10149-2, with a nominal thickness of 0.0709 inches, with a width exceeding 890 mm, uncoated |
| 215 | Acier | 7225.30.00.00 | Flat-rolled products, of other alloy steel, not further worked than hot-rolled, of grade 100XF, in coils, with a thickness of at least 4.76 mm but not exceeding 12.7 mm, of a width exceeding 1525 mm but not exceeding 1830 mm |
| 216 | Acier | 7225.40.00 | Alloy steel plates, of grade SA517B, of ASME pressure vessel specification, with a thickness of at least 6.35 mm but not exceeding 11.38 mm, with a width of at least 1828.80 mm but not exceeding 3048 mm, uncoated, black steel |
| 217 | Acier | 7225.40.00.10 | Flat-rolled products, in plates, not further worked than hot-rolled, heat treated, of grade ASTM A514, of specification LS1133576, of a thickness of at least 31.7 mm but not exceeding 152.5 mm |
| 218 | Acier | 7225.40.00.10 | Flat-rolled products, in plates, not further worked than hot-rolled, heat treated, of other alloy steel , of grade ASTM A514 Grade Q, with a thickness of at least 4.76 mm but not exceeding 152.4 mm |
| 219 | Acier | 7225.92.00 | Flat-rolled products, of other alloy steel, in coils, of grade DPC340Y590T, with a thickness of at least 1.0 mm but not exceeding 2.4 mm, with a width of at least 600 mm but not exceeding 1,700 mm, galvanized |
| 220 | Acier | 7225.99.00 | Flat-rolled products, of other alloy steel, in coils, of grades PH-350Y-550T-SH, PQS370Y550T, HF-800-950, PHS800Y1000T, 950Y1300T, HQAS1500H, WSS-M1A357, or GMW14400, with a thickness of at least 1.0 mm but not exceeding 2.4 mm, with a width of at least 600 mm but not exceeding 1,700 mm, aluminum-silicon coated |
| 221 | Acier | 7225.99.00 | Flat-rolled products, of other alloy steel, in coils, of grades AMPS T1 or HS1300T/950Y, with a thickness of at least 1.0 mm but not exceeding 2.4 mm, with a width of at least 600 mm but not exceeding 3,000 mm, aluminum-silicon coated |
| 222 | Acier | 7225.99.00 | Flat-rolled products of carbon steel, hot dip aluminized, in coils or cut lengths, of grade FS Type BT-140, with a nominal thickness of 2.87 mm, with a width of at least 600 mm, with an aluminum-based coating |
| 223 | Acier | 7226.92.00 | Cold-rolled alloy steel coil, of ASTM grade 4130, annealed, with a thickness of 0.060 inches, and with a width of 2.000 inches. |
| 224 | Acier | 7226.92.00 | Flat-rolled products, of high carbon steel, not further worked than cold-rolled (cold-reduced), of grade SAE 1074-1080, in coils, with a thickness of 1.397 mm, of a width of at least 214.63 mm but not exceeding 217.17 mm with a thickness of 1.397 mm, of a width of at least 214.63 mm but not exceeding 217.17 mm |
| 225 | Acier | 7226.92.00 | Flat-rolled products, of high carbon steel, not further worked than cold-rolled (cold-reduced), of grade SAE 1074-1080, in coils, with a thickness of 1.397 mm, of a width of at least 199.898 mm but not exceeding 200.152 mm |
| 226 | Acier | 7226.92.00 | Flat-rolled products, of high carbon steel, not further worked than cold-rolled (cold-reduced), of grade SAE 1074-1080, in coils, with a thickness of 1.651 mm, with a width of 101.6mm |
| 227 | Acier | 7226.99.00 | Flat-rolled products, of other alloy steel, of grade PQS370Y550T, in coils, with a thickness of at least 1.0 mm but not exceeding 2.4 mm, with a width of at least 300 mm but not exceeding 599 mm, aluminum-silicon coated |
| 228 | Acier | 7226.99.00 | Flat-rolled products, of other alloy steel, in coils, of grades HF-800-950, PH-350Y-550T-SH, HQAS1500H, or 950Y1300T, with a thickness of at least 1.0 mm but not exceeding 2.4 mm, with a width of at least 294 mm but not exceeding 599 mm, aluminum-silicon coated |
| 229 | Acier | 7226.99.00 | Flat-rolled products, of other alloy steel, in coils, of grade DPC340Y590T, with a thickness of at least 1.0 mm but not exceeding 2.4 mm, with a width of at least 294 mm but not exceeding 599 mm, galvanized |
| 230 | Acier | 7226.99.00 | Flat-rolled products of other alloy steel, hot-dip galvanized, in coils or cut lengths, of specification FCA 50002-LAC550Y620T G-40, with a thickness of 0.5 mm or more, with a width not exceeding 600 mm, coated with zinc |
| 231 | Acier | 7226.99.00 | Flat-rolled products, of other alloy steel, in coils or cut lengths, hot-dip galvanized, of grades 980T/700Y-DP, 980T/700Y-MP, 980T/700Y-TRIP or TRIP1180, with a thickness of at least 0.5 mm, with a width not exceeding 600 mm, coated with zinc |
| 232 | Acier | 7226.99.00 | Flat-rolled coils, sheets and plates of other alloy steel, with a width less than 600mm, of a thickness of at least 0.45mm but not exceeding 4mm, electrolytically plated or coated with zinc |
| 233 | Acier | 7226.99.00 | Flat-rolled coils, sheets and plates, of alloy steel, with a width of less than 600 mm, of a thickness of at least 0.45 mm but not exceeding 4.00 mm, electrolytically plated or coated with zinc |
| 234 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 1.50 inches, with a width of 2.50 inches, with a length not exceeding 12 feet. |
| 235 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 1.75 inches, with a width of 2.50 inches, with a length not exceeding 12 feet. |
| 236 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 2.00 inches, with a width of 2.25 inches, with a length not exceeding 12 feet. |
| 237 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, of square cross-section with sides of 2.50 inches, with a length not exceeding 12 feet. |
| 238 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 3.00 inches, with a width of 10.00 inches, with a length not exceeding 12 feet. |
| 239 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 3.00 inches, with a width of 3.00 inches, with a length not exceeding 12 feet. |
| 240 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 4.00 inches, with a width of 6.25 inches, with a length not exceeding 12 feet. |
| 241 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 3.00 inches, with a width of 7.00 inches, with a length not exceeding 12 feet. |
| 242 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 4.00 inches, with a width of 4.00 inches, with a length not exceeding 12 feet. |
| 243 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 4.00 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 244 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 5.00 inches, with a width of 5.50 inches, with a length not exceeding 12 feet. |
| 245 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 5.00 inches, with a width of 7.25 inches, with a length not exceeding 12 feet. |
| 246 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, of square cross-section with sides of 2.00 inches, with a length not exceeding 12 feet. |
| 247 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 2.00 inches, with a width of 4.00 inches, with a length not exceeding 12 feet. |
| 248 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, of square cross-section with sides of 4.50 inches, with a length not exceeding 12 feet. |
| 249 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 4.75 inches, with a width of 4.75 inches, with a length not exceeding 12 feet |
| 250 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bar of grade 4140, heat treated decarb free, hot-rolled, with a thickness of 4.75 inches, with a width of 5.25 inches, with a length not exceeding 12 feet |
| 251 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bars, of grade 4140, heat treated decarb free, hot-rolled, annealed, of rectangular cross-section, with a thickness of 5.00 inches, with a width of 6.50 inches, with a length not exceeding 12 feet |
| 252 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bars, of grade 4140, heat treated decarb free, hot-rolled, of square cross-section with sides of 4.50 inches, with a Rockwell C hardness of at least 28 but not exceeding 32, with a length not exceeding 12 feet |
| 253 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bars, of grade 4140, heat treated decarb free, hot-rolled, of rectangular cross-section, with a thickness of 1.50 inches, with a width of 2.50 inches, with a length not exceeding 12 feet |
| 254 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bars, of grade 4140, heat treated decarb free, hot-rolled, of square cross-section with sides of 1.75 inches, with a length not exceeding 12 feet |
| 255 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bars, of grade 4140, heat treated decarb free, hot-rolled, of rectangular cross-section, with a thickness of 4.00 inches, with a width of 5.00 inches, with a length not exceeding 12 feet |
| 256 | Acier | 7228.30.00 | Chromium-molybdenum alloy steel bars, of grade 4140, heat treated decarb free, hot-rolled, of square cross-section with sides of 5.00 inches, with a length not exceeding 12 feet |
| 257 | Acier | 7228.30.00 | Other bars and rods, of non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade C1045, of a diameter of 1.5 inches, 2 inches, 3 inches or 3.5 inches, with a length of 20 feet |
| 258 | Acier | 7228.30.00 | Other bars and rods, of non-alloy steel, not further worked than hot-rolled, hot drawn or extruded, of grade C1045, of specification ASTM A108 SRA, with a diameter of 0.75 inches, with a length of 20 feet |
| 259 | Acier | 7228.30.00.71 | Other round bars, of other alloy steel, hot-rolled, of grade ASTM A193 Grade B16, with a nominal diameter of 2.00 inches, of a length of at least 210 inches but not exceeding 288 inches, uncoated |
| 260 | Acier | 7228.40.00 | Bars and rods of other alloy steel, not further worked than forged, of grade 4140, of a diameter of at least 25 mm but not exceeding 610 mm, of a length of at least 76 mm but not exceeding 4268 mm |
| 261 | Acier | 7228.50.00.90 | Alloy steel hexagon bar, of grades 4140/4142, annealed or liquid polymer annealed, of specification ASTM A108, cold finished, of an across-flats dimension not exceeding 4.00 inches, of lengths not exceeding 12 feet |
| 262 | Acier | 7228.60.00.00 | Alloy steel shafting, Turned Ground and Polished, of grade 4140, ASTM A29 / A108, ASTM A322 / A193 B7, with an outer diameter of not less than 0.375 inches and not exceeding 6.000 inches, with a length of not less than 20 feet and not exceeding 25 feet |
| 263 | Acier | 7228.70.00.99 or 7214.91.00 | Hot rolled steel bar, of grade 50, of specification ASTM A529, with a thickness of 9.525 mm, with a width of 63.5 mm, with a length of 7366 mm |
| 264 | Acier | 7229.90.90 | Alloy steel wire, of grade 8740, of specification AMS 2301, AMS 6322, and MIL-S-6049, silicon-killed with fine grain, spheroidized annealed, with a diameter of 0.167 inches, with zinc phosphate and lime and stearate coating. |
| 265 | Acier | 7229.90.90 | Alloy steel wire, of grade 8740, of specification AMS 2301, AMS 6322, and MIL-S-6049, silicon-killed with fine grain, spheroidized annealed, with a diameter of 0.193 inches, with zinc phosphate and lime and stearate coating. |
| 266 | Acier | 7229.90.90 | Alloy steel wire, of grade 8740, of specification AMS 2301, AMS 6322 and MIL-S-6049, silicon-killed with fine grain, spheroidized annealed, with a diameter of 0.253 inches, with a zinc phosphate and lime and stearate coating. |
| 267 | Acier | 7229.90.90 | Alloy steel wire, of grade 8740, of specification AMS 2301, AMS 6322, and MIL-S-6049, silicon-killed with fine grain, sheroidized annealed, with a diameter of 0.270 inches, with a zinc phosphate and lime and searate coating. |
| 268 | Acier | 7229.90.90 | Alloy steel wire, of grade 8740, of specification AMS 2301, AMS 6322, and MIL-S-6049, silicon-killed with fine grain, sheroidized annealed, with a diameter of 0.315 inches, with a zinc phosphate and lime and searate coating. |
| 269 | Acier | 7229.90.90 | Alloy steel wire, of grade 8740, of specification AMS 2301, AMS 6322, and MIL-S-6049, silicon-killed with fine grain, sheroidized annealed, with a diameter of 0.325 inches, with a zinc phosphate and lime and searate coating. |
| 270 | Acier | 7229.90.90 | Alloy steel wire, of grade 8740, of specification AMS 2301, AMS 6322, and MIL-S-6049, silicon-killed with fine grain, sheroidized annealed, with a diameter of 0.380 inches, with a zinc phosphate and lime and searate coating. |
| 271 | Acier | 7229.90.90 | Alloy steel wire, of grade 8740, of specification AMS 2301, AMS 6322, and MIL-S-6049, silicon-killed with fine grain, sheroidized annealed, with a diameter of 0.390 inches, with a zinc phosphate and lime and searate coating. |
| 272 | Matériaux ferroviaires | 7302.30.10.00 | Switch blades, crossing frogs, point rods and other crossing pieces, of iron or steel, for use with grooved or girder guard rail |
| 273 | Matériaux ferroviaires | 7302.40.00 | Railroad Tie Plates made of either rolled steel or cast ductile iron of width of at least 7.75 inches but not exceeding 7.75 inches, of length of at least 15 inches but not exceeding 16.188 inches, compatible with various resilient fasteners as recommended by AREMA Manual of Railway Engineering Chapter 30. |
| 274 | Matériaux ferroviaires | 7302.40.00.00 | Fish-plates and sole plates, of iron or steel, for railway or tramway track construction |
| 275 | Matériaux ferroviaires | 7302.90.00 | Rail Anchors meeting requirements of AREMA Manual of Railway Engineering Chapter 5, Section 7.1.4 for rail sections 136RE, 132RE, and 115RE |
| 276 | Matériaux ferroviaires | 7302.90.00.00 | Check-rails and rack rails, sleepers (cross-ties), chairs, chair wedges, rail clips, bedplates, ties and other material specialized for jointing or fixing rails, of iron or steel, for railway or tramway track construction |
| 277 | Acier | 7304.31.00 | Carbon steel mechanical tubes, Drawn Over Mandrel, of grades 1020, 1026, ST52, ST52.3- 520, E355- 520, A513 Type 5, A106. A519, Microhoned, Chrome OD, Chrome ID, or Nitro finish, with an outer diameter of 0.500 to 10.000 inches, with a maximum wall thickness of 0.625 inches, with a length of not less than 18 feet and not exceeding 25 feet |
| 278 | Acier | 7304.31.00.10 | Carbon steel mechanical tubes, Cold-Drawn Seamless, of grade 1026, ASTM A519, with an outer diameter of at least 2.500 but not exceeding 12.000 inches, with a wall thickness of at least 0.500 but not exceeding 1.250 inches, with a length of at least 20 feet but not exceeding 25 feet |
| 279 | Acier | 7304.39.00 | Hot-finished seamless mechanical tubing, of carbon steel, of grade 1026, ASTM A519, with an outer diameter of at least 3.000 inches but not exceeding 18.000 inches, with a wall thickness of at least 0.500 inches but not exceeding 4.000 inches, with a length of at least 20 feet but not exceeding 25 feet |
| 280 | Acier | 7305.12.00.33 | Other pipes, of carbon steel, of grade X70, of specification API 5L, with an outside diameter of 508 mm, with a wall thickness of 7.3 mm, uncoated, of a kind used for oil and gas |
| 281 | Acier | 7305.39.00.30 | Steel pipe piles, spiral welded, of grade A252, with an outer diameter of 48” or 72”, and a length between 25’ to 75’ inclusive |
| 282 | Acier | 7306.30.00 | Other tubing, electric resistance welded, of carbon steel, of circular cross-section, of specification SAE J526, with an outer diameter of 0.3125 inches, with a wall thickness of 0.030 inches, with a length of 7.00 inches, with a light oil finish, with deburred ends |
| 283 | Acier | 7306.30.00 | Other tubing, electric resistance welded, of carbon steel, of circular cross-section, of specification SAE J526, with an outer diameter of 0.250 inches, with a wall thickness of 0.035 inches, with a length of 8.871 inches, with light oil finish, with deburred ends |
| 284 | Acier | 7306.30.00.43 | Electrical Metallic Tubing (EMT) conduit of steel, welded, of ASTM A568 specification, of circular cross-section, of UL797 standard or equivalent, with a wall thickness of at least 1.06 mm but not exceeding 1.75 mm, with an external diameter not exceeding 60.325 mm, in-line galvanized with a zinc coating exterior, clear polymer coating exterior, with an interior of polymer coating |
| 285 | Acier | 7306.30.00.45 | Welded circular tube, of iron or non-alloy steel, of grade STAM 540 GA (equivalent to SGLC400), G60 Galvanized, longitudinally seam welded, with an outer diameter of 50.8 mm, with an inner diameter of 47.6 mm, with a wall thickness of 1.6 mm, with a length of 980 mm, compliant with ASME Y14.5-2009 dimensional standards |
| 286 | Acier | 7306.30.00.45 | Rigid tubing of steel, welded , of ASTM A568 specification, with threaded ends, of circular cross-section, of UL6 standard or equivalent, with a wall thickness of at least 2.625 mm but not exceeding 3.75 mm, with an external diameter not exceeding 60.325 mm, with a hot dipped galvanized exterior and interior with a zinc coating. |
| 287 | Acier | 7306.30.00.53 | Electrical Metallic Tubing (EMT) conduit of steel, welded, of ASTM A568 specification, of circular cross-section, of UL797 standard or equivalent, with a wall thickness of at least 1.60 mm but not exceeding 2.25 mm, with an external diameter of 60.325 mm but not exceeding 168.28 mm, in-line galvanized with a zinc coating exterior, clear polymer coating exterior, with an interior of polymer coating |
| 288 | Acier | 7306.30.00.55 | Rigid tubing of steel, welded, of ASTM A568 specification, with threaded ends, of circular cross-section, of UL6 standard or equivalent, with a wall thickness of 4.85 mm but not exceeding 6.85 mm, with an external diameter of at least 60.325 mm but not exceeding 168.28mm, with a hot-dipped galvanized exterior and interior with a zinc coating. |
| 289 | Acier | 7306.30.00.59 | Electric resistance welded carbon steel tubing, of circular cross-section, of grade C-1006 or C-1008, of specification ASTM A787, with a wall thickness of 1.5494 mm, of an external diameter of at least 60.325 mm but not exceeding 127 mm, with a length of up to 3048 mm, with aluminum-silicon alloy coating. |
| 290 | Acier | 7306.40.00 | Electric resistance welded stainless steel tubing, of circular cross-section, manufactured from stainless steel and supplied with a wall thickness of 1.5494mm, various outside diameters greater then 25.3mm and less then 127mm with a length up to 3048mm |
| 291 | Acier | 7306.40.00 | Welded tubes of stainless steel, in coils or straight lengths, of a kind known as capillary line, not further worked than cold-drawn or cold-rolled, of an outside diameter not exceeding 12 mm, of specification ASTM A269, ASTM A213 or equivalent, suitable for use in instrumentation or fibre optic applications in oil and gas wells |
| 292 | Acier | 7306.40.00.20 | Stainless-steel welded tubes of circular cross-section, of grades 304/304L, 316/316L, 409/409AL, 439/439AL, or 441/441AL, of specifications ASTM A270, ASTM A240, or ASTM A554, with an outside diameter of at least 25.3 mm but not exceeding 114.9 mm, with a wall thickness of at least 0.7 mm but not exceeding 6.0 mm, with a length of at least 35 mm but not exceeding 7,250 mm |
| 293 | Acier | 7306.40.00.30 | Stainless-steel welded tubes of circular cross-section, of grades 304/304L, 316/316L, 409/409AL, 439/439AL, or 441/441AL, of specifications ASTM A270, ASTM A240, or ASTM A554, with an outside diameter exceeding 114.9 mm, with a wall thickness of at least 1.4 mm but not exceeding 17.0 mm, with a length of at least 50 mm but not exceeding 6,125 mm |
| 294 | Acier | 7307.21.00.00 | Weld-equivalent mechanical pipe connector, of stainless steel, with a 150 B16.5 flanged end, compatible with pipes with a nominal pipe size (NPS) of at least 0.25 inches but not exceeding 4.00 inches |
| 295 | Acier | 7307.21.00.00 | Weld neck pipe flanges, of stainless steel, of grades 304 and 304H (UNS S30400 and S30409), of specification ASME B16.5, forged and machined with an adjusted bevel, with a nominal pipe size of 4 inches, with a Class 300 pressure rating |
| 296 | Acier | 7307.29.99.00 | Weld-equivalent mechanical pipe connector, of 316 stainless steel, compatible with pipes with a nominal pipe size (NPS) of at least 0.25 inches but not exceeding 4.00 inches |
| 297 | Acier | 7307.99.00.21 | Weld-equivalent mechanical pipe connector, of carbon steel or alloy steel, compatible with pipes with a nominal pipe size (NPS) of at least 0.25 inches but not exceeding 4.00 inches |
| 298 | Acier | 7308.30.00 | Steel four‑fold door, power operated, interior mounted, comprising cold‑rolled steel sheeting and a steel tube frame of specification ASTM A500 Grade B with fiberglass insulation, with a width of 12 ft 2 in (3700 mm) and a height of 19 ft 6 in (6000 mm). |
| 299 | Acier | 7308.30.00 | Structures and parts of structures, of iron or steel, fabricated and assembled, for use as security fencing systems, with a galvanized, painted or otherwise coated finish |
| 300 | Acier | 7308.30.00.29 | Stainless steel rolling fire door, power operated, interior mounted, comprising 22‑gauge flat slats with stainless steel interior and exterior, with a width of 7 ft 10.5 in (2400 mm) and a height of 7 ft 10.5 in (2400 mm) |
| 301 | Acier | 7308.90.00 | Fabricated iron or steel structures and parts of structures, namely overhead sign support structures (gantries/cantilevers), security fencing structures, pedestrian pathway railing structures, and inspection access platform structures. |
| 302 | Structures métalliques | 7308.90.00.60 | Structural angle brace for use in a pre-engineered steel building structure, of carbon steel, of specification ASTM A792, with a gauge of 0.250 inches, with a length of 216 inches, with paint or galvanized paint finish |
| 303 | Structures métalliques | 7308.90.00.60 | Structural C-channel for use in a pre-engineered steel building structure of carbon steel, roll-formed from ASTM A792 steel, with lengths of at least 79.2 inches but not exceeding 360 inches, with painted or galvanized and painted finish |
| 304 | Structures métalliques | 7308.90.00.60 | Built-up structural steel column for use in the primary frame of a pre-engineered steel building, of carbon steel, of ASTM A792 steel, with lengths of 531.6 inches or 567 inches, with paint or galvanized and painted finish |
| 305 | Structures métalliques | 7308.90.00.60 | Wide flange crane beams, of carbon steel, with lengths of at least 175.2 inches but not exceeding 424.8 inches, with painted or galvanized-and-painted finish |
| 306 | Structures métalliques | 7308.90.00.60 | Steel decking, of carbon steel conforming to ASTM A792, with lengths of at least 97.2 inches but not exceeding 396 inches, with painted or galvanized-and-painted finish |
| 307 | Structures métalliques | 7308.90.00.60 | Structural hollow square tube members for use in the frame of a pre-engineered steel building of carbon steel, of specification ASTM A500, with a length not exceeding 300 inches, with painted or galvanized and painted finish |
| 308 | Structures métalliques | 7308.90.00.60 | Fabricated hot rolled carbon steel structural members, ASTM A36, for use as framed opening headers and jambs in a pre-engineered steel building structure, of carbon steel, hot-rolled, of ASTM A36, of a length of at least 78 inches but not exceeding 360 inches |
| 309 | Structures métalliques | 7308.90.00.60 | Structural Rigid Frames for use in a pre-engineered steel building structure, of carbon steel, of specification ASTM A792, of a length of at least 108 inches but not exceeding 420 inches, with painted or galvanized-and-painted finish |
| 310 | Structures métalliques | 7308.90.00.60 | Sheet metal panels for use as roof and wall cladding in a pre-engineered steel building system, of carbon steel, of specification ASTM A572, of a length of at least 129.6 inches but not exceeding 264 inches, with aluminum-zinc alloy coating |
| 311 | Structures métalliques | 7308.90.00.60 | Structural Z-girders used as secondary framing members in a pre-engineered steel building structure, of carbon steel, of specification ASTM A792, of a length of at least 217.2 inches but not exceeding 456 inches, with painted or galvanized-and-painted finish |
| 312 | Acier | 7308.90.00.99 | Panneaux plats, embossés, en acier non allié, découpés et formés à froid, fabriqués à partir de tôle d’acier conforme à la norme ASTM A653, de type DDS Type A, d’une largeur de 942 mm ou plus, avec revêtement galvanneal (alliage zinc-fer) |
| 313 | Acier | 7308.90.00.99 | Insulated metal panels, comprising two skins of roll-formed and painted metal sheet sandwiching a rigid foam core, with the exterior skin formed in a trapezoidal-ribbed profile and the interior skin formed in a non-ribbed profile, with stucco-embossed or non-embossed surface texture available on both skins, of metal sheet gauge 26, 24, or 22 on both sides, with a width of 40 inches, with a panel thickness of at least 1.5 inches but not exceeding 6 inches, with a panel length of at least 8 feet but not exceeding 50 feet, and painted on both sides by a continuous coil-coating process with either a polyvinylidene fluoride (PVDF) or a polyester or silicone-modified polyester paint system. |
| 314 | Câbles métalliques et câbles | 7312.10.00 | Steel ropes and cables, containing from 6 to 35 strands, new, of rope grade 1960, 2160 or 2400, of a diameter of at least 3.18 millimetres but not exceeding 63.50 millimetres, whether ungalvanized, galvanized or plastic-coated |
| 315 | Câbles métalliques et câbles | 7312.10.00 | Steel ropes and cables, containing from 6 to 35 strands, new, of rope grade 1960 or 2160, of a diameter of at least 1.6 millimetres but not exceeding 50.8 millimetres, whether galvanized or ungalvanized |
| 316 | Câbles métalliques et câbles | 7312.90.00 | Steel wire rope and strand assemblies, fitted with end terminations, new, of a diameter of at least 57.15 millimetres but not exceeding 127.00 millimetres, whether ungalvanized, galvanized or plastic-coated |
| 317 | Acier | 7314.42.00.00 | Welded wire mesh, of carbon steel, of specification ASTM A1064 and ASTM A641, with a wire diameter of at least 2.464 mm but not exceeding 2.566 mm or with a wire diameter of at least 3.200 mm but not exceeding 3.302 mm, zinc coated (galvanized), with a PVC coating, tested to ASTM B117, ASTM D1499, and ASTM G23 |
| 318 | Acier | 7314.42.00.00 | Steel wire mesh, of grade 36, of specification EN 16120-2, pre-galvanized and electro welded, of a thickness of 2.51 mm or 3.25 mm, with a width of at least 6 inches but not exceeding 72 inches, of a length of 100 ft, hot dip galvanized after welding, polyvinyl chloride (PVC) coated |
| 319 | Acier | 7315.11.00.00 | Roller chains, of alloy steel, of grade stainless steel 316, of chain size 80-1, non-marking, for power transmissions. |
| 320 | Acier | 7315.11.00.00 | Roller chains, of alloy steel, of type WH82, for riveted connecting pin chains, for power transmissions. |
| 321 | Acier | 7315.11.00.00 | Roller chain, of alloy steel, with teeth at every pitch, produced for power transmission applications. |
| 322 | Acier | 7315.11.00.00 | Roller chains, of alloy steel, chrome plated, for power transmission applications. |
| 323 | Acier | 7315.11.00.00 | RT (roof top chain) roller chains, of stainless steel, of grade 316, with a pitch of 2.609 inches, for industrial power transmissions. |
| 324 | Acier | 7315.11.00.00 | Sharp top roller chains, of alloy steel, of grade stainless steel 316, for industrial power transmissions. |
| 325 | Acier | 7315.11.00.00 | Roller chains, of alloy steel, of grade stainless steel 316, with a chain size of 81X, with a length of 50ft. |
| 326 | Acier | 7315.11.00.00 | Roller chains with 5 points on each pitch, of stainless steel, of grade 316, of ANSI chain size of 80H-2, with a chrome hardened pin, for industrial power transmission chains. |
| 327 | Acier | 7315.11.00.00 | Connecting links, of stainless steel, of grade 316, for roller chain assemblies meeting 80-3-5PEP. |
| 328 | Acier | 7315.11.00.00 | Roller chains, of stainless steel, of grade 316, for power transmission applications. |
| 329 | Acier | 7315.11.00.00 | Roller chains, of stainless steel, of grade 304, for power transmission applications. |
| 330 | Acier | 7315.19.00.00 | Alloy steel chain components, for roller chain assemblies, produced as connecting links, flat pins, and bushings, conforming to lube-free chain requirements. |
| 331 | Acier | 7315.19.00.00 | Connecting pins, of alloy steel, for roller chain assemblies. |
| 332 | Acier | 7315.19.00.00 | Connecting links, of alloy steel, for roller chain assemblies. |
| 333 | Acier | 7315.19.00.00 | Connecting links, of alloy steel, of type 80-2, for replacement chain parts for roller assemblies. |
| 334 | Acier | 7315.19.00.00 | Roller chains, with 5 points on each pitch, of stainless steel, of grade 316, for industrial power transmission chains. |
| 335 | Acier | 7315.19.00.00 | Cottered connecting links, of stainless steel, of grade 316, for roller chain assemblies consisting of roller chains with 4-points every pitch. |
| 336 | Acier | 7315.19.00.00 | Connecting links, of stainless steel, of grade 316, for roller chain assemblies with 3 slasher points on every second pitch. |
| 337 | Acier | 7315.19.00.00 | Connecting links, of stainless steel, of grade 316, for roller chain assemblies with one opposite slant point on every fourth pitch. |
| 338 | Acier | 7315.19.00.00 | Roller chains, of stainless steel, of grade 316, for industrial power transmission chains. |
| 339 | Acier | 7315.19.00.00 | Connecting pins, of stainless steel, of grade 316, for roller chain assemblies meeting 80H-2. |
| 340 | Acier | 7315.19.00.00 | Connecting alloy steel, of stainless steel, of grade 316, for roller chain assemblies. |
| 341 | Chaînes et pièces détachées | 7315.20.00 | Tire chains, of boron alloy steel, case hardened, with a link wire diameter of at least 7 millimetres but not exceeding 22 millimetres, fitted with side chains, cross chains, hooks and tensioning components, whether oil-finished, painted or galvanized |
| 342 | Acier | 7315.20.00.00 | Tire chains, of boron alloy steel, case hardened, twisted link construction, straight cross chain pattern, with a chain link wire diameter of 7 mm, 8 mm, or 10 mm, with side chains, cross chains, hooks, and tensioning components, with oil finish, painted, or galvanized coating |
| 343 | Acier | 7315.20.00.00 | Tire chains, of boron alloy steel, case hardened, square link construction, straight cross chain pattern, with a chain link wire diameter of 7 mm, 8 mm, or 10 mm, with side chains, cross chains, hooks, and tensioning components, with oil finish, painted, or galvanized coating |
| 344 | Acier | 7315.20.00.00 | Tire chains, of boron alloy steel, case hardened, twisted link construction with welded studded traction elements, straight cross chain pattern, with a chain link wire diameter of 7 mm, 8 mm, or 10 mm, with side chains, cross chains, hooks, and tensioning components, with oil finish, painted, or galvanized coating |
| 345 | Acier | 7315.20.00.00 | Tire chains, of boron alloy steel, case hardened, twisted link construction, straight cross chain pattern, with a chain link wire diameter of 10 mm, 11 mm, or 13 mm, with side chains, cross chains, hooks, and tensioning components, with oil finish, painted, or galvanized coating |
| 346 | Acier | 7315.20.00.00 | Tire chains, of boron alloy steel, case hardened, square link construction, straight cross chain pattern, with a chain link wire diameter of 10 mm, 11 mm, or 13 mm, with side chains, cross chains, hooks, and tensioning components, with oil finish, painted, or galvanized coating |
| 347 | Acier | 7315.20.00.00 | Tire chains, of boron alloy steel, case hardened, twisted link construction with welded studded traction elements, straight cross chain pattern, with a chain link wire diameter of 10 mm, 11 mm, or 13 mm, with side chains, cross chains, hooks, and tensioning components, with oil finish, painted, or galvanized coating |
| 348 | Acier | 7315.20.00.00 | Tire chains, of boron alloy steel, case hardened, twisted link construction with welded studded traction elements, diamond cross chain pattern, with a chain link wire diameter of 10 mm, 11 mm, or 13 mm, with side chains and connectors, with oil finish, painted, or galvanized coating |
| 349 | Acier | 7315.20.00.00 | Tire chains, of boron alloy steel, case hardened, twisted link construction with welded studded traction elements, H-pattern cross chain configuration, with a chain link wire diameter of 10 mm, 11 mm, or 13 mm, with side chains and tensioning components, with oil finish, painted, or galvanized coating |
| 350 | Acier | 7315.20.00.00 | Tire chains, of boron alloy steel, case hardened, continuous oval link construction, double or triple diamond pattern with U-shaped traction elements welded beneath the oval link, with a chain link wire diameter of 19 mm or 22 mm, with oil finish or painted coating |
| 351 | Acier | 7315.82.00.20 | Chain assemblies, of Grade 80 alloy steel welded-link chain, fitted with forged and tempered alloy steel hooks, with nominal chain diameters of 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch, 1 inch, 1-1/8 inch or 1-1/4 inch, overall lengths of 18 inches or 24 inches, with painted or bright finish |
| 352 | Chaînes et pièces détachées | 7315.82.00.20 | Validated version: Welded-link chain assemblies, of alloy steel, of grade 80, fitted with forged alloy steel hooks, with a chain diameter of at least 12.70 millimetres but not exceeding 31.75 millimetres, whether painted or uncoated Requester version: Chain assemblies, of Grade 80 alloy steel welded-link chain, fitted with forged and tempered alloy steel hooks, with nominal chain diameters of 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch, 1 inch, 1-1/8 inch or 1-1/4 inch, overall lengths of 18 inches or 24 inches, with painted or bright finish |
| 353 | Chaînes et pièces détachées | 7315.89.00 | Validated Version: Protection chains, of alloy steel or carbon steel, heat treated, of mesh construction, with a link wire diameter of at least 12 millimetres but not exceeding 23 millimetres, whether painted or uncoated Requester Version: Protection chains, of alloy steel or carbon steel, heat treated, constructed as a high-strength steel mesh chain system, with a chain link wire diameter of 12 mm, 14 mm, 16 mm, 18 mm, 20 mm 22 mm, or 23 mm, with painted, bright, or unfinished steel finish |
| 354 | Acier | 7315.89.00.00 | Protection chains, of alloy steel or carbon steel, heat treated, constructed as a high-strength steel mesh chain system, with a chain link wire diameter of 12 mm, 14 mm, 16 mm, 18 mm, 20 mm 22 mm, or 23 mm, with painted, bright, or unfinished steel finish |
| 355 | Chaînes et pièces détachées | 7315.90.00 | Validated version: Parts of tire chains, track chains and protection chains, of alloy steel or carbon steel, including cross chains, side chains, hooks, connectors, links, pins, bushings and fasteners, whether uncoated, oil-finished or painted Requester version: Chain parts, of alloy steel or carbon steel, consisting of tire chain, track chain, and protection chain repair parts and components, including cross chains, side chains, hooks, connectors, connecting links, pins, bushings, attachments, fasteners, replacement links, and repair kits, manufactured to application-specific dimensions, uncoated, oil finished, painted, bright, or unfinished steel finish |
| 356 | Acier | 7315.90.00.00 | Chain parts, of alloy steel or carbon steel, consisting of tire chain, track chain, and protection chain repair parts and components, including cross chains, side chains, hooks, connectors, connecting links, pins, bushings, attachments, fasteners, replacement links, and repair kits, manufactured to application-specific dimensions, uncoated, oil finished, painted, bright, or unfinished steel finish |
| 357 | Matériaux ferroviaires | 7317.00.00 or 7302.90.00 | Railroad track spikes of iron or steel |
| 358 | Acier | 7318.11.00 | Railway coach screws made of high strength steel, of shank diameter 0.9375-inch, of length 6.5-inches; head dimensions of length of 1.125 inches and of width of 0.844 inches, and thread length of at least 4 inches |
| 359 | Acier | 7318.14.00 | Deck board fastening clips, of stainless steel and nylon, each consisting of a stamped stainless steel gusset, a self-drilling stainless steel screw and an injection-moulded nylon 66 body; gusset of stainless steel of grade 304 or 305; screw of stainless steel of grade 410; with a width of 25 mm, a depth of 18 mm and a height of 51 mm; gusset and screw passivated and epoxy-coated |
| 360 | Acier | 7318.14.00 | Deck board fastening clips, of stainless steel and nylon, each consisting of a stamped stainless steel gusset, a stainless steel screw and an injection-moulded nylon 66 body; gusset of stainless steel of grade 304 or 305; screw of stainless steel of grade 304 or 305; with a width of 49 mm, a depth of 18 mm and a height of 65 mm; gusset and screw passivated and epoxy-coated |
| 361 | Acier | 7318.14.00.00 | Threaded fasteners, self-tapping screws, of stainless steel, cold-formed and threaded, of thread specification No. 10-24 Unified National Coarse (UNC), with a length of 0.375 inches, with a pan head, with a combination square/cruciform recess drive, Type S |
| 362 | Acier | 7318.14.00.00 | Self-tapping screws, of stainless-steel grade 410, wafer head, cross-recessed drive, collated for auto-feed systems, of gauge size #14, with a length of 2.25 inches |
| 363 | Acier | 7318.14.00.00 | Stainless steel self-drilling and self-tapping screws, of gauge size No. 8, with a length of 0.5 inches, with a square drive, with a painted or coated finish |
| 364 | Acier | 7318.14.00.00 | Pan-head self-drilling and self-tapping sheet-metal screw, of stainless steel, of gauge size No. 10, with a length of 0.625 inches |
| 365 | Acier | 7318.14.00.00 | Pan-head self-drilling and self-tapping sheet-metal screw, of stainless steel, of gauge size No. 10, with a length of 0.625 inches |
| 366 | Acier | 7318.14.10.30 | Deck board fastening clips, of stainless steel and nylon, each consisting of a stamped stainless steel gusset, a self-drilling stainless steel screw and an injection-moulded nylon 66 body; gusset of stainless steel of grade 304 or 305; screw of stainless steel of grade 410; with a width of 25 mm, a depth of 18 mm and a height of 51 mm; gusset and screw passivated and epoxy-coated |
| 367 | Acier | 7318.14.10.30 | Deck board fastening clips, of stainless steel and nylon, each consisting of a stamped stainless steel gusset, a stainless steel screw and an injection-moulded nylon 66 body; gusset of stainless steel of grade 304 or 305; screw of stainless steel of grade 304 or 305; with a width of 49 mm, a depth of 18 mm and a height of 65 mm; gusset and screw passivated and epoxy-coated |
| 368 | Acier | 7318.15.00 | Threaded fastening hardware, of medium carbon steel, quenched and tempered, of metric property class 8.8 and 10.9, including lock bolts, section bolts, mounting fasteners, countersunk bolts, splice hardware, overlap hardware and attachment components, including hardware kits and fastening assemblies, with hexagonal, round, internal hex and countersunk head configurations, with metric and imperial thread sizes, of diameters of at least 4 mm but not exceeding 16 mm, of lengths of at least 16 mm but not exceeding 35 mm, zinc coated or with a corrosion-resistant finish |
| 369 | Acier | 7318.15.00.10 | Fillister-head steel screws, compliant with the type design approved under FAA Type Certificate P10NE, of thread size 1/4-28 UNF |
| 370 | Acier | 7318.15.00.10 | Steel set screws, compliant with the type design approved under FAA Type Certificate P10NE, with thread size 5/16-24 UNF |
| 371 | Acier | 7318.15.00.10 | Steel cap screws, compliant with the type design approved under FAA Type Certificate P25EA, with thread size 3/8-24 UNF |
| 372 | Acier | 7318.15.00.10 | Stainless steel screws, of grade 316, threaded, with nominal sizes #8 or #10, with lengths of 1.00 inch, 1.25 inches, or 1.50 inches |
| 373 | Acier | 7318.15.00.42 | Hex head, carriage style, countersunk and internal hex head bolts, of medium carbon steel, quenched and tempered, threaded, of metric property class 8.8 and 10.9, with metric and imperial thread configurations of M6x16, M6x18, M6x25, M6x28, M10x35 and 0.25 inch section bolt configurations, of diameters of at least 4 mm but not exceeding 16 mm, of lengths of at least 10 mm but not exceeding 100 mm, zinc coated or with a corrosion-resistant finish, including bolts supplied with locking compound |
| 374 | Acier | 7318.15.00.42 | Hex head bolts, of stainless steel grade 304, threaded, with a length of at least 2 inches but not exceeding 2.25 inches |
| 375 | Acier | 7318.15.00.49 | Threaded carriage bolts, of carbon steel, cold formed and threaded, of 6.350 mm-20 thread, with a 6.350 mm diameter, with a 9.500 mm length, with a round head, with a square neck, chrome plated |
| 376 | Acier | 7318.15.00.49 | Steel hex-head bolt, compliant with the type design approved under Federal Aviation Administration (FAA) Type Certificate P10NE, with thread size 3/8-24 UNF, cadmium plated, with corrosion-resistant finish |
| 377 | Acier | 7318.15.00.49 | Steel hex-head bolts, compliant with the type design approved under FAA Type Certificate P10NE or P25EA, with thread size 10-32 UNF |
| 378 | Acier | 7318.15.00.49 | Concrete anchors, of carbon steel, of specification ASTM A792, galvanized |
| 379 | Acier | 7318.15.00.49 | Carbon steel fasteners and connection hardware, including threaded bolts, screws and assoicated nuts and washers for use in pre-engineered steel building assembly. |
| 380 | Acier | 7318.15.00.49 or 7318.29.00.00 | Cylindrical pins with spring, of steel, compliant with the type design approved under FAA Type Certificate P10NE, with an outer diameter of 2.38125 mm |
| 381 | Acier | 7318.16.00.90 | Thin-profile steel hex nuts, compliant with the type design approved under FAA Type Certificate P10NE, with thread size 5/16-24 UNF |
| 382 | Acier | 7318.16.00.90 | Thin-profile steel hex nut, compliant with the type design approved under FAA Type Certificate P10NE, with drilled locking feature |
| 383 | Acier | 7318.16.00.90 | Steel self-locking hex nuts, compliant with the type design approved under FAA Type Certificate P25EA, with thread size 1/2-20 UNF |
| 384 | Acier | 7318.16.00.90 | Castellated hex nuts, of steel, of thin profile, compliant with the type design approved under FAA Type Certificate P25EA, with thread size 7/8-20 UNEF (Unified National Extra Fine), cadmium plated |
| 385 | Acier | 7318.19.00 | Threaded connecting links, of forged alloy steel, heat-treated, of Charpy Level 2 rating, for overhead electrical transmission and distribution systems, with threaded ends for connection of insulator strings to transmission towers, with a hot-dip galvanized coating |
| 386 | Acier | 7318.19.00 | Shoulder eye bolts and oval eye bolts, of forged alloy steel, threaded, heat-treated, of Charpy Level 1 rating, with a diameter of at least 0.625 inches but not exceeding 0.875 inches, with a length of at least 4 inches but not exceeding 26 inches, with a hot-dip galvanized coating, for use in overhead electrical transmission and distribution systems |
| 387 | Acier | 7318.19.00 | Spool studs, of forged alloy steel, threaded at both ends, heat-treated, of Charpy Level 1 rating, with a length of at least 250 mm but not exceeding 550 mm, with a hot-dip galvanized coating, for use in overhead electrical transmission and distribution systems |
| 388 | Acier | 7318.19.00 | U-bolts, of alloy steel, threaded, heat-treated, of Charpy Level 2 rating, with a hot-dip galvanized coating, for use in overhead electrical transmission and distribution systems |
| 389 | Acier | 7318.19.00.00 | Threaded inserts, of hardened carbon steel, of metric property class 10.9, with a cylindrical threaded profile and internal threaded openings, of diameters of at least 5 mm but not exceeding 20 mm, of lengths of at least 5 mm but not exceeding 30 mm, with a corrosion-resistant coating |
| 390 | Acier | 7318.22.00 | Carbon steel washers, shims and spacers, of carbon steel, formed as flat or laminated washers and thin spacers, heat-treated or edge-bonded, with a thickness of at least 0.05 mm and with an outer diameter not exceeding 500 mm. |
| 391 | Acier | 7318.22.00.00 | Countersunk steel washers, compliant with the type design approved under FAA Type Certificate P10NE, of nominal size 9/16 inch |
| 392 | Acier | 7318.22.00.00 | Dimpled steel washer, compliant with the type design approved under FAA Type Certificate P10NE, with a 100-degree profile |
| 393 | Acier | 7318.22.00.00 | Washer plates, of stainless steel grade 304, flat-formed, rectangular, of a length of 1.75 inches, of a width of 1.00 inch |
| 394 | Acier | 7318.29.00 | Stainless steel washers, shims and spacers, of stainless steel, formed as flat or laminated washers and thin spacers, heat-treated or edge-bonded, with a thickness of at least 0.05 mm and with an outer diameter not exceeding 500 mm. |
| 395 | Acier | 7318.29.00.00 | Hog rings, of stainless steel or carbon steel, formed as fastening clips, with nominal sizes of 3/8 inch, 1/2 inch, and 3/4 inch |
| 396 | Acier | 7320.20.00 | Ressorts hélicoïdaux en acier, de type compression, traction ou torsion, en acier à ressort au carbone ou en acier inoxydable, y compris les nuances SWC, SWP-A, SWP-B, SUS 304 et SUS 316, avec ou sans crochets, boucles ou bras formés, d'un diamètre de fil d'au moins 0,10 millimètre sans dépasser 5,00 millimètres, revêtus ou non, notamment zingués, cuivrés, cirés, revêtus d'un revêtement zinc-aluminium en flocons, passivés, traités pour la réduction du bruit (anti-squeak) ou autrement traités en surface pour assurer une protection contre la corrosion ou répondre à des exigences fonctionnelles spécifiques. |
| 397 | Composants pour barbecue | 7321.11.90.30 | Portable outdoor propane cooking appliances, of galvannealed carbon steel, stainless steel of grade 430, and cast iron, stamped, with a length of 927.1 mm, with a width of 558.8 mm, with a height of 990.6 mm, powder coated |
| 398 | Composants pour barbecue | 7321.11.90.30 | Portable outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped, of the liquefied petroleum gas type, with a length of 647.7 mm, with a width of 723.9 mm, with a height of 1231.9 mm, powder coated |
| 399 | Composants pour barbecue | 7321.11.90.30 | Portable outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped, with a length of 647.7 mm, with a width of 723.9 mm, with a height of 1231.9 mm, powder coated |
| 400 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, injection molded, of the liquefied petroleum gas type, with a length of 1447.8 mm, with a width of 609.6 mm, with a height of 1181.1 mm, powder or porcelain coated |
| 401 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the liquefied petroleum gas type, with a length of 1587.5 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder or porcelain coated |
| 402 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of stainless steel of grade 304 and galvannealed carbon steel, stamped and injection molded, of the liquefied petroleum gas type, with a length of 1587.5 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder coated |
| 403 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gase cooking appliances, of stainless steel of grade 304 and galvannealed carbon steel, stamped and injection molded, of the natural gas type, with a length of 1778.0 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder coated |
| 404 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of stainless steel of grade 304 and galvannealed carbon steel, stamped and injection molded, of the liquefied petroleum gas type, with a length of 1778.0 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder coated |
| 405 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped and injection molded, of the liquefied petroleum gas type, with a length of 1270.0 mm, with a width of 609.6 mm, with a height of 1181.1 mm, powder or porcelain coated |
| 406 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped and injection molded, of the natural gas type, with a length of 1270.0 mm, with a width of 609.6 mm, with a height of 1181.1 mm, powder or porcelain coated |
| 407 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped and injection molded, of the natural gas type, with a length of 1447.8 mm, with a width of 609.6 mm, with a height of 1181.1 mm, powder or porcelain coated |
| 408 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped and injection molded, of the liquefied petroleum gas type, with a length of 1447.8 mm, with a width of 609.6 mm, with a height of 1181.1 mm, powder or porcelain coated |
| 409 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped and injection molded, of the natural gas type, with a length of 1447.8 mm, with a width of 609.6 mm, with a height of 1181.1 mm, powder coated |
| 410 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped and injection molded, of the liquefied petroleum gas type, with a length of 1600.2 mm, with a width of 609.6 mm, with a height of 1181.1 mm, powder or porcelain coated |
| 411 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped and injection molded, of the liquefied petroleum gas type, with a length of 1600.2 mm, with a width of 609.6 mm, with a height of 1181.1 mm, powder coated |
| 412 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped and injection molded, of the natural gas type, with a length of 1600.2 mm, with a width of 609.6 mm, with a height of 1181.1 mm, powder coated |
| 413 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the liquefied petroleum gas type, with a length of 791.0 mm, with a width of 669.8 mm, with a height of 632.2 mm, powder or porcelain coated |
| 414 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the natural gas type, with a length of 791.0 mm, with a width of 669.8 mm, with a height of 632.2 mm, powder or porcelain coated |
| 415 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the liquefied petroleum gas type, with a length of 953.0 mm, with a width of 669.8 mm, with a height of 632.2 mm, powder or porcelain coated |
| 416 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the natural gas type, with a length of 953.0 mm, with a width of 669.8 mm, with a height of 632.2 mm, powder or porcelain coated |
| 417 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the liquefied petroleum gas type, with a length of 1430.0 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder or porcelain coated |
| 418 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the natural gas type, with a length of 1430.0 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder or porcelain coated |
| 419 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the natural gas type, with a length of 1139.3 mm, with a width of 669.8 mm, with a height of 632.2 mm, powder or porcelain coated |
| 420 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the liquefied petroleum gas type, with a length of 1139.3 mm, with a width of 669.8 mm, with a height of 632.2 mm, powder or porcelain coated |
| 421 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvanealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the liquefied petroleum gas type, with a length of 1778.0 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder or porcelain coated |
| 422 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the natural gas type, with a length of 1778.0 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder or porcelain coated |
| 423 | Composants pour barbecue | 7321.11.90.30 | Outdoor natural gas cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, of the natural gas type, with a length of 1587.5 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder or porcelain coated |
| 424 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, injection molded, of the liquefied petroleum gas type, with a length of 1371.6 mm, with a width of 508.0 mm, with a height of 1085.9 mm, powder coated |
| 425 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, injection molded, of the liquefied petroleum gas type, with a length of 1371.6 mm, with a width of 609.6 mm, with a height of 1155.7 mm, powder coated |
| 426 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, with a length of 1778.0 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder or porcelain coated |
| 427 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, with a length of 1587.5 mm, with a width of 629.9 mm, with a height of 1249.7 mm, powder or porcelain coated |
| 428 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, with a length of 953.0 mm, with a width of 669.8 mm, with a height of 632.2 mm, powder or porcelain coated |
| 429 | Composants pour barbecue | 7321.11.90.30 | Outdoor propane cooking appliances, of galvannealed carbon steel and stainless steel of grade 304, stamped and injection molded, with a length of 791.0 mm, with a width of 669.8 mm, with a height of 632.2 mm, powder or porcelain coated |
| 430 | Composants pour barbecue | 7321.11.90.30 | Outdoor charcoal cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped and injection molded, with a length of 951.9 mm, with a width of 681.7 mm, with a height of 1231.4 mm, powder coated |
| 431 | Composants pour barbecue | 7321.11.90.30 | Outdoor charcoal cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, stamped, with a length of 647.7 mm, with a width of 723.9 mm, with a height of 1231.9 mm, powder coated |
| 432 | Composants pour barbecue | 7321.11.90.30 | Outdoor wood pellet cooking appliances, of galvannealed carbon steel and stainless steel of grade 430, injection molded, with a length of 596.9 mm, with a width of 406.4 mm, with a height of 431.8 mm, powder coated |
| 433 | Composants pour barbecue | 7321.90.10.90 | Collector box for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 276.0 mm, with a width of 17.8 mm, with a height of 30.0 mm |
| 434 | Composants pour barbecue | 7321.90.10.90 | Collector box for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 600.0 mm, with a width of 17.8 mm, with a height of 30.0 mm |
| 435 | Composants pour barbecue | 7321.90.10.90 | Collector box for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 762.0 mm, with a width of 17.8 mm, with a height of 30.0 mm |
| 436 | Composants pour barbecue | 7321.90.10.90 | Grease rail for outdoor cooking appliance, of galvannealed carbon steel, with a width of 17.0 mm, with a height of 22.0 mm, with a length of 690.0 mm, powder coated |
| 437 | Composants pour barbecue | 7321.90.10.90 | Grease rail for outdoor cooking appliance, of galvannealed carbon steel, with a width of 17.0 mm, with a height of 22.0 mm, with a length of 836.0 mm, powder coated |
| 438 | Composants pour barbecue | 7321.90.10.90 | Rear panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 580.0 mm, with a width of 19.0 mm, with a height of 636.0 mm, powder coated |
| 439 | Composants pour barbecue | 7321.90.10.90 | Top magnet bracket for outdoor cooking appliance, of galvannealed carbon steel, with a length of 783.2 mm, with a width of 70.9 mm, with a height of 27.0 mm, powder coated |
| 440 | Composants pour barbecue | 7321.90.10.90 | Drawer for outdoor cooking appliance, of galvannealed carbon steel, with a length of 293.0 mm, with a width of 501.0 mm, with a height of 115.2 mm, powder coated |
| 441 | Composants pour barbecue | 7321.90.10.90 | Outer drawer front for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 320.0 mm, with a width of 3.6 mm, with a height of 284.0 mm |
| 442 | Composants pour barbecue | 7321.90.10.90 | Tank base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 290.0 mm, with a width of 290.0 mm, with a height of 31.0 mm, powder coated |
| 443 | Composants pour barbecue | 7321.90.10.90 | Base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 564.5 mm, with a width of 692.0 mm, with a height of 42.0 mm, powder coated |
| 444 | Composants pour barbecue | 7321.90.10.90 | Side burner body base for outdoor cooking appliance, of carbon steel, of vitreous enamal Type 1, with a length of 2,494.9 mm, with a width of 372.9 mm, with a height of 26.9 mm, porcelain enamel coated |
| 445 | Composants pour barbecue | 7321.90.10.90 | Shelf assembly for outdoor cooking appliance, of carbon steel or stainless steel of grade 304, with a length of 570.0 mm, with a width of 215.8 mm, with a height of 412.4 mm, powder coated |
| 446 | Composants pour barbecue | 7321.90.10.90 | Lower base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 564.5 mm, with a width of 692.0 mm, with a height of 42.0 mm, powder coated |
| 447 | Composants pour barbecue | 7321.90.10.90 | Cabinet shelf for outdoor cooking appliance, of galvannealed carbon steel, with a length of 435.0 mm, with a width of 345.0 mm, with a height of 29.0 mm, powder coated |
| 448 | Composants pour barbecue | 7321.90.10.90 | Firebox heat shield for outdoor cooking appliance, of galvannealed carbon steel, with a length of 66.0 mm, with a width of 159.0 mm, with a height of 63.0 mm, zinc coated |
| 449 | Composants pour barbecue | 7321.90.10.90 | Heat shield for outdoor cooking appliance, of galvannealed carbon steel, with a length of 828.0 mm, with a width of 159.0 mm, with a height of 63.0 mm, zinc coated |
| 450 | Composants pour barbecue | 7321.90.10.90 | Grease tray for outdoor cooking appliance, of carbon steel, of vitreous enamel Type 1, with a length of 646.0 mm, with a width of 170.0 mm, with a height of 22.0 mm, porcelain coated |
| 451 | Composants pour barbecue | 7321.90.10.90 | Grease tray for outdoor cooking appliance, of carbon steel, of vitreous enamel Type 1, with a length of 808.0 mm, with a width of 170.0 mm, with a height of 22.0 mm, porcelain coated |
| 452 | Composants pour barbecue | 7321.90.10.90 | Inner front firebox panel for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 828.0 mm, with a width of 199.0 mm, with a height of 223.0 mm |
| 453 | Composants pour barbecue | 7321.90.10.90 | Inner rear firebox for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 828.0 mm, with a width of 199.0 mm, with a height of 223.0 mm |
| 454 | Composants pour barbecue | 7321.90.10.90 | Grease shields for outdoor cooking appliance, of stainless steel, of grade 304, formed, with a thickness of 0.8 mm, with a length of 165.5 mm, and a width of 149.9 mm |
| 455 | Composants pour barbecue | 7321.90.10.90 | Side panel for outdoor cooking appliance, of carbon steel, with a length of 721.0 mm, with a width of 461.4 mm, with a height of 28.0 mm, painted |
| 456 | Composants pour barbecue | 7321.90.10.90 | Warming rack for outdoor cooking appliance, of carbon steel, of vitreous enamel Type 1, with a length of 664.1 mm, a width of 180.0 mm, and a height of 26.6 mm, porcelain enamel finish |
| 457 | Composants pour barbecue | 7321.90.10.90 | Grease pan for outdoor cooking appliance, of galvannealed carbon steel, with a length of 164.0 mm, with a width of 130.0 mm, with a height of 27.8 mm, painted (colour?) |
| 458 | Composants pour barbecue | 7321.90.10.90 | Side burner cover for outdoor cooking appliance, of galvannealed carbon steel, with a length of 362.6 mm, a width of 284.6 mm, and a height of 29.0 mm, painted |
| 459 | Composants pour barbecue | 7321.90.10.90 | Shelf for outdoor cooking appliance, of galvannealed carbon steel, with a length of 306.0 mm, with a width of 458.4 mm, with a height of 37.6 mm, powder coated |
| 460 | Composants pour barbecue | 7321.90.10.90 | Grease tray for outdoor cooking appliance, of galvannealed carbon steel, with a length of 472.0 mm, with a width of 170.0 mm, with a height of 22.0 mm, painted |
| 461 | Composants pour barbecue | 7321.90.10.90 | Rear u-channel bracket for outdoor cooking appliance, of galvannealed carbon steel, with a length of 25.0 mm, with a width of 35.0 mm, with a height of 457.2 mm, powder coated |
| 462 | Composants pour barbecue | 7321.90.10.90 | Front fascia for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 445.5 mm, with a width of 24.0 mm, with a height of 63.5 mm, powder coated |
| 463 | Composants pour barbecue | 7321.90.10.90 | Drawer with match chain for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 850.0 mm, with a width of 376.8 mm, with a height of 152.4 mm |
| 464 | Composants pour barbecue | 7321.90.10.90 | Vented facia bracket for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 445.5 mm, with a width of 24.0 mm, with a height of 63.5 mm |
| 465 | Composants pour barbecue | 7321.90.10.90 | Grease pan for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 660.0 mm, with a width of 181.6 mm, with a height of 25.4 mm |
| 466 | Composants pour barbecue | 7321.90.10.90 | Valve for outdoor cooking appliance, of carbon steel and brass, with a length of 700.0 mm, with a width of 75.0 mm, with a height of 75.0 mm |
| 467 | Composants pour barbecue | 7321.90.10.90 | Rear firebox panel for outdoor cooking appliance, of carbon steel, with a length of 661.0 mm, with a width of 139.0 mm, with a height of 400.0 mm, powder coated |
| 468 | Composants pour barbecue | 7321.90.10.90 | Hood panel for outdoor cooking appliance, of carbon steel, of vitreous enamel Type 1, with a length of 313.0 mm, with a width of 277.0 mm, with a height of 41.0 mm |
| 469 | Composants pour barbecue | 7321.90.10.90 | Burner bar for outdoor cooking appliance, of carbon steel, of grade 430, with a length of 352.4 mm, with a width of 127.0 mm, with a height of 88.9 mm |
| 470 | Composants pour barbecue | 7321.90.10.90 | Burner for outdoor cooking appliance, of carbon steel, of grade 430, with a length of 352.4 mm, with a width of 127.0 mm, with a height of 88.9 mm |
| 471 | Composants pour barbecue | 7321.90.10.90 | Heat distribution plate for outdoor cooking appliance, of galvannealed carbon steel, with a length of 520.7 mm, with a width of 54.8 mm, with a height of 63.5 mm |
| 472 | Composants pour barbecue | 7321.90.10.90 | Burner assembly for outdoor cooking appliance, of galvannealed carbon steel and stainless steel of grade 430, with a length of 403.2 mm, with a width of 127.0 mm, with a height of 165.1 mm |
| 473 | Composants pour barbecue | 7321.90.10.90 | Burner assembly for outdoor cooking appliance, of carbon steel, with a length of 403.2 mm, with a width of 127.0 mm, with a height of 165.1 mm |
| 474 | Composants pour barbecue | 7321.90.10.90 | Bent leg for outdoor cooking appliance, of galvannealed carbon steel, with a length of 777.9 mm, with a width of 341.3 mm, with a height of 32.0 mm |
| 475 | Composants pour barbecue | 7321.90.10.90 | Heat shield for outdoor cooking appliance, of galvannealed carbon steel, with a length of 463.6 mm, with a width of 19.1 mm, with a height of 38.1 mm |
| 476 | Composants pour barbecue | 7321.90.10.90 | Heat tent for outdoor cooking appliance, of galvannealed carbon steel, with a length of 495.3 mm, with a width of 54.8 mm, with a height of 38.1 mm |
| 477 | Composants pour barbecue | 7321.90.10.90 | Warming rack for outdoor cooking appliance, of carbon steel, of vitreous enamel Type 1, with a length of 673.1 mm, with a width of 237.4 mm, with a height of 32.4 mm, porcelain enamel finished |
| 478 | Composants pour barbecue | 7321.90.10.90 | Rack without swing-arm for outdoor cooking appliance, of carbon steel, of vitreous enamel Type 1, with a length of 701.7 mm, with a width of 274.0 mm, with a height of 26.6 mm, porcelain enamel finished |
| 479 | Composants pour barbecue | 7321.90.10.90 | Side burner assembly for outdoor cooking appliance, of stainless steel, of grade 430, with a length of 82.6 mm, with a width of 130.0 mm, with a height of 25.4 mm |
| 480 | Composants pour barbecue | 7321.90.10.90 | Lid insert for outdoor cooking appliance, of carbon steel, of vitreous enamel Type 1, with a length of 407.0 mm and a width of 246.0 mm, porcelain coated |
| 481 | Composants pour barbecue | 7321.90.10.90 | Lid insert for outdoor cooking appliance, of carbon steel, of vitreous enamel Type 1, with a length of 508.0 mm and a width of 246.0 mm, porcelain coated |
| 482 | Composants pour barbecue | 7321.90.10.90 | Tank bracket for outdoor cooking appliance, of galvannealed carbon steel, with a length of 32.0 mm, a width of 99.0 mm, and a height of 104.2 mm, painted |
| 483 | Composants pour barbecue | 7321.90.10.90 | Tank bracket for outdoor cooking appliance, of galvannealed carbon steel, with a length of 370.0 mm, a width of 124.6 mm, and a height of 120.0 mm, painted |
| 484 | Composants pour barbecue | 7321.90.10.90 | Side burner body for outdoor cooking appliance, of carbon steel, of vitreous enamel Type 1, with a length of 2,494.9 mm, a width of 372.9 mm, and a height of 26.9 mm, porcelain enamel coated |
| 485 | Composants pour barbecue | 7321.90.10.90 | Hopper bottom panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 362.7 mm, a width of 442.0 mm, and a height of 18.0 mm, painted |
| 486 | Composants pour barbecue | 7321.90.10.90 | Side panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 721.0 mm, a width of 461.4 mm, and a height of 28.0 mm, uncoated |
| 487 | Composants pour barbecue | 7321.90.10.90 | Side panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 721.0 mm, a width of 461.4 mm, and a height of 28.0 mm, painted |
| 488 | Composants pour barbecue | 7321.90.10.90 | Castor bracket support for outdoor cooking appliance, of galvannealed carbon steel, with a length of 580.0 mm, a width of 70.5 mm, and a height of 48.0 mm, painted |
| 489 | Composants pour barbecue | 7321.90.10.90 | Side panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 721.0 mm, a width of 461.4 mm, and a height of 28.0 mm, uncoated |
| 490 | Composants pour barbecue | 7321.90.10.90 | Side panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 721.0 mm, a width of 461.4 mm, and a height of 28.0 mm, painted |
| 491 | Composants pour barbecue | 7321.90.10.90 | Bracket for outdoor cooking appliance, of galvannealed carbon steel, with a length of 477.6 mm, a width of 100.0 mm, and a height of 12.7 mm, uncoated |
| 492 | Composants pour barbecue | 7321.90.10.90 | Bracket for outdoor cooking appliance, of galvannealed carbon steel, with a length of 477.6 mm, a width of 100.0 mm, and a height of 12.7 mm, painted |
| 493 | Composants pour barbecue | 7321.90.10.90 | Inner door panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 565.1 mm, a width of 310.9 mm, and a height of 24.1 mm, painted |
| 494 | Composants pour barbecue | 7321.90.10.90 | Outer door panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 567.5 mm, a width of 312.5 mm, and a height of 23.6 mm, painted |
| 495 | Composants pour barbecue | 7321.90.10.90 | Inner door panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 565.1 mm, a width of 391.9 mm, and a height of 24.1 mm, painted |
| 496 | Composants pour barbecue | 7321.90.10.90 | Outer door panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 567.5 mm, a width of 393.5 mm, and a height of 23.6 mm, painted |
| 497 | Composants pour barbecue | 7321.90.10.90 | Outer door panel for outdoor cooking appliance, of stainless steel, of grade 430, with a length of 567.5 mm, a width of 393.5 mm, and a height of 23.6 mm, uncoated |
| 498 | Composants pour barbecue | 7321.90.10.90 | Inner door panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 565.1 mm, a width of 453.5 mm, and a height of 23.6 mm, uncoated |
| 499 | Composants pour barbecue | 7321.90.10.90 | Rear panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 383.6 mm, a width of 636.3 mm, and a height of 11.0 mm, uncoated |
| 500 | Composants pour barbecue | 7321.90.10.90 | Front pedestal panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 637.0 mm, a width of 609.6 mm, and a height of 25.0 mm, painted |
| 501 | Composants pour barbecue | 7321.90.10.90 | Base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 454.8 mm, a width of 415.5 mm, and a height of 50.0 mm, painted |
| 502 | Composants pour barbecue | 7321.90.10.90 | Base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 615.4 mm, a width of 522.2 mm, and a height of 0.8 mm, uncoated |
| 503 | Composants pour barbecue | 7321.90.10.90 | Base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 692.0 mm, a width of 454.8 mm, and a height of 50.0 mm, painted |
| 504 | Composants pour barbecue | 7321.90.10.90 | Base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 692.0 mm, a width of 454.8 mm, and a height of 50.0 mm, uncoated |
| 505 | Composants pour barbecue | 7321.90.10.90 | Base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 789.4 mm, a width of 552.2 mm, and a height of 0.8 mm, uncoated |
| 506 | Composants pour barbecue | 7321.90.10.90 | Base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 854.0 mm, a width of 454.8 mm, and a height of 50.0 mm, painted |
| 507 | Composants pour barbecue | 7321.90.10.90 | Base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 951.4 mm, a width of 552.2 mm, and a height of 0.8 mm, uncoated |
| 508 | Composants pour barbecue | 7321.90.10.90 | Grease tray for outdoor cooking appliance, of galvannealed carbon steel, with a length of 472.0 mm, with a width of 170.0 mm, with a height of 22.0 mm, uncoated |
| 509 | Composants pour barbecue | 7321.90.10.90 | Battery bracket for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 76.7 mm, with a width of 54.0 mm, with a height of 31.5 mm, uncoated |
| 510 | Composants pour barbecue | 7321.90.10.90 | Vent panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 301.6 mm, with a width of 92.8 mm, with a height of 19.5 mm, uncoated |
| 511 | Composants pour barbecue | 7321.90.10.90 | Vent panel for outdoor cooking appliance, of galvannealed carbon steel, with a length of 301.6 mm, with a width of 92.8 mm, with a height of 19.5 mm, painted |
| 512 | Composants pour barbecue | 7321.90.10.90 | Ignitor bracket for outdoor cooking appliance, of stainless steel, of grade 304, with a length of 76.7 mm, with a width of 54.0 mm, with a height of 31.5 mm, uncoated |
| 513 | Composants pour barbecue | 7321.90.10.90 | Tank bracket for outdoor cooking appliance, of galvannealed carbon steel, with a length of 144.0 mm, with a width of 50.0 mm, with a height of 35.0 mm, uncoated |
| 514 | Composants pour barbecue | 7321.90.10.90 | Tank bracket for outdoor cooking appliance, of galvannealed carbon steel, with a length of 144.0 mm, with a width of 50.0 mm, with a height of 35.0 mm, uncoated |
| 515 | Composants pour barbecue | 7321.90.10.90 | Tank bracket for outdoor cooking appliance, of galvannealed carbon steel, with a length of 370.0 mm, with a width of 124.6 mm, with a height of 120.0 mm, uncoated |
| 516 | Composants pour barbecue | 7321.90.10.90 | Tank bracket for outdoor cooking appliance, of galvannealed carbon steel, with a length of 370.0 mm, with a width of 124.6 mm, with a height of 120.0 mm, painted |
| 517 | Composants pour barbecue | 7321.90.10.90 | Tank base for outdoor cooking appliance, of galvannealed carbon steel, with a length of 290.0 mm, with a width of 290.0 mm, with a height of 31.0 mm, uncoated |
| 518 | Composants pour barbecue | 7321.90.10.90 | Tank base support for outdoor cooking appliance, of galvannealed carbon steel, with a length of 335.0 mm, with a width of 23.0 mm, with a height of 51.0 mm, uncoated |
| 519 | Composants pour barbecue | 7321.90.10.90 | Tank base support for outdoor cooking appliance, of galvannealed carbon steel, with a length of 335.0 mm, with a width of 23.0 mm, with a height of 51.0 mm, powder coated |
| 520 | Acier | 7322.90.10 | Condensing single-stage electronically commutated motor multi-position residential gas furnace, of steel, with an annual fuel utilization efficiency of 96%, of a heating capacity of at least 26,000 BTU and not exceeding 120,000 BTU |
| 521 | Acier | 7322.90.10 | Condensing two-stage electronically commutated motor multi-position residential gas furnace, of steel, with an annual fuel utilization efficiency of 96%, of a heating capacity of at least 40,000 BTU and not exceeding 120,000 BTU |
| 522 | Acier | 7322.90.10 | Condensing two-stage variable speed electronically commutated motor multi-position residential gas furnace, of steel, with an annual fuel utilization efficiency of 96%, of a heating capacity of at least 40,000 BTU and not exceeding 120,000 BTU |
| 523 | Acier | 7322.90.10 | Condensing modulating gas-fired electronically commutated motor multi-position residential gas furnace, of steel, with an annual fuel utilization efficiency of 98%, of a heating capacity of at least 60,000 BTU and not exceeding 120,000 BTU |
| 524 | Acier | 7323.99.00.90 | Pull-out vanity ironing board in chrome, fold-away type, with a width of 14 inches, with a depth of 21 inches, and with a height of 4 inches. |
| 525 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 8.25 inches, with a width of 10.25 inches, with a length not exceeding 12 feet |
| 526 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, of square cross-section with sides of 8.268 inches, with a length not exceeding 12 feet |
| 527 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, of square cross-section with sides of 8.50 inches, with a length not exceeding 12 feet |
| 528 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 8.75 inches, with a width of 10.50 inches, with a length not exceeding 12 feet |
| 529 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 8.80 inches, with a width of 9.80 inches, with a length not exceeding 12 feet |
| 530 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.00 inches, with a width of 10.00 inches, with a length not exceeding 12 feet |
| 531 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.00 inches, with a width of 11.00 inches, with a length not exceeding 12 feet |
| 532 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.00 inches, with a width of 11.50 inches, with a length not exceeding 12 feet |
| 533 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.00 inches, with a width of 12.75 inches, with a length not exceeding 12 feet |
| 534 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.00 inches, with a width of 13.00 inches, with a length not exceeding 12 feet |
| 535 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.00 inches, with a width of 13.50 inches, with a length not exceeding 12 feet |
| 536 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.00 inches, with a width of 14.00 inches, with a length not exceeding 12 feet |
| 537 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, of square cross-section with sides of 9.00 inches, with a length not exceeding 12 feet |
| 538 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.00 inches, with a width of 9.50 inches, with a length not exceeding 12 feet |
| 539 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.25 inches, with a width of 10.25 inches, with a length not exceeding 12 feet |
| 540 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.25 inches, with a width of 16.25 inches, with a length not exceeding 12 feet |
| 541 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.58 inches, with a width of 9.60 inches, with a length not exceeding 12 feet |
| 542 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 9.88 inches, with a width of 11.88 inches, with a length not exceeding 12 feet |
| 543 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 8.661 inches, with a width of 11.024 inches, with a length not exceeding 12 feet |
| 544 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 1.25 inches, with a width of 2.00 inches, with a length not exceeding 12 feet |
| 545 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 1.50 inches, with a width of 2.50 inches, with a length not exceeding 12 feet |
| 546 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 1.50 inches, with a width of 6.00 inches, with a length not exceeding 12 feet |
| 547 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 1.80 inches, with a width of 3.50 inches, with a length not exceeding 12 feet |
| 548 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 2.00 inches, with a width of 7.12 inches, with a length not exceeding 12 feet |
| 549 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 2.50 inches, with a width of 5.00 inches, with a length not exceeding 12 feet |
| 550 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 2.50 inches, with a width of 8.00 inches, with a length not exceeding 12 feet |
| 551 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, of square cross-section with sides of 2.75 inches, with a length not exceeding 12 feet |
| 552 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 3.00 inches, with a width of 3.50 inches, with a length not exceeding 12 feet |
| 553 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 3.00 inches, with a width of 4.25 inches, with a length not exceeding 12 feet |
| 554 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 3.00 inches, with a width of 5.80 inches, with a length not exceeding 12 feet |
| 555 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 3.25 inches, with a width of 7.00 inches, with a length not exceeding 12 feet |
| 556 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 3.50 inches, with a width of 7.75 inches, with a length not exceeding 12 feet |
| 557 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 3.937 inches, with a width of 5.906 inches, with a length not exceeding 12 feet |
| 558 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 4.00 inches, with a width of 4.25 inches, with a length not exceeding 12 feet |
| 559 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 4.00 inches, with a width of 4.40 inches, with a length not exceeding 12 feet |
| 560 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 4.25 inches, with a width of 7.187 inches, with a length not exceeding 12 feet |
| 561 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 4.40 inches, with a width of 4.50 inches, with a length not exceeding 12 feet |
| 562 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 4.50 inches, with a width of 8.75 inches, with a length not exceeding 12 feet |
| 563 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 5.00 inches, with a width of 10.236 inches, with a length not exceeding 12 feet |
| 564 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 5.00 inches, with a width of 6.50 inches, with a length not exceeding 12 feet |
| 565 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 5.118 inches, with a width of 7.874 inches, with a length not exceeding 12 feet |
| 566 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, of square cross-section with sides of 6.00 inches, with a length not exceeding 12 feet |
| 567 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 6.25 inches, with a width of 7.00 inches, with a length not exceeding 12 feet |
| 568 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 6.50 inches, with a width of 7.00 inches, with a length not exceeding 12 feet |
| 569 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 6.50 inches, with a width of 9.85 inches, with a length not exceeding 12 feet |
| 570 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 8.00 inches, with a width of 11.00 inches, with a length not exceeding 12 feet |
| 571 | Acier | 7325.99.99 | Ductile iron bars, of grade 65-45-12, of specification ASTM A536, with a thickness of 0.75 inches, with a width of 6.496 inches, with a length not exceeding 12 feet |
| 572 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 1.46 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 573 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 1.50 inches, with a length not exceeding 12 feet. |
| 574 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 1.50 inches, with a width of 1.75 inches, with a length not exceeding 12 feet. |
| 575 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 1.50 inches, with a width of 2.75 inches, with a length not exceeding 12 feet. |
| 576 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 1.50 inches, with a width of 6.50 inches, with a length not exceeding 12 feet. |
| 577 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 1.575 inches, with a length not exceeding 12 feet. |
| 578 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 1.75 inches, with a length not exceeding 12 feet. |
| 579 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 1.75 inches, with a width of 2.25 inches, with a length not exceeding 12 feet. |
| 580 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 1.75 inches, with a width of 2.75 inches, with a length not exceeding 12 feet. |
| 581 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 1.75 inches, with a width of 3.50 inches, with a length not exceeding 12 feet. |
| 582 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 1.813 inches, with a width of 6.75 inches, with a length not exceeding 12 feet. |
| 583 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 10.00 inches, with a length not exceeding 12 feet. |
| 584 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 10.00 inches, ultrasonically tested, with a length not exceeding 12 feet. |
| 585 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 10.00 inches, with a width of 10.80 inches, with a length not exceeding 12 feet. |
| 586 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 10.00 inches, with a width of 11.00 inches, with a length not exceeding 12 feet. |
| 587 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 10.00 inches, with a width of 12.00 inches, with a length not exceeding 12 feet. |
| 588 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 10.00 inches, with a width of 13.00 inches, with a length not exceeding 12 feet. |
| 589 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 10.00 inches, with a width of 14.00 inches, with a length not exceeding 12 feet. |
| 590 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 10.00 inches, with a width of 15.00 inches, with a length not exceeding 12 feet. |
| 591 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 10.00 inches, with a width of 16.00 inches, with a length not exceeding 12 feet. |
| 592 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 10.00 inches, with a width of 18.00 inches, with a length not exceeding 12 feet. |
| 593 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 10.50 inches, with a length not exceeding 12 feet. |
| 594 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 10.50 inches, with a width of 11.00 inches, with a length not exceeding 12 feet. |
| 595 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 11.00 inches, with a length not exceeding 12 feet. |
| 596 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 11.00 inches, with a width of 12.00 inches, with a length not exceeding 12 feet. |
| 597 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 11.00 inches, with a width of 15.00 inches, with a length not exceeding 12 feet. |
| 598 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 11.42 inches, with a width of 10.24 inches, with a length not exceeding 12 feet. |
| 599 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 11.60 inches, with a width of 11.90 inches, with a length not exceeding 12 feet. |
| 600 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 12.00 inches, with a length not exceeding 12 feet. |
| 601 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 12.00 inches, ultrasonically tested, with a length not exceeding 12 feet. |
| 602 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 12.00 inches, with a width of 12.50 inches, with a length not exceeding 12 feet. |
| 603 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 12.00 inches, with a width of 13.00 inches, with a length not exceeding 12 feet. |
| 604 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 12.00 inches, with a width of 13.50 inches, with a length not exceeding 12 feet. |
| 605 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 12.00 inches, with a width of 14.00 inches, with a length not exceeding 12 feet. |
| 606 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 12.00 inches, with a width of 15.00 inches, with a length not exceeding 12 feet. |
| 607 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 12.00 inches, with a width of 18.00 inches, with a length not exceeding 12 feet. |
| 608 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 12.50 inches, with a length not exceeding 12 feet. |
| 609 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 13.00 inches, with a length not exceeding 12 feet. |
| 610 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 13.00 inches, with a width of 13.50 inches, with a length not exceeding 12 feet. |
| 611 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 13.00 inches, with a width of 13.50 inches, ultrasonically tested, with a length not exceeding 12 feet. |
| 612 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 13.00 inches, with a width of 14.00 inches, with a length not exceeding 12 feet. |
| 613 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 14.00 inches, with a width of 17.00 inches, with a length not exceeding 12 feet. |
| 614 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 14.00 inches, with a width of 18.00 inches, with a length not exceeding 12 feet. |
| 615 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 14.50 inches, with a width of 21.50 inches, with a length not exceeding 12 feet. |
| 616 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 15.00 inches, with a length not exceeding 12 feet. |
| 617 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 17.32 inches, with a width of 17.72 inches, with a length not exceeding 12 feet. |
| 618 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 17.75 inches, with a length not exceeding 12 feet. |
| 619 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 2.00 inches, with a length not exceeding 12 feet. |
| 620 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.00 inches, with a width of 3.00 inches, with a length not exceeding 12 feet. |
| 621 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.00 inches, with a width of 3.25 inches, with a length not exceeding 12 feet. |
| 622 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.00 inches, with a width of 3.50 inches, with a length not exceeding 12 feet. |
| 623 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.00 inches, with a width of 4.00 inches, with a length not exceeding 12 feet. |
| 624 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.00 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 625 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.00 inches, with a width of 6.00 inches, with a length not exceeding 12 feet. |
| 626 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.00 inches, with a width of 7.72 inches, with a length not exceeding 12 feet. |
| 627 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.125 inches, with a width of 5.75 inches, with a length not exceeding 12 feet. |
| 628 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.17 inches, with a width of 14.18 inches, with a length not exceeding 12 feet. |
| 629 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.17 inches, with a width of 4.18 inches, with a length not exceeding 12 feet. |
| 630 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.185 inches, with a width of 2.992 inches, with a length not exceeding 12 feet. |
| 631 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.25 inches, with a width of 4.75 inches, with a length not exceeding 12 feet. |
| 632 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.362 inches, with a width of 15.748 inches, with a length not exceeding 12 feet. |
| 633 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.362 inches, with a width of 2.756 inches, with a length not exceeding 12 feet. |
| 634 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.362 inches, with a width of 3.15 inches, with a length not exceeding 12 feet. |
| 635 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 2.50 inches, with a length not exceeding 12 feet. |
| 636 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.50 inches, with a width of 3.00 inches, with a length not exceeding 12 feet. |
| 637 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.50 inches, with a width of 3.25 inches, with a length not exceeding 12 feet. |
| 638 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.50 inches, with a width of 3.50 inches, with a length not exceeding 12 feet. |
| 639 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.50 inches, with a width of 3.625 inches, with a length not exceeding 12 feet. |
| 640 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.50 inches, with a width of 4.00 inches, with a length not exceeding 12 feet. |
| 641 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.50 inches, with a width of 4.25 inches, with a length not exceeding 12 feet. |
| 642 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.50 inches, with a width of 4.50 inches, with a length not exceeding 12 feet. |
| 643 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.50 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 644 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.50 inches, with a width of 6.00 inches, with a length not exceeding 12 feet. |
| 645 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.50 inches, with a width of 7.00 inches, with a length not exceeding 12 feet. |
| 646 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 2.726 inches, with a length not exceeding 12 feet. |
| 647 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 2.75 inches, with a length not exceeding 12 feet. |
| 648 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.75 inches, with a width of 3.625 inches, with a length not exceeding 12 feet. |
| 649 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 2.771 inches, with a width of 5.133 inches, with a length not exceeding 12 feet. |
| 650 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 24.00 inches, with a length not exceeding 12 feet. |
| 651 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 3.00 inches, with a length not exceeding 12 feet. |
| 652 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.00 inches, with a width of 3.50 inches, with a length not exceeding 12 feet. |
| 653 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.00 inches, with a width of 4.00 inches, with a length not exceeding 12 feet. |
| 654 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.00 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 655 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.00 inches, with a width of 5.50 inches, with a length not exceeding 12 feet. |
| 656 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.00 inches, with a width of 6.00 inches, with a length not exceeding 12 feet. |
| 657 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.00 inches, with a width of 7.00 inches, with a length not exceeding 12 feet. |
| 658 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.00 inches, with a width of 8.00 inches, with a length not exceeding 12 feet. |
| 659 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.15 inches, with a width of 5.315 inches, with a length not exceeding 12 feet. |
| 660 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.25 inches, with a width of 4.75 inches, with a length not exceeding 12 feet. |
| 661 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.25 inches, with a width of 7.00 inches, with a length not exceeding 12 feet. |
| 662 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.25 inches, with a width of 8.00 inches, with a length not exceeding 12 feet. |
| 663 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 3.50 inches, with a length not exceeding 12 feet. |
| 664 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.50 inches, with a width of 4.50 inches, with a length not exceeding 12 feet. |
| 665 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.50 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 666 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.50 inches, with a width of 5.50 inches, with a length not exceeding 12 feet. |
| 667 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.50 inches, with a width of 6.00 inches, with a length not exceeding 12 feet. |
| 668 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.75 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 669 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.78 inches, with a width of 6.50 inches, with a length not exceeding 12 feet. |
| 670 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.80 inches, with a width of 6.80 inches, with a length not exceeding 12 feet. |
| 671 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.937 inches, with a width of 16.535 inches, with a length not exceeding 12 feet. |
| 672 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 3.937 inches, with a width of 9.449 inches, with a length not exceeding 12 feet. |
| 673 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 3.97 inches, with a length not exceeding 12 feet. |
| 674 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.00 inches, with a width of 12.00 inches, with a length not exceeding 12 feet. |
| 675 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 4.00 inches, with a length not exceeding 12 feet. |
| 676 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.00 inches, with a width of 4.50 inches, with a length not exceeding 12 feet. |
| 677 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.00 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 678 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.00 inches, with a width of 5.125 inches, with a length not exceeding 12 feet. |
| 679 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.00 inches, with a width of 6.00 inches, with a length not exceeding 12 feet. |
| 680 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.00 inches, with a width of 6.125 inches, with a length not exceeding 12 feet. |
| 681 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.00 inches, with a width of 7.00 inches, with a length not exceeding 12 feet. |
| 682 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.00 inches, with a width of 8.00 inches, with a length not exceeding 12 feet. |
| 683 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.00 inches, with a width of 8.50 inches, with a length not exceeding 12 feet. |
| 684 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.00 inches, with a width of 9.00 inches, with a length not exceeding 12 feet. |
| 685 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.031 inches, with a width of 5.842 inches, with a length not exceeding 12 feet. |
| 686 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 4.125 inches, with a length not exceeding 12 feet. |
| 687 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.173 inches, with a width of 7.402 inches, with a length not exceeding 12 feet. |
| 688 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.25 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 689 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.25 inches, with a width of 5.25 inches, with a length not exceeding 12 feet. |
| 690 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.30 inches, with a width of 6.50 inches, with a length not exceeding 12 feet. |
| 691 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.331 inches, with a width of 7.087 inches, with a length not exceeding 12 feet. |
| 692 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.37 inches, with a width of 8.50 inches, with a length not exceeding 12 feet. |
| 693 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 4.50 inches, with a length not exceeding 12 feet. |
| 694 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.50 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 695 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.50 inches, with a width of 5.50 inches, with a length not exceeding 12 feet. |
| 696 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.50 inches, with a width of 6.00 inches, with a length not exceeding 12 feet. |
| 697 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 4.688 inches, with a length not exceeding 12 feet. |
| 698 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.724 inches, with a width of 15.51 inches, with a length not exceeding 12 feet. |
| 699 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.75 inches, with a width of 6.25 inches, with a length not exceeding 12 feet. |
| 700 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 4.88 inches, with a width of 7.87 inches, with a length not exceeding 12 feet. |
| 701 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.00 inches, with a width of 10.00 inches, with a length not exceeding 12 feet. |
| 702 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 5.00 inches, with a length not exceeding 12 feet. |
| 703 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.00 inches, with a width of 5.15 inches, with a length not exceeding 12 feet. |
| 704 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.00 inches, with a width of 6.00 inches, with a length not exceeding 12 feet. |
| 705 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.00 inches, with a width of 7.00 inches, with a length not exceeding 12 feet. |
| 706 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.00 inches, with a width of 8.00 inches, with a length not exceeding 12 feet. |
| 707 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.00 inches, with a width of 8.25 inches, with a length not exceeding 12 feet. |
| 708 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.00 inches, with a width of 9.00 inches, with a length not exceeding 12 feet. |
| 709 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 5.03 inches, with a length not exceeding 12 feet. |
| 710 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.05 inches, with a width of 5.00 inches, with a length not exceeding 12 feet. |
| 711 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.25 inches, with a width of 10.00 inches, with a length not exceeding 12 feet. |
| 712 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 5.25 inches, with a length not exceeding 12 feet. |
| 713 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.25 inches, with a width of 5.375 inches, with a length not exceeding 12 feet. |
| 714 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.40 inches, with a width of 5.50 inches, with a length not exceeding 12 feet. |
| 715 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.44 inches, with a width of 5.50 inches, with a length not exceeding 12 feet. |
| 716 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.50 inches, with a width of 12.00 inches, with a length not exceeding 12 feet. |
| 717 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 5.50 inches, with a length not exceeding 12 feet. |
| 718 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.50 inches, with a width of 6.50 inches, with a length not exceeding 12 feet. |
| 719 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.50 inches, with a width of 8.375 inches, with a length not exceeding 12 feet. |
| 720 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 5.512 inches, with a width of 8.00 inches, with a length not exceeding 12 feet. |
| 721 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.00 inches, with a width of 10.00 inches, with a length not exceeding 12 feet. |
| 722 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.00 inches, with a width of 12.00 inches, with a length not exceeding 12 feet. |
| 723 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 6.00 inches, with a length not exceeding 12 feet. |
| 724 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.00 inches, with a width of 7.00 inches, with a length not exceeding 12 feet. |
| 725 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.00 inches, with a width of 7.25 inches, with a length not exceeding 12 feet. |
| 726 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.00 inches, with a width of 8.00 inches, with a length not exceeding 12 feet. |
| 727 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.00 inches, with a width of 8.00 inches, ultrasonically tested, with a length not exceeding 12 feet. |
| 728 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.00 inches, with a width of 8.25 inches, with a length not exceeding 12 feet. |
| 729 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.00 inches, with a width of 8.50 inches, with a length not exceeding 12 feet. |
| 730 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.00 inches, with a width of 9.00 inches, with a length not exceeding 12 feet. |
| 731 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.00 inches, with a width of 9.50 inches, with a length not exceeding 12 feet. |
| 732 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.05 inches, with a width of 7.34 inches, with a length not exceeding 12 feet. |
| 733 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 6.142 inches, with a length not exceeding 12 feet. |
| 734 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.50 inches, with a width of 8.00 inches, with a length not exceeding 12 feet. |
| 735 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.50 inches, with a width of 9.50 inches, with a length not exceeding 12 feet. |
| 736 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.625 inches, with a width of 9.00 inches, with a length not exceeding 12 feet. |
| 737 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 6.89 inches, with a width of 8.27 inches, with a length not exceeding 12 feet. |
| 738 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 7.00 inches, with a width of 10.00 inches, with a length not exceeding 12 feet. |
| 739 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 7.00 inches, with a width of 12.00 inches, with a length not exceeding 12 feet. |
| 740 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, of square cross-section with sides of 7.00 inches, with a length not exceeding 12 feet. |
| 741 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 7.00 inches, with a width of 8.00 inches, with a length not exceeding 12 feet. |
| 742 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 7.00 inches, with a width of 8.50 inches, with a length not exceeding 12 feet. |
| 743 | Acier | 7325.99.99 | Ductile iron bar of grade 65-45-12 of specification ASTM A536, with a thickness of 7.00 inches, with a width of 9.00 inches, with a length not exceeding 12 feet. |
| 744 | Acier | 7326.20.00 | Carbon steel fibers, of structural carbon steel, of specification ASTM A820 Type I, cold-drawn, in glued and non-glued configurations, with a length of at least 35 mm but not exceeding 50 mm |
| 745 | Acier | 7326.90.10 | Carbon steel dished pressure vessel heads, of grade ASME SA-516 or ASME SA-455, of specification ASME Section II Part A, with a nominal diameter of 30.00 inches, with a thickness of 0.174 inches, of ellipsoidal or hemispherical profile, certified to ASME Section II material test report requirements |
| 746 | Acier | 7326.90.90.90 | Taquet d’amarrage en acier, partiellement moulé, de nuance 65-35, de spécification ASTM A27, d’une largeur de 27,94 centimètres, d’une hauteur de 26,83 centimètres et d’une longueur de 44,45 centimètres, peint jaune |
| 747 | Acier | 7326.90.90.90 | Pieu d’amarrage cylindrique en acier au carbone, conforme à ASTM A252 grade 3, ASTM A500 grade B, API 5L grade X42 ou API 5L grade X52, assemblé par soudage, avec une épaisseur de 1,27 centimètre, une largeur de 67,31 centimètres, un diamètre extérieur de 60,96 centimètres et une longueur de 210,57 centimètres, peint jaune |
| 748 | Acier | 7326.90.90.90 | Clevises, socket eyes, anchor shackles, ball eyes, extension links, and suspension plates, of forged alloy steel, heat-treated, of Charpy Level 2 rating, with a width of at least 0.50 inches but not exceeding 2.50 inches, with a hole diameter of at least 0.625 inches but not exceeding 1.0625 inches, with a length of at least 2.00 inches but not exceeding 12.00 inches, with a load rating of at least 30 kN but not exceeding 444 kN, with a hot-dip galvanized coating |
| 749 | Acier | 7326.90.90.90 | Mild steel plates, of grade ASTM A36, cold-drawn, with a width of 48 mm, with a length of 46.75 inches, with a height of at least 22 mm but not exceeding 26 mm, with three holes of 8 mm diameter, with an outer tube polyvinyl chloride (PVC) coating |
| 750 | Acier | 7326.90.90.90 | Mild steel bars, of grade ASTM A36, cold-drawn, of a width of 38 mm, of a height of 22 mm, with a length of at least 20.75 inches but not exceeding 23.75 inches, with two holes of 12 mm diameter, polyvinyl chloride (PVC) coated |
| 751 | Acier | 7326.90.90.90 | Steel hoop components, with a diameter of at least 5 inches but not exceeding 9 inches, with a thickness of 5 mm, polyvinyl chloride (PVC) coated |
| 752 | Acier | 7326.90.90.90 | Stainless steel spikes, of grade 304, CNC machine-sharpened, of a diameter of 7 mm, with lengths of 11.5 inches, 13 inches, or 14.5 inches, with a base width of 43 mm, with a base length of 83 mm, with a hole diameter of at least 30 mm but not exceeding 33 mm, with a base plate of specification ASTM A240/A240M, with a rod of specification ASTM A276, polyethylene (PE) powder-coated |
| 753 | Aluminium | 7604.29.00 | Aluminum alloy bar, of grade 2024, of temper T3, of rectangular cross section, with a thickness of 1.50 inches, with a width of 2.00 inches, with a length not exceeding 12 feet |
| 754 | Aluminium | 7604.29.00 | Aluminum alloy bar, of grade 2024, of temper T3, of rectangular cross section, with a thickness of 2.50 inches, with a width of 3.50 inches, with a length not exceeding 12 feet |
| 755 | Aluminium | 7604.29.00 | Aluminum alloy bar, of grade 2024, of temper T3, of rectangular cross section, with a thickness of 3.00 inches, with a width of 3.50 inches, with a length not exceeding 144 inches |
| 756 | Aluminium | 7604.29.00 | Aluminum alloy bar, of grade 2024, of temper T3, of rectangular cross section, with a thickness of 3.25 inches, with a width of 3.50 inches, with a length not exceeding 144 inches |
| 757 | Aluminium | 7604.29.00 | Aluminum alloy bar, of grade 2024, of temper T3, of square cross-section with sides of 3.50 inches, with a length not exceeding 144 inches |
| 758 | Aluminium | 7604.29.00 | Aluminum alloy bar, of grade 2024, of temper T3, of rectangular cross section, with a thickness of 5.25 inches, with a width of 6.25 inches, with a length not exceeding 144 inches |
| 759 | Aluminium | 7604.29.00 | Aluminum alloy bar, of grade 2024, of temper T3, of rectangular cross section, with a thickness of 5.67 inches, with a width of 6.81 inches, with a length not exceeding 144 inches |
| 760 | Aluminium | 7604.29.00 | Aluminum alloy bar, of grade 2024, of temper T3, of square cross-section, with sides of 6.00 inches, with a length not exceeding 144 inches |
| 761 | Aluminium | 7604.29.00 | Aluminum alloy profiles,of grade 6063-T5, extruded, with a wall thickness of at least 1 mm but not exceeding 5 mm, with a width of at least 12 mm but not exceeding 90 mm, with a height of at least 12 mm but not exceeding 90 mm, with a length of 6.70 meters, powder coated or anodized |
| 762 | Aluminium | 7606.12.00 | Alumiunum plates, of grade 6061, in temper T6, with a thickness of 1 inch, with a width of 14 inches, with a length not exceeding 12 feet |
| 763 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 1.00 inches, with a width of 4.50 inches, with a length not exceeding 12 feet |
| 764 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 1.00 inches, with a width of 5.00 inches, with a length not exceeding 12 feet |
| 765 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 1.00 inches, with a width of 6.00 inches, with a length not exceeding 12 feet |
| 766 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, of square cross-section with sides of 10.00 inches, with a length not exceeding 12 feet |
| 767 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 10.00 inches, with a width of 11.00 inches, with a length not exceeding 12 feet |
| 768 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 10.00 inches, with a width of 12.00 inches, with a length not exceeding 12 feet |
| 769 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 10.00 inches, with a width of 13.00 inches, with a length not exceeding 12 feet |
| 770 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 12.00 inches, with a width of 16.00 inches, with a length not exceeding 12 feet |
| 771 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, of square cross-section with sides of 12.00 inches, with a length not exceeding 12 feet |
| 772 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 12.00 inches, with a width of 13.00 inches, with a length not exceeding 12 feet |
| 773 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 12.00 inches, with a width of 14.00 inches, with a length not exceeding 12 feet |
| 774 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 12.00 inches, with a width of 14.10 inches, with a length not exceeding 12 feet |
| 775 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061 and temper T6, with a thickness of 12.00 inches, with a width of 16.00 inches, with a length not exceeding 12 feet. |
| 776 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 12.688 inches, with a width of 13.25 inches, with a length not exceeding 12 feet |
| 777 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, of square cross-section with sides of 13.00 inches, with a length not exceeding 12 feet |
| 778 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 13.00 inches, with a width of 13.50 inches, with a length not exceeding 12 feet |
| 779 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 13.50 inches, with a width of 36.75 inches, with a length not exceeding 12 feet. |
| 780 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 14.00 inches, with a width of 22.00 inches, with a length not exceeding 12 feet |
| 781 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 2.00 inches, cut to a width of 12.752 inches, with a length not exceeding 12 feet |
| 782 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 2.00 inches, with a width of 13.50 inches, with a length not exceeding 12 feet |
| 783 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 2.75 inches, with a width of 8.00 inches, with a length not exceeding 12 feet |
| 784 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 3 inches, with a width of 9 inches, with a length not exceeding 12 feet. |
| 785 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 3.5 inches, with a width of 7.252 inches, with a length not exceeding 12 feet |
| 786 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 4 inches, with a width of 6.125 inches, with a length not exceeding 12 feet |
| 787 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 4 inches, with a width of 6.875 inches, with a length not exceeding 12 feet |
| 788 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 4.00 inches, with a width of 9.00 inches, with a length not exceeding 12 feet |
| 789 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 4.00 inches, with a width of 9.50 inches, with a length not exceeding 12 feet |
| 790 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 5.00 inches, with a width of 10.00 inches, with a length not exceeding 12 feet |
| 791 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 5.00 inches, with a width of 11.00 inches, with a length not exceeding 12 feet |
| 792 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 5.00 inches, with a width of 12.00 inches, with a length not exceeding 12 feet |
| 793 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 5.00 inches, of a width of 7.375 inches, with a length not exceeding 12 feet |
| 794 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 5.00 inches, with a width of 11.25 inches, ultrasonically tested, with a length not exceeding 12 feet. |
| 795 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, of square cross-section with sides of 5.00 inches, with a length not exceeding 12 feet. |
| 796 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thicknes of 6 inches, with a width of 10 inches, with a length not exceeding 12 feet |
| 797 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 6 inches, with a width of 10.25 inches, with a length not exceeding 12 feet |
| 798 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 6 inches, with a width of 12 inches with a length not exceeding 12 feet |
| 799 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 6 inches, with a width of 7 inches with a length not exceeding 12 feet |
| 800 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 6 inches, with a width of 7.25 inches with a length not exceeding 12 feet |
| 801 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 6 inches, with a width of 8.50 inches with a length not exceeding 12 feet |
| 802 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 6.5 inches, with a width of 9 inches with a length not exceeding 12 feet |
| 803 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 6.75 inches, with a width of 7 inches with a length not exceeding 12 feet |
| 804 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 7 inches, with a width of 14.125 inches with a length not exceeding 12 feet |
| 805 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 7 inches, with a width of 7 inches with a length not exceeding 12 feet |
| 806 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 7 inches, with a width of 9.125 inches with a length not exceeding 12 feet |
| 807 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 7.87 inches, with a width of 11.811 inches with a length not exceeding 12 feet |
| 808 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 8 inches, with a width of 10.25 inches with a length not exceeding 12 feet |
| 809 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 8 inches, with a width of 12 inches with a length not exceeding 12 feet |
| 810 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 8.5 inches, with a width of 12 inches with a length not exceeding 12 feet |
| 811 | Aluminium | 7606.12.00 | Aluminum plates, of grade 6061, in temper T6, with a thickness of 9 inches, with a width of 11 inches with a length not exceeding 12 feet |
| 812 | Aluminium | 7607.11.00 | Aluminum foil, not backed, rolled but not further worked, of alloy 1235, of temper H19, with a thickness of 0.05 mm and a width of 1,000 mm |
| 813 | Aluminium | 7607.11.00.30 | Aluminum foil, in rolls, of 1100 series alloy, with a thickness of 0.127 mm, with a width of 304.8 mm, with 3A molecular sieve desiccant. |
| 814 | Aluminium | 7607.11.00.30 | Hard aluminium foil, plastic layer of thickness 25 μm; of grade USP 661.1, AL201CHM; of roller width 198 mm; of core diameter of at least 74 mm but not exceeding 78mm; compliant with USFDA title 21 code of federal regulations sections175.30; heatseal coating LX4DP and lacquer based on polyester. |
| 815 | Aluminium | 7607.20.00.90 | Soft tempered aluminum foil, of grade USP 661, CF501CSM, of core layer thickness of 0.045 mm, plastic layer of thickness 25 μm, PVC layer of thickness 60 μm, roller width of 198 mm, core diameter of at least 74.0 mm but not exceeding 78 mm; USFDA, compliant title 21 code of federal regulations sections 170 to 199. |
| 816 | Aluminium | 7608.20.00.00 | Extruded tube, of aluminum, of 6063 grade governed by ASTM B221 specification, of UL797A standard or equivalent, threaded on both ends, with a circular cross-section, with a wall thickness of a minimum of 2.62mm and not exceeding 6.83mm, with an external diameter not exceeding 170mm. |
| 817 | Aluminium | 7609.00.00.00 | Mamelon de tuyauterie en alliage d’aluminium 6061-T6, type à souder bout à bout, fabriqué à partir de tube extrudé ou usiné, conçu pour le raccordement ou l’extension de conduites de fluides dans des systèmes de tuyauterie de transport, préparée pour assemblage permanent par soudage |
| 818 | Aluminium | 7609.00.00.00 | Bride aluminium en alliage 6061-T6, type slip-on, avec face avec une configuration de trous de boulons conformes aux normes ANSI pour assemblage boulonné de conduites de fluides. |
| 819 | Aluminium | 7609.00.00.00 | Aluminum tube couplings, of 6063 grade governed by ASTM B221 specification, of UL514B standard or equivalent, with a circular cross section, meeting the requirements of UL6A for straight-tapped thread with a minimum pitch diameter of 16.4mm and not exceeding 167.1mm. |
| 820 | Aluminium | 7609.00.00.00 | Tube nipples of aluminum, of 6063 grade governed by ASTM B221 specification, of UL514B standard or equivalent, with a circular cross section, with a minimum external diameter of 16.77mm and not exceeding 169.96mm |
| 821 | Aluminium | 7609.00.00.00 | Tube elbows of aluminum, of 6063 grade governed by ASTM B221 specification, of UL797A or equivalent, of a circular cross-section, with a minimum external diameter of 16.77mm and not exceeding 169.96mm. |
| 822 | Aluminium | 7610.10.00 | Thermally broken extruded aluminum vertical jamb adaptor profile, for use in aluminum window and door frame systems, with a length of 192 inches |
| 823 | Aluminium | 7610.10.00 | Thermally broken extruded aluminum head and sill adaptor profiles, for use in aluminum window and door frame systems, with a length of 192 inches, with integral fastening cavities, drainage paths, and glazing interface geometry. |
| 824 | Aluminium | 7610.10.00 | Factory-assembled thermally broken aluminum fixed picture window unit with insulated glazing, with a width of 30 inches and a height between 48 inches and 72 inches. |
| 825 | Aluminium | 7610.10.00 | Factory-assembled thermally broken aluminum dual sliding window unit with operable sash members, insulated glazing and weather seals, with a width of 60 inches and a height between 48 and 72 inches. |
| 826 | Aluminium | 7610.10.00 | Extruded aluminum H-shaped or T-shaped connector channel profiles, for use in aluminum window and door frame systems, with a length of approximately 99 inches |
| 827 | Aluminium | 7610.10.00 | Formed or extruded aluminum H-channel cladding profile, for use in aluminum window and door frame systems, with a length of 240 inches. |
| 828 | Aluminium | 7610.10.00 | Formed or extruded aluminum closed sill cladding profile, for use in aluminum window and door frame systems, with a length of 240 inches |
| 829 | Aluminium | 7610.10.00.30 | Aluminum-framed dual slider window inserts, for use in aluminum window systems, with a width of 59.25 inches |
| 830 | Aluminium | 7610.90.90 | Extruded aluminum wall and eave cladding profile, for use in construction systems, with a length of 240 inches |
| 831 | Aluminium | 7610.90.90 | Formed aluminum 45-degree corner cladding profile, for use in construction systems, with a length of 198 inches |
| 832 | Aluminium | 7610.90.90.90 | Handrail tubing, of aluminum alloy 6063, T5, with a nominal wall thickness of 0.08 inches, wood veneer wrapped with a cloth backing, with a thickness of 0.015 inches bonded using a UV-activated urethane adhesive, with a circular profile with a diameter of 1.64 inches, with a length of 16 feet, clear polyurethane coated, prefinished |
| 833 | Aluminium | 7610.90.90.90 | Structural extruded aluminum roof glazing bar assembly configured for a 7:12 roof pitch, with a length of 60 inches, comprising a 4-piece assembly with two truss members, with integral glazing channels, fastening geometry, and pressure cap interfaces. |
| 834 | Aluminium | 7610.90.90.90 | Structural extruded aluminum roof glazing bar profile configured for a 7:12 roof pitch, with a length of 60 inches, comprising a 2-piece assembly without truss members. |
| 835 | Aluminium | 7610.90.90.90 | Structural extruded aluminum glazing bar assembly with a curved bullnose profile, configured for a 7:12 roof pitch, with a length of 60 inches. |
| 836 | Aluminium | 7610.90.90.90 | Extruded structural aluminum vertical mullion profiles, supplied as a multi-component full-height framing members for 3-bay systems consisting of four 3 inch vertical H channels measuring 81.625 inches long, four 3 inch vertical H channels measuring 11.625 inches long, two 3 inch horizontal sill channels and one bag of 100 pieces of 8 inch by 0.5 inch stainless steel fasteners. |
| 837 | Aluminium | 7610.90.90.90 | Extruded structural aluminum vertical support profiles for 45-degree faceted bullnose wall geometry, supplied as a multi-component full-height-plus-fixed-extension package, with integral glazing interface features and fastening receivers. Consists of one 3 inch vertical H channels measuring 71.5625 inches long, four 3 inch vertical H channels measuring 11.625 inches long, four 3 inch vertical 45 degree corner channels and one bag of 100 pieces of 8 inch by 0.5 inch stainless steel fasteners. |
| 838 | Aluminium | 7610.90.90.90 | Structural extruded aluminum eave beam, supplied as a 3-bay assembly in right-hand and left-hand versions, with integral gutter attachment features. |
| 839 | Aluminium | 7610.90.90.90 | Structural extruded aluminum eave beam assembly with a curved faceted bullnose profile, supplied as a 3-bay assembly, with integral drainage support and roof framing interface features. |
| 840 | Aluminium | 7610.90.90.90 | Aluminum gutters, with a length of 96 inches |
| 841 | Aluminium | 7610.90.90.90 | Aluminum gutter section, with a thickness of 0.050 inches, with a length of approximately 63.88 inches. |
| 842 | Aluminium | 7610.90.90.90 | Formed aluminum gutter end caps, supplied in left-hand and right-hand versions |
| 843 | Aluminium | 7610.90.90.90 | Fabricated aluminum 45-degree corner gutter miter assemblies |
| 844 | Aluminium | 7610.90.90.90 | Aluminum gutter ladder support clips, with a length of 1.5 inches |
| 845 | Aluminium | 7616.10.00.90 | Aluminum alloy clips, of grade 5052-H36, stamped, with a thickness of at least 0.040 inches but not exceeding 0.050 inches, with a width of at least 0.75 inches but not exceeding 0.875 inches, with a length of at least 0.92 inches but not exceeding 1.32 inches, collated in strips |
| 846 | Aluminium | 7616.99.90 | Flagpole topper of iron or non-alloy steel, in the form of a maple leaf, with a total height of 12.25 inches, with a width of 4 inches, with a thickness of 0.210 inches, mounted on an aluminum spindle with a diameter of 0.5 inches and a length of 6 inches |
| 847 | Composants pour barbecue | 7616.99.90.90 | Lid for outdoor cooking appliance, of aluminum alloy A383, with a length of 617.5 mm, a width of 418.0 mm, with a height of 277.9 mm, with powder coating |
| 848 | Composants pour barbecue | 7616.99.90.90 | Top casting with heat indicator hole for outdoor cooking appliance, of aluminum alloy A383, with a length of 615.6 mm, a width of 418.0 mm, and a height of 286.8 mm, powder coated |
| 849 | Composants pour barbecue | 7616.99.90.90 | Bottom castings for gas grills, of aluminum alloy A383, produced by thin-wall casting, with a length of 691.0 mm, with a width of 482.6 mm, with a height of 191.5 mm, with a wall thickness of 2.5 mm, uncoated |
| 850 | Composants pour barbecue | 7616.99.90.90 | Bottom casting for gas grill, of aluminum alloy A383, produced by thin-wall casting, with a length of 853.0 mm, with a width of 482.6 mm, with a height of 191.5 mm, with a wall thickness of 2.5 mm, uncoated |
| 851 | Composants pour barbecue | 7616.99.90.90 | Bottom casting for outdoor cooking appliance, of aluminum alloy A383, with a length of 593.09 mm, with a width of 214.0 mm, with a height of 336.52 mm, powder coated |
| 852 | Composants pour barbecue | 7616.99.90.90 | Top lid castings for gas grills, of aluminum alloy A383, produced by thin-wall casting, with a length of 510.0 mm, with a width of 369.1 mm, with a height of 190.5 mm, with a wall thickness of 1.8 mm, uncoated |
| 853 | Composants pour barbecue | 7616.99.90.90 | Lid castings for gas grills, of aluminum alloy A383, produced by thin-wall casting, with a length of 585.5 mm, with a width of 408.9 mm, with a height of 222.4 mm, with a wall thickness of 1.8 mm, uncoated |
| 854 | Composants pour barbecue | 7616.99.90.90 | Lid castings with front handle provision for gas grills, of aluminum alloy A383, produced by thin-wall casting, with a length of 627.3 mm, with a width of 437.6 mm, with a height of 281.0 mm, with a wall thickness of 2.0 mm, uncoated |
| 855 | Composants pour barbecue | 7616.99.90.90 | Lid castings with front handle provision for gas grills, of aluminum alloy A383, produced by thin-wall casting, with a length of 728.3 mm, with a width of 437.6 mm, with a height of 281.0 mm, with a wall thickness of 2.0 mm, uncoated |
| 856 | Composants pour barbecue | 7616.99.90.90 | Bottom castings for gas grills, of aluminum alloy A383, produced by thin-wall casting, with a length of 574.0 mm, with a width of 357.2 mm, with a height of 194.9 mm, with a wall thickness of 2.1 mm, uncoated |
| 857 | Composants pour barbecue | 7616.99.90.90 | Bottom castings for gas grill, of aluminum alloy A383, produced by thin-wall casting, with a length of 590.4 mm, with a width of 429.0 mm, with a height of 245.9 mm, with a wall thickness of 2.5 mm, uncoated |
| 858 | Composants pour barbecue | 7616.99.90.90 | Bottom casting for gas grill, of aluminum alloy A383, produced by thin-wall casting, with a length of 697.7 mm, with a width of 435.4 mm, with a height of 234.1 mm, with a wall thickness of 1.9 mm, uncoated |
| 859 | Composants pour barbecue | 7616.99.90.90 | Bottom casting for gas grill, of aluminum alloy A383, produced by thin-wall casting, with a length of 574.0 mm, with a width of 357.2 mm, with a height of 194.9 mm, with a wall thickness of 2.1 mm, uncoated |
| 860 | Composants pour barbecue | 7616.99.90.90 | Bottom casting for gas grill, of aluminum alloy A383, produced by thin-wall casting, with a length of 517.1 mm, with a width of 482.6 mm, with a height of 206.0 mm, with a wall thickness of 2.7 mm, uncoated |
| 861 | Composants pour barbecue | 7616.99.90.90 | Bottom castings for gas grills, of aluminum alloy A383, produced by thin-wall casting, with a length of 517.1 mm, with a width of 482.6 mm, with a height of 205.0 mm, with a wall thickness of 2.7 mm, high-temperature black painted |
| 862 | Composants pour barbecue | 7616.99.90.90 | Bottom castings for gas grills, of aluminum alloy A383, produced by thin-wall casting, with a length of 691.1 mm, with a width of 482.6 mm, with a height of 205.0 mm, with a wall thickness of 2.7 mm, uncoated |
| 863 | Composants pour barbecue | 7616.99.90.90 | Bottom castings for gas grills, of aluminum alloy A383, produced by thin-wall casting, with a length of 691.1 mm, with a width of 482.6 mm, with a height of 205.0 mm, with a wall thickness of 2.7 mm, high-temperature black painted |
| 864 | Composants pour barbecue | 7616.99.90.90 | Bottom castings for gas grills, of aluminum alloy A383, produced by thin-wall casting, with a length of 853.1 mm, with a width of 482.6 mm, with a height of 205.0 mm, with a wall thickness of 2.7 mm, uncoated |
| 865 | Aluminium | 7616.99.90.90 | Aluminum telescoping flagpole tube, of alloy 6105, of temper T5, with a length of at least 72 inches but not exceeding 86 inches, with an outer diameter of 1.6875 inches, with nominal trade size of 1.7 inches, with an inner diameter of 1.5625 inches, with a wall thickness of 0.065 inches |
| 866 | Aluminium | 7616.99.90.90 | Aluminum telescoping flagpole tube, of alloy 6105, of temper T5, with a length of at least 72 inches but not exceeding 86 inches, with an outer diameter of 2.09375 inches, with nominal trade size of 2.115 inches, with an inner diameter of 1.96875 inches, with a wall thickness of 0.065 inches |
| 867 | Aluminium | 7616.99.90.90 | Aluminum telescoping flagpole tubes, of alloy 6105, of temper T5, with a length of at least 72 inches but not exceeding 86 inches, with an outer diameter of 2.5625 inches, with a nominal trade size of 2.55 inches, with an inner diameter of 2.40625 inches, with a wall thickness of 0.08 inches |
| 868 | Aluminium | 7616.99.90.90 | Aluminum telescoping flagpole tubes, of alloy 6105, of temper T5, with a length of at least 72 inches but not exceeding 86 inches, with an outer diameter of 3 inches, with an inner diameter of 2.84375 inches, with a wall thickness of 0.08 inches |
| 869 | Aluminium | 7616.99.90.90 | Aluminum hitch mounts, of alloy 6005, of temper T6, with an inner diameter of 3.4 inches, with an outer diameter of 3.625 inches, with a wall thickness of 0.125 inches, with hitch welded to 2.0 inch by 12 inch plate of aluminum for mounting to vehicle |
| 870 | Aluminium | 7616.99.90.90 | Aluminum side mount kits, of alloy 6005, of temper T6, with an inner diameter of 3.4 inches, with an outer diameter of 3.625 inches, with a wall thickness of 0.125 inches, with side mount welded to two aluminum brackets of 2 inches by 7 inches for mounting purposes |
| 871 | Aluminium | 7616.99.90.90 | Aluminum top mount kits, of alloy 6005, of temper T6, with an inner diameter of 3.4 inches, with an outer diameter of 3.625 inches, with a wall thickness of 0.125 inches, with top mount welded onto a plate of aluminum measuring 8 inches by 8 inches |
| 872 | Aluminium | 7616.99.90.90 | Aluminum tubes, of alloy 6105, of temper T5, with a length of 72 inches, with an outer diameter of 1.6875 inches, with a nominal trade size of 1.7 inches, with an inner diameter of 1.5625 inches, and with a wall thickness of 0.065 inches |
| 873 | Aluminium | 7616.99.90.90 | Aluminum wheel stand kits, of alloy 6005, of temper T6, with an inner diameter of 3.4 inches, with an outer diameter of 3.625 inches, with a wall thickness of 0.125 inches, with wheel stand welded onto plate of aluminum measuring 8 inches by 30 inches |
| 874 | Aluminium | 7616.99.90.90 | Aluminum collar (flash collar), of alloy 1100, of temper H10, with a hole with an inner diameter of 3.125 inches, with an outer plate diameter of 12 inches, with a height of 1.75 inches, with a wall thickness of 0.0625 inches |
| 875 | Aluminium | 7616.99.90.90 | Welded aluminum pallet, of grade 6061 or 6005-T6, with all-welded construction from extruded aluminum profiles, with a footprint of 48 inches by 40 inches or 48 inches by 48 inches, with a self-weight of at least 30 lbs but not exceeding 45 lbs, with a static load capacity not exceeding 20,000 lbs, with a dynamic load capacity of at least 4,000 lbs but not exceeding 6,000 lbs, and with a rack load capacity of at least 4,000 lbs but not exceeding 5,000 lbs. |
| 876 | Aluminium | 7616.99.90.90 | Aluminum hoop components, with a diameter of at least 5 inches but not exceeding 9 inches, with a thickness of 5 mm |
| 877 | Lames et outils | 8208.40.00.20 | Heat treated steel reciprocating knife sections, triangular or elongated profile, carbon steel construction with corrosion resistant coating; single hole, double hole, and slotted mounting configurations for rivet or bolt attachment; approximate thickness 2-5 mm; approximate width 20-60 mm; approximate length 50-120 mm; includes overlap sections, countersunk overlap sections, end sections, and bolt on knife sections. |
| 878 | Lames et outils | 8208.40.00.20 | Heat treated steel reciprocating knife assemblies; assembled steel knife back with mounted knife sections; corrosion resistant coated steel construction; precision machined fastening points and mounting holes; left hand and right hand drive configurations; approximate assembly length 8-40 feet; includes overlap and double drive configurations. |
| 879 | Aluminium | 8306.29.00 | Decorative cast aluminum roof ridge cresting, with a length of 465.1375 mm per piece |
| 880 | Aluminium | 8306.29.00 | Decorative cast aluminum roof finials |
| 881 | Électroménager | 8419.81.00.90 | Electric popcorn popping machine, of stainless steel, with a 70 ounce electrically heated popping kettle, with an electrical rating of 230 volts, single-phase, 60 hertz, 7 kilowatts per unit |
| 882 | Lames et outils | 8433.90.00.30 | Forged or cast steel guards for agricultural harvesting cutter bar assemblies; single prong, double prong, center guard, end guard, and triple guard configurations; wear resistant hardened steel construction; corrosion resistant coating; mounting base with precision bolt holes; approximate width 2-6 inches; approximate length 3-8 inches. Includes standard guards, overlap guards, and cutter bar end guards. |
| 883 | Lames et outils | 8433.90.00.30 | Formed steel crop lifters for agricultural harvesting cutter bar assemblies; curved and tapered profile; corrosion resistant coated steel construction; mounting slot or bolt hole attachment configuration; approximate length 6-18 inches; approximate width 1-4 inches. Includes flexible and rigid crop lifter configurations with steel mounting brackets and spacer attachments. |
| 884 | Lames et outils | 8433.90.00.30 | Machined or stamped steel spacers for agricultural harvesting cutter bar assemblies; cylindrical or rectangular profile; hardened or coated steel construction; center mounting hole or slotted opening; approximate thickness 2-20 mm; approximate diameter or width 10-50 mm. Includes spacer components for crop lifter and cutter bar mounting assemblies. |
| 885 | Lames et outils | 8433.90.00.30 | Circular steel bearing protection discs for agricultural harvesting machinery; stamped or machined steel construction; corrosion resistant coating; center mounting hole; smooth or reinforced outer edge; approximate diameter 3-12 inches; approximate thickness 2-8 mm. Includes bearing protection discs and rotating shield components for harvesting cutter assemblies |
| 886 | Lames et outils | 8433.90.00.30 | Machined or formed steel connector bottom assemblies for reciprocating cutter systems; rectangular or contoured profile; precision mounting holes and fastening points; corrosion resistant coated steel construction; approximate length 2-8 inches; approximate width 1-4 inches. Includes knife connector bars, threaded connector bars, splice kits, overlap kits, and connector bearing assemblies. |
| 887 | Serres et pièces associées | 8436.80.00.29 | Commercial greenhouse energy-screen systems presented as unassembled functional units, comprising a movable screen cloth, aluminum leading-edge profiles, a cable drive mechanism, steel support cables and mounting hardware |
| 888 | Serres et pièces associées | 8436.80.00.29 | Commercial greenhouse hydronic heating and carbon dioxide dosing systems presented as unassembled functional units, comprising boiler-room distribution and mixing groups, pre-insulated transport piping, pipe-rail and grow-pipe heating loops, a plate heat exchanger, water-treatment equipment and a flue-gas carbon dioxide recovery and distribution system |
| 889 | Serres et pièces associées | 8436.80.00.29 | Commercial greenhouse roof-ventilation systems presented as unassembled functional units, comprising aluminum roof glazing bars and gutters, ventilation window sashes, a rack-and-pinion drive mechanism, steel push rods and drive tubes, and mounting hardware |
| 890 | Aluminium | 8716.90.90.90 | Tête de citerne, en alliage d’aluminium 5454-O, usiné, pour remorques-citernes, avec un diamètre de 84 pouces, d'une épaisseur excédant 9 mm |
| 891 | Luminaires | 9405.41.00 | Solar-powered light fixture for a flagpole, with plastic housing, with a diameter of 10.125 inches, with a height of 1.25 inches, comprising 5 solar panels and 20 LED lights |
| 892 | Structures métalliques | 9406.20.00.00 | Prefabricated modular building units, of steel, comprising galvanized structural framing members including columns, tie beams, bracing and roof trusses, integrated wall, gable and corner wall panels, and steel roofing and cladding, finished with a polyvinylidene fluoride paint coating, steel grade Q235B in accordance with GB/T 700. The structural design and calculations have been carried out in accordance with the Canadian steel design standard CSA S16 |
| 893 | Serres et pièces associées | 9406.90.90.90 | Unassembled multi-span glass-covered commercial greenhouses of Venlo type with various peak widths on trusses of various widths, together with an aluminum roof glazing system, aluminum ventilation windows and glazing of glass of a thickness of 4 mm, with a load-bearing steel frame comprising: • cold-formed welded hollow steel sections of grade S350GD meeting EN 10346, formed and welded to EN 10219, continuously hot-dip galvanized with a zinc coating of designation Z275 and a coating mass of 275 grams per square meter, with wall thicknesses of at least 2.0 mm but not exceeding 4.0 mm • columns of rectangular hollow steel sections with cross-sections specifically sourced for each project based on design loads, materials availability/price and greenhouse systems requirements • steel roof trusses of custom sizes, assembled from rectangular and square hollow sections, L sections and welded plates • purlins of U steel sections, cross and wind bracing, and steel service and support rails • welded steel brackets, consoles, tabs and connection plates • hot-rolled steel I sections and plates of structural grade S235 to S355 meeting EN 10025-2, used as pipe carriers and connection plates |
*Pour certains produits, le code SH approprié reste à déterminer (à confirmer). Dans ces cas, deux codes SH potentiels ont été inclus à titre examen. Toutefois, seul le code SH le plus approprié serait inclus dans le décret de remise, s’il est approuvé.
Confidentialité
Les informations reçues dans le cadre de cette procédure de soumission sont soumises à la loi sur l'accès à l'information et à la loi sur la protection de la vie privée et sont collectées en vertu de la loi sur la gestion des finances publiques. La participation à ces consultations est volontaire et n'aura aucune incidence sur les services que vous recevez du gouvernement du Canada. Les informations personnelles fournies sur ce formulaire sont collectées pour permettre aux individus de participer à des activités de sensibilisation nationales et/ou internationales, ainsi que pour mettre en relation les entreprises qui demandent une remise en raison d'une offre insuffisante avec les fabricants canadiens qui se sont identifiés dans le cadre de ces consultations.
La collecte, l'utilisation, la divulgation et la conservation de vos renseignements personnels sont conformes aux exigences de la Loi sur la protection des renseignements personnels et sont décrites plus en détail dans les fichiers de renseignements personnels suivants - POU 938 (Activités de sensibilisation) et POU 914 (Communications publiques). Vous avez le droit d'accéder à vos informations personnelles et d'en demander la correction. Si vous avez des questions concernant la protection de vos renseignements personnels, veuillez communiquer avec le coordonnateur de l'accès à l'information et de la protection des renseignements personnels (AIPRP) du ministère des Finances du Canada à l'adresse suivante : atip-aiprp@fin.gc.ca. Si vous n'êtes pas satisfait de la réponse apportée à vos préoccupations en matière de protection de la vie privée, vous avez le droit de déposer une plainte auprès du Commissariat à la protection de la vie privée du Canada concernant le traitement de vos informations personnelles par le ministère.